GY-521 MPU6050 3 Axis Analog Gyro Sensor
GY 521 MPU6050 Sensor Features
- MEMS 3-aixs accelerometer and 3-axis gyroscope values combined
- Power Supply: 3-5V
- Communication : I2C protocol
- Built-in 16-bit ADC provides high accuracy
- Built-in DMP provides high computational power
- Can be used to interface with other IIC devices like magnetometer
- Configurable IIC Address
- In-built Temperature sensor
₨400
CompareGY 521 MPU6050 Sensor Details
The MPU-6050 is a serious little piece of motion processing tech! By combining a MEMS 3-axis gyroscope and a 3-axis accelerometer on the same silicon die together with an onboard Digital Motion Processor™ (DMP™) capable of processing complex 9-axis MotionFusion algorithms, the MPU-6050 does away with the cross-axis alignment problems that can creep up on discrete parts.
MPU6050 / GY-521, 3 Axis Analog Gyro Sensor
Our breakout board for the MPU-6050 makes this tiny QFN package easy to work into your project. Every pin you need to get up and running is broken out to 0.1″ headers, including the auxiliary master I2C bus which allows the MPU-6050 to access external magnetometers and other sensors
“>
Based on 0 reviews
Be the first to review “GY-521 MPU6050 3 Axis Analog Gyro Sensor”
You must be logged in to post a review.
Related products
-
Sensors
TCRT5000 IR Sensor
TCRT5000 IR Sensor Features:
- Package type: leaded
- Detector type: phototransistor
- Dimensions (L x W x H in mm): 10.2 x 5.8 x 7
- Peak operating distance: 2.5 mm
- Operating range within > 20 % relative collector current: 0.2 mm to 15 mm
- Typical output current under test: IC = 1 mA
- Daylight blocking filter
- Emitter wavelength: 950 nm
- Lead (Pb)-free soldering released
- Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC
SKU: n/a -
Sensors
DS18B20 Temperature Sensor
DS18B20 Temperature Sensor Key Features
- Unique 1-Wire® Interface Requires Only One Port Pin for Communication
- Reduce Component Count with Integrated Temperature Sensor and EEPROM
- Measures Temperatures from -55°C to +125°C (-67°F to +257°F)
- ±0.5°C Accuracy from -10°C to +85°C
- Programmable Resolution from 9 Bits to 12 Bits
- No External Components Required
- Parasitic Power Mode Requires Only 2 Pins for Operation (DQ and GND)
- Simplifies Distributed Temperature-Sensing Applications with Multidrop Capability
- Each Device Has a Unique 64-bit Serial Code Stored in an On-Board ROM
- Flexible User-Definable Nonvolatile (NV) Alarm Settings with Alarm Search Command Identifies Devices with Temperatures Outside Programmed Limits
- Available in 8-Pin SO (150 mils), 8-Pin µSOP, and 3-Pin TO-92 Packages
SKU: n/a -
Sensors
LM35 Waterproof Temperature Sensor
LM35 Waterproof Temperature Sensor Specifications:
- Directly Celsius temperature calibration;
- Linear :+ 10.0mV / ℃;
- Ensure the accuracy : 0.5 ℃ (at + 25 ℃ when);
- Temperature range : 0 ℃ ~ 100 ℃
- Direct output voltage signal;
- Internally precision fine-tuning;
- Wide supply voltage:4 ~ 30V;
- Operating current: Less than 60μA;
- Low self-heating, in still air 0.1 ℃;
- Only non-linear value ± 1/4 ℃ of;
- Low-impedance output, 0.1Ω at 1mA load
SKU: n/a -
Sensors
TCRT5000 Line Following Sensor Module
Features:
- Supply Voltage: 3.3V~5V DC
- Detection distance: 1mm – 8mm
- Digital Outputs HIGH when an object is detected
- On-board indicator LED to show the results
- On-board potentiometer to adjust the sensitivity
- On-board LM393 chip
- Usually used for line following robot
SKU: n/a
There are no reviews yet.