MOSFETs, IGBTs and BJTs
IR2118 IC DIP8 IR2118S SOP8 Driver
Features
- Floating channel designed for bootstrap operation
- Fully operational to +600 V
- Tolerant to negative transient voltage
- dV/dt immune
- Gate drive supply ranges from 10 to 20 V
- Undervoltage lockout
- CMOS Schmitt-triggered inputs with pull-down
- Output out of phase with input (IR2118) or in phase with input (IR2117 )
₨150 – ₨180
CompareIR2118 IC/ IR2118S IC Driver is a high voltage, high-speed power MOSFET and IGBT driver. Proprietary HVIC and latch-immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS outputs. The IR2118 IC/ IR2118S IC output driver features a high pulse current buffer stage designed for minimum cross-conduction. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high or low side configuration which operates to 600 volts.
Fully operational to +600V Tolerant to negative transient voltage dV/dt immune Gate drive supply range from to 20V Undervoltage lockout CMOS Schmitt-triggered inputs with pull-down Output in phase with input (IR2117)
IR2118S IC in pakistan
IR2118 IC in pakistan
| Version | IR2118 DIP, IR2118S SOP |
|---|
Related products
-
MOSFETs, IGBTs and BJTs
IR2110 IC DIP14 IR2110S SOP16 Driver
IR2110 IC/IR2110S IC Features- Floating channel designed for bootstrap operation
- Fully operational to +500 V
- Fully operational to +600 V version available (IR2113)
- dV/dt immune
- Gate drive supply ranges from 10 to 20 V
- Undervoltage lockout for both channels
- 3.3 V logic compatible
- Separate logic supply range from 3.3 V to 20 V
- Logic and power ground + /- 5 V offset
- CMOS Schmitt-triggered inputs with pull-down
- Cycle-by-cycle edge-triggered shutdown logic
- Matched propagation delay for both channels
- Outputs in phase with inputs
SKU: n/a -
ICs and Optocouplers, MOSFETs, IGBTs and BJTs
TLP352 IC DIP8 TLP352S SOP8 Driver
Features:
- Buffer logic type (totem pole output)
- Output peak current: ±2.5 A (max)
- Operating temperature: -40 to 125 C
- Supply current: 3.0 mA (max)
- Supply voltage: 15 to 30 V
- Threshold input current: 5 mA (max)
- Propagation delay time: 200 ns (max)
- Common-mode transient immunity: ±20 kV/µs (min)
- Isolation voltage: 3750 Vrms (min)
- Safety standards
- UL-approved: UL1577, File No.E67349
- cUL-approved: CSA Component Acceptance Service No.5A File No.E67349
- VDE-approved: EN60747-5-5
SKU: n/a -
MOSFETs, IGBTs and BJTs
IR2153 IC DIP8 MOSFET Driver
IR2153 IC Features- Integrated 600 V half-bridge gate driver
- 15.6 V zener clamp on VCC
- True micropower start-up
- Tighter initial deadtime control
- Low temperature coefficient deadtime
- Shutdown feature (1/6th Vcc) on CT pin
- Increased undervoltage lockout Hysteresis (1 V)
- Lower power level-shifting circuit
- Constant LO, HO pulse widths at startup
- Lower di/dt gate driver for better noise immunity
- Low side output in phase with RT
- Excellent latch immunity on all inputs and outputs
- ESd protection on all leads
SKU: n/a -
MOSFETs, IGBTs and BJTs
IR2136S IC SOP28 MOSFET Driver
IR2136S IC Features- Floating channel designed for bootstrap operation
- Fully operational to +600 V
- Tolerant to negative transient voltage, dV/dt immune
- Gate drive supply ranges from 10 V to 20 V (IR2136/IR21368), 11.5 V to 20 V (IR21364), or 12 V to 20 V (IR21363/IR21365/IR21366)
- Under-voltage lockout for all channels
- Over-current shutdown turns off all six drivers
- Independent 3 half-bridge drivers
- Matched propagation delay for all channels
- Cross-conduction prevention logic
- Low side output out of phase with inputs, high side outputs out of phase. (IR2136/IR21363/IR21365/IR21366/IR21368)
- Low side and high side outputs in phase with inputs. (IR21364)
- 3.3 V logic compatible
- Lower di/dt gate drive for better noise immunity
- Externally programmable delay for automatic fault clear
- LEAD-FREE and RoHS Compliant
SKU: n/a -
MOSFETs, IGBTs and BJTs
IR2103 IC DIP8 IR2103S SOP8 Driver
Features- Floating channel designed for bootstrap operation
- Fully operational to +600 V
- Tolerant to negative transient voltage
- dV/dt immune
- Gate drive supply range from 10 to 20 V
- Undervoltage lockout
- 3.3 V, 5 V, and 15 V logic input compatible
- Cross-conduction prevention logic
- Matched propagation delay for both channels
- Internal set deadtime
- High side output in phase with HIN input
- Low side output out of phase with LIN input
SKU: n/a
