IR2110 IC DIP14 IR2110S SOP16 Driver
- Floating channel designed for bootstrap operation
- Fully operational to +500 V
- Fully operational to +600 V version available (IR2113)
- dV/dt immune
- Gate drive supply ranges from 10 to 20 V
- Undervoltage lockout for both channels
- 3.3 V logic compatible
- Separate logic supply range from 3.3 V to 20 V
- Logic and power ground + /- 5 V offset
- CMOS Schmitt-triggered inputs with pull-down
- Cycle-by-cycle edge-triggered shutdown logic
- Matched propagation delay for both channels
- Outputs in phase with inputs
₨225 – ₨400
CompareThe IR2110 IC / IR2110S IC are high voltage, high-speed power MOSFET and IGBT drivers with independent high and low side referenced output channels.
Proprietary HVIC and latch-immune CMOS technologies enable ruggedized monolithic construction.
Logic inputs are compatible with standard CMOS or LSTTL output, down to 3.3V logic.
The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction.
Propagation delays are matched to simplify use in high-frequency applications. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high-side configuration.
Gate drive supply ranges from 20V Undervoltage lockout for both channels to 3.3V logic-compatible.
CMOS Schmitt-triggered inputs with pull-down Cycle by cycle edge-triggered shutdown logic Matched propagation delay for both channels Outputs in phase with inputs
IR2110 IC price in pakistan
IR2110s IC price in pakistan
| Version | IR2210 DIP (New), IR2210S SOP, IR2210 DIP (Refurbished) |
|---|
Related products
-
MOSFETs, IGBTs and BJTs
IR2101 IC DIP8 IR2101S SOP8 Driver
Features:
- Floating channel designed for bootstrap operation Fully operational to +600V Tolerant to negative transient voltage dV/dt immune
- Gate drive supply ranges from 10 to 20V
- Undervoltage lockout
- 3.3V, 5V, and 15V logic input compatible
- Matched propagation delay for both channels
- Outputs in phase with inputs (IR2101) or out of phase with inputs (IR2102
SKU: n/a -
MOSFETs, IGBTs and BJTs
IRF2807 MOSFET 75V
IRF2807 MOSFET Features- Planar cell structure for wide SOA
- Optimized for the broadest availability from distribution partners
- Product qualification according to JEDEC standard
- Silicon optimized for applications switching below <100kHz
- Industry-standard through-hole power package
- High-current carrying capability package (up to 195 A, die-size dependent)
- Capable of being wave-soldered
SKU: n/a -
MOSFETs, IGBTs and BJTs
IR2109 IC DIP8 IR2109S SOP8 Driver
Features- Floating channel designed for bootstrap operation
- Fully operational to +600 V
- Tolerant to negative transient voltage
- dV/dt immune
- Gate drive supply range from 10 to 20 V
- Undervoltage lockout for both channels
- 3.3 V, 5 V, and 15 V logic input compatible
- Cross-conduction prevention logic
- Matched propagation delay for both channels
- High side output in phase with IN input
- Logic and power ground + /- 5 V offset
- Internal 540ns dead-time
- Lower di/dt gate driver for better noise immunity
- Shut down input turns off both channels
SKU: n/a -
ICs and Optocouplers, MOSFETs, IGBTs and BJTs
A3150 IC HCPL3150 DIP8 SOP8 Driver
A3150 IC HCPL3150 Driver Features
- 0.5 A Minimum Peak Output
- Current
- 15 kV/µs Minimum Common
- Mode Rejection (CMR) at
- VCM = 1500 V
- 1.0 V Maximum Low Level
- Output Voltage (VOL)
- Eliminates Need for
- Negative Gate Drive
- ICC = 5 mA Maximum Supply
- Current
- Under Voltage Lock-Out
- Protection (UVLO) with
- Hysteresis
- Wide Operating VCC Range:
- 15 to 30 Volts
- 500 ns Maximum Switching
- Speeds
- Industrial Temperature
- Range: -40°C to 100°C
- Safety and Regulatory
- Approval: UL Recognized
- 2500 Vrms for 1 min. per
- UL1577
- VDE 0884 Approved with VIORM = 630 Vpeak (Option 060 only)
- CSA Approved
SKU: n/a -
MOSFETs, IGBTs and BJTs
IR2153 IC DIP8 MOSFET Driver
IR2153 IC Features- Integrated 600 V half-bridge gate driver
- 15.6 V zener clamp on VCC
- True micropower start-up
- Tighter initial deadtime control
- Low temperature coefficient deadtime
- Shutdown feature (1/6th Vcc) on CT pin
- Increased undervoltage lockout Hysteresis (1 V)
- Lower power level-shifting circuit
- Constant LO, HO pulse widths at startup
- Lower di/dt gate driver for better noise immunity
- Low side output in phase with RT
- Excellent latch immunity on all inputs and outputs
- ESd protection on all leads
SKU: n/a
