IR2136S IC SOP28 MOSFET Driver
- Floating channel designed for bootstrap operation
- Fully operational to +600 V
- Tolerant to negative transient voltage, dV/dt immune
- Gate drive supply ranges from 10 V to 20 V (IR2136/IR21368), 11.5 V to 20 V (IR21364), or 12 V to 20 V (IR21363/IR21365/IR21366)
- Under-voltage lockout for all channels
- Over-current shutdown turns off all six drivers
- Independent 3 half-bridge drivers
- Matched propagation delay for all channels
- Cross-conduction prevention logic
- Low side output out of phase with inputs, high side outputs out of phase. (IR2136/IR21363/IR21365/IR21366/IR21368)
- Low side and high side outputs in phase with inputs. (IR21364)
- 3.3 V logic compatible
- Lower di/dt gate drive for better noise immunity
- Externally programmable delay for automatic fault clear
- LEAD-FREE and RoHS Compliant
₨200
CompareThe IR2136S IC is a high voltage, high-speed power MOSFET and IGBT driver with three independent high and low side referenced output channels for 3-phase applications. Proprietary HVIC technology enables ruggedized monolithic construction. Logic inputs are compatible with CMOS or LSTTL outputs, down to 3.3V logic.
A current trip function which terminates all six outputs can be derived from an external current sense resistor. An enable function is available to terminate all six outputs simultaneously. An open-drain FAULT signal is provided to indicate that an overcurrent or undervoltage shutdown has occurred. Overcurrent fault conditions are cleared automatically after a delay programmed externally via an RC network connected to the RCIN input.
IR2136S IC in pakistan
Related products
-
MOSFETs, IGBTs and BJTs
HIP4082IPZ SMD HIP4082 MOSFET Driver
HIP4082IPZ SMD Specifications:
- Sim Model: No
- Max Bootstrap Supply Voltage (V): 95
- VBIAS (max) (V): 15.0
- Peak Pull-up Current: 1.4 A
- Peak Pull-down Current: 1.3 A
- Turn-On Prop Delay (ns): 75.0
- Turn-Off Prop Delay (ns): 55.0
- Rise Time: 9 ns
- Fall Time: 9 ns
- Input Logic Level: 3.3V/TTL
- Charge Pump: No
- Qualification Level: Standard
- Can Sample: Yes
- $/1K Units: 1.63
- Temperature Range: -55 to +125
SKU: HIP4082IPZ-IC -
MOSFETs, IGBTs and BJTs
IR2104 IC DIP8 IR2104S SOP8 Driver
Features and Specifications
- Floating channel designed for bootstrap operation
- Fully operational to +600V
- Tolerant to negative transient voltage
- dV/dt immune
- Gate drive supply ranges from 10 to 20V
- Undervoltage lockout
- 3.3V, 5V, and 15V input logic compatible
- Cross-conduction prevention logic
- Internally set deadtime
- High-side output in phase with the input
- Shut down input turns off both channels
- Matched propagation delay for both channels
SKU: n/a -
ICs and Optocouplers, MOSFETs, IGBTs and BJTs
TLP350 IC DIP8 TLP350S SOP8 Driver
Features:
- Peak output current : IO = ±2.5A (max)
- Guaranteed performance over temperature: -40 to 100°C
- Supply current: ICC = 2 mA (max)
- Power supply voltage: VCC = 15 to 30 V
- Threshold input current : IFLH = 5 mA (max)
- Switching time (tpLH/tpHL): 500 ns (max)
- Common mode transient immunity: 15 kV/μs
- Isolation voltage: 3750 Vrms
- UL Recognized : UL1577,File No.E67349
- Option(D4)
- VDE Approved: DIN EN 60747-5-2
- Maximum Operating Insulation Voltage: 890VPK
- Highest Permissible Over Voltage: 6000VPK
SKU: n/a -
ICs and Optocouplers, MOSFETs, IGBTs and BJTs
TLP352 IC DIP8 TLP352S SOP8 Driver
Features:
- Buffer logic type (totem pole output)
- Output peak current: ±2.5 A (max)
- Operating temperature: -40 to 125 C
- Supply current: 3.0 mA (max)
- Supply voltage: 15 to 30 V
- Threshold input current: 5 mA (max)
- Propagation delay time: 200 ns (max)
- Common-mode transient immunity: ±20 kV/µs (min)
- Isolation voltage: 3750 Vrms (min)
- Safety standards
- UL-approved: UL1577, File No.E67349
- cUL-approved: CSA Component Acceptance Service No.5A File No.E67349
- VDE-approved: EN60747-5-5
SKU: n/a -
MOSFETs, IGBTs and BJTs
IRF3710 MOSFET 100V
IRF3710 MOSFET Features- Planar cell structure for wide SOA
- Optimized for the broadest availability from distribution partners
- Product qualification according to JEDEC standard
- Silicon optimized for applications switching below <100kHz
- Industry-standard through-hole power package
- High-current carrying capability package (up to 195 A, die-size dependent)
- Capable of being wave-soldered
SKU: n/a
