-
×
SOP 8 Pin SMD Socket
1 × ₨340
Subtotal: ₨340
IC and IC Sockets
LM2901N DIP-14
LM2901N DIP-14 Features
- Improved specifications of B-version
- Maximum rating: up to 38 V
- ESD rating (HBM): 2k V
- Low input offset: 0.37 mV
- Low input bias current: 3.5 nA
- Low supply-current: 200 µA per comparator
- Faster response time of 1 µsec
- Extended temperature range for LM339B
- B-version is drop-in replacement for LM239, LM339 and LM2901, A and V versions
- Common-mode input voltage range includes ground
- Differential input voltage range equal to maximum-rated supply voltage: ±38 V
- The low output saturation voltage
- Output compatible with TTL, MOS, and CMOS
Compare
The LM339B and LM2901B devices are the next generation versions of the industry-standard LM339 and LM2901 comparator family. These next generation B-version comparators feature lower offset voltage, higher supply voltage capability, lower supply current, lower input bias current, lower propagation delay, and improved 2 kV ESD performance and input ruggedness through dedicated ESD clamps. The LM339B and LM2901B can drop-in replace the LM239, LM339 and LM2901, for both “A” and “V” grades.
Related products
-
IC and IC Sockets
ZIF Socket 48 Pin for Super Pro
ZIF Socket 48 Pin for Super Pro Specifications:
- Pin Count: 48 pins – Accommodates a wide range of ICs.
- ZIF Design: Zero Insertion Force mechanism for easy and secure handling of integrated circuits.
- Compatibility: Specifically designed for use with Super Pro programmers.
- Material: High-quality materials for durability and longevity.
- Connector Type: DIP (Dual In-line Package) for straightforward integration with programmable devices.
- Pitch: Standard 2.54mm pitch for compatibility with various IC packages.
- Locking Mechanism: Secure locking mechanism to ensure proper connection during programming.
- Operating Temperature Range: Suitable for a broad range of environmental conditions.
- Application: Ideal for programming microcontrollers, EEPROMs, and other programmable devices.
SKU: n/a -
IC and IC Sockets
STI3408B S10B Voltage Regulator
STI3408B S10B Voltage Regulator Specifications:
- High Efficiency: Up to 96%
- 1.5MHz Constant Frequency Operation
- 1.2A Output Current
- No Schottky Diode Required
- 2.5V to 6.0V Input Voltage Range
- Output Voltage as Low as 0.6V
- 100% Duty Cycle in Dropout
- Low Quiescent Current: 40µA
- Slope Compensated Current Mode Control for Excellent Line and Load Transient Response
- Short Circuit Protection
- Thermal Fault Protection
- Inrush Current Limit and Soft Start
- Input over-voltage protection(OVP)
- <1µ A Shutdown Current
- Tiny SOT23-5 Package
“>
SKU: n/a -
IC and IC Sockets
Socket 16-Pin
Socket 16 Pin Specifications:
- Pin Count: 16
- Package Compatibility: Designed to accommodate a variety of 16-pin IC packages, ensuring broad applicability.
- Mounting Style: Available in different configurations, including through-hole and surface mount options, to suit diverse PCB layouts.
- Material: High-quality materials chosen for durability, electrical conductivity, and resistance to environmental factors.
- Contact Material: Phosphor Bronze or Beryllium Copper, selected for optimal electrical performance and corrosion resistance.
- Contact Plating: Gold or Tin plating options to ensure a reliable and low-resistance electrical interface.
- Pitch: Standard pitch to accommodate 16-pin IC packages with precision.
- Socket Body: Robust design for mechanical strength and stability, ensuring a secure connection.
- Socket Insulation: Insulating material to prevent short circuits and ensure electrical isolation between pins.
- Operating Temperature Range: Wide temperature tolerance to meet the demands of various operating environments.
- Current Rating: Adequate current-carrying capacity to handle the specified 16-pin ICs safely.
- RoHS Compliance: Compliant with RoHS (Restriction of Hazardous Substances) directives for environmental safety.
- Package Dimensions: Precise dimensions to accommodate the specified 16-pin IC package size and configuration.
- Insertion and Extraction Force: Optimized for easy insertion and removal of 16-pin ICs while maintaining a secure connection.
- Durability: Designed for a high number of insertion and extraction cycles, ensuring long-term reliability.
- Application: Ideal for use in a wide range of electronic applications, including prototyping, testing, and development projects where frequent replacement or testing of 16-pin ICs is required.
- Compatibility: Compatible with various 16-pin ICs from different manufacturers, providing flexibility in design and component selection.
SKU: n/a -
IC and IC Sockets
5815M RDA5815M QFN-20 Signal IC
5815M IC RDA5815M QFN-20 Signal IC Specifications:
- Single-chip RF-to-baseband Satellite receiver
- CMOS Fully integrated RF front end
- Low noise and wide dynamic range zero-IF receiver
- Input frequency range: 250 to 2300 MHz
- Input signal level: -100 to 5 dBm
- More than 85dB gain control range
- Fully integrated PLL (dividers, charge pump, phase & frequency detectors, loop filters, etc.)
- Integrated RX VCO
- Integrated baseband LPF with selectable cut-off Applications frequency from 4MHz to 40MHz with 1MHz step
- Integrated LNA with RF AGC Integrated reference oscillator (27MHz is the default)
- I2C bus interface
- Automatic gain control
- 0.11μm RF CMOS technology
- 3V to 3.6V operation
- power consumption less than 600mW
- Lower profile packages:
- RDA5815M 5×5 mm QFN32 Pin assignment (32 pin QFN 5×5 mm)
- Set-top boxes
- Digital video recorders
- Digital television
- Satellite PC-TV
SKU: n/a -
IC and IC Sockets
Socket 40-Pin
Socket 40 Pin Specifications:
- Pin Count: 40
- Package Compatibility: Designed to accommodate a wide range of 40-pin IC packages, including DIP (Dual Inline Package) and other standard configurations.
- Mounting Style: Suitable for both through-hole mounting for secure PCB attachment.
- Material: High-quality materials selected for durability and resistance to environmental factors.
- Contact Material: Phosphor Bronze or Beryllium Copper, providing excellent electrical conductivity and corrosion resistance.
- Contact Plating: Gold or Tin plating options available to ensure a reliable and low-resistance connection.
- Pitch: Standardized pitch to accommodate 40-pin IC packages with precision.
- Socket Body: Sturdy socket body design to provide mechanical strength and stability during insertion and removal of ICs.
- Socket Insulation: Insulating material prevents short circuits and ensures electrical isolation between pins.
- Operating Temperature Range: Wide temperature range to meet various application requirements.
- Current Rating: Adequate current-carrying capacity to handle the specified 40-pin ICs.
- RoHS Compliance: Compliant with RoHS directives for environmental safety.
- Package Dimensions: Precise dimensions to accommodate the specified 40-pin IC package size and configuration.
- Insertion and Extraction Force: Optimized for easy insertion and removal of 40-pin ICs while maintaining a secure connection.
- Durability: Designed for a high number of insertion and extraction cycles to ensure long-term reliability.
- Application: Ideal for use in prototyping, testing, and development environments where frequent replacement or testing of 40-pin ICs is required.
- Compatibility: Compatible with a variety of 40-pin ICs from different manufacturers, offering versatility in electronic designs.
SKU: n/a
