Modules and Motors
TSOP1738 IR Receiver Module
TSOP1738 IR Receiver Module Features
- Photo Detector, IR Filter, Preamplifier and PCM frequency filter in one package
- Shielding against EMI or RFI interference
- CMOS and TTL Compatible
- Active Low Output
- Immunity against ambient light
- Low Power Consumption
- Able to transfer data continuously up to 2400bps
- Supply Voltage : 4.5 – 5.5V
₨280
CompareTSOP1738 IR receiver for Infrared PCM remote control systems. It is used in TVs, DVD Players, Burglar Alarms etc. This component is built with a PIN Diode, Preamplifier and internal filter for PCM (Pulse Code Modulation) frequency and its epoxy package is designed as an IR filter.
These are available with different carrier frequencies out of which TSOP1738 is very common whose carrier frequency is 38KHz. The output of TSOP17XX receivers can be directly connected to a microcontroller or microprocessor for further processing.
Based on 0 reviews
Be the first to review “TSOP1738 IR Receiver Module”
You must be logged in to post a review.
Related products
-
Modules and Motors
ESP-01 ESP8266 WiFi Module
ESP 01 WiFi Module ESP8266 Features
- 802.11 b/g/n protocol
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, and power management units
- +19.5dBm output power in 802.11b mode
- Integrated temperature sensor
- Supports antenna diversity
- Power down leakage current of < 10uA
- Integrated low power 32-bit CPU could be used as application processor
- SDIO 2.0, SPI, UART
- STBC, 1×1 MIMO, 2×1 MIMO
- A-MPDU & A-MSDU aggregation & 0.4s guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
SKU: ESP-01-ESP8266-WiFi-Module -
-
-
Modules and Motors
ACS712 Arduino Current Sensor
ACS712 Arduino Current Sensor Voltage Output
- 1/2 VCC when no load or it is 2.5V since we use 5V as VCC.
- 5A type generate 185mV every amp current
- 20A type generate 100mV every amp current
- 30A type generate 66mV every amp current
SKU: acs712-current-sensor -
Modules and Motors
MG946R Servo Motor
MG946R Servo Motor Features:
- Power: 4.8V – 6V DC max (5V works well)
- Average Speed: 60 degrees in 0.20 sec (@ 4.8V), 60 degrees in 0.16 sec (@ 6.0V)
- Weight: 62.41g
- Torque: At 4.8V: 8.5 kg-cm / 120 oz-in, and at 6V: 10 kg-cm / 140 oz-in.
- Size mm: (L x W x H) 40.7 x 19.7 x 42.9
SKU: n/a
There are no reviews yet.