IC and IC Sockets
LM2903 SOP-8
LM2903 SOP-8 Features:
- Improved specifications
- Maximum rating: up to 38 V
- ESD rating (HBM): 2k V
- Low input offset: 0.37 mV
- Low input bias current: 3.5 nA
- Low supply-current: 200 µA per comparator
- Faster response time of 1 µsec
- Extended temperature range for LM393B
- Available in tiny 2 x 2mm WSON package
- B-version is drop-in replacement for LM293, LM393 and LM2903, A and V versions
- Common-mode input voltage range includes ground
- Differential input voltage range equal to maximum-rated supply voltage: ±38 V
- The low output saturation voltage
- Output compatible with TTL, MOS, and CMOS
Compare
LM2903 SOP-8 is the next-generation version of the industry-standard LM393 and LM2903 comparator family. These next-generation B-version comparators feature lower offset voltage, higher supply voltage capability, lower supply current, lower input bias current, lower propagation delay, and improved 2 kV ESD performance and input ruggedness through dedicated ESD clamps. The LM393B and LM2903B can drop-in replace the LM293, LM393 and LM2903, for both “A” and “V” grades.
All devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Quiescent current is independent of the supply voltage.
Related products
-
IC and IC Sockets
SOP 28-Pin SMD Socket
SOP 28 Pin SMD Socket Specifications:
- Package Type: SOP (Small Outline Package)
- Pin Count: 28
- Mounting Style: Surface Mount Device (SMD)
- Material: High-grade materials with excellent heat resistance for enhanced durability in diverse operating conditions.
- Contact Material: Phosphor Bronze or Beryllium Copper for superior conductivity and resistance to corrosion.
- Contact Plating: Gold or Tin plating options to ensure a secure, low-resistance connection.
- Pitch: Standard pitch to accommodate SOP packages with precision.
- Socket Body: Sturdy socket body design for mechanical strength and stability on the PCB.
- Socket Insulation: Insulating material to prevent short circuits and ensure electrical isolation.
- Operating Temperature Range: Wide temperature range suitability to meet the demands of various application environments.
- Current Rating: Adequate current-carrying capacity to handle the specified SOP 28-pin ICs.
- RoHS Compliance: Compliant with RoHS (Restriction of Hazardous Substances) directives for environmental safety.
- Package Dimensions: Precise dimensions to securely house SOP 28-pin ICs with the correct size and configuration.
- Insertion and Extraction Force: Optimized for smooth insertion and removal of SOP ICs, maintaining a secure connection.
- Durability: Engineered for a high number of insertion and extraction cycles to ensure long-term reliability.
- Application: Well-suited for use in development, testing, and prototyping scenarios where frequent replacement or testing of SOP 28-pin ICs is necessary.
SKU: n/a -
IC and IC Sockets
Round Socket 8-Pin
Round Socket 8 Pin Specifications:
- Socket Type: Round Socket
- Pin Count: 8
- Package Compatibility: Designed to accommodate 8-pin round-shaped ICs.
- Mounting Style: Suitable for surface mounting on PCBs.
- Material: High-quality materials with heat-resistant properties for enhanced durability.
- Contact Material: Phosphor Bronze or Beryllium Copper, ensuring excellent conductivity and corrosion resistance.
- Contact Plating: Gold or Tin plating options for a reliable and low-resistance connection.
- Pitch: Standard pitch to match the specifications of 8-pin round IC packages.
- Socket Body: Robust design for mechanical strength and stability.
- Socket Insulation: Insulating material to prevent short circuits and ensure electrical isolation.
- Operating Temperature Range: Wide temperature range compatibility for diverse application environments.
- Current Rating: Adequate current-carrying capacity to handle the specified 8-pin round ICs.
- RoHS Compliance: Compliant with RoHS directives for environmental safety.
- Package Dimensions: Precise dimensions to accommodate the specified 8-pin round IC package size and configuration.
- Insertion and Extraction Force: Optimized for easy insertion and removal of 8-pin round ICs while maintaining a secure connection.
- Durability: Engineered for a high number of insertion and extraction cycles to ensure long-term reliability.
- Application: Well-suited for prototyping, testing, and development environments where easy replacement or testing of 8-pin round ICs is required.
- Compatibility: Designed to be compatible with a variety of 8-pin round ICs from different manufacturers.
- Easy for IC Removal and Insertion
- RoHS Compliant
- pins: 8 pins
SKU: n/a -
IC and IC Sockets
5815M RDA5815M QFN-20 Signal IC
5815M IC RDA5815M QFN-20 Signal IC Specifications:
- Single-chip RF-to-baseband Satellite receiver
- CMOS Fully integrated RF front end
- Low noise and wide dynamic range zero-IF receiver
- Input frequency range: 250 to 2300 MHz
- Input signal level: -100 to 5 dBm
- More than 85dB gain control range
- Fully integrated PLL (dividers, charge pump, phase & frequency detectors, loop filters, etc.)
- Integrated RX VCO
- Integrated baseband LPF with selectable cut-off Applications frequency from 4MHz to 40MHz with 1MHz step
- Integrated LNA with RF AGC Integrated reference oscillator (27MHz is the default)
- I2C bus interface
- Automatic gain control
- 0.11μm RF CMOS technology
- 3V to 3.6V operation
- power consumption less than 600mW
- Lower profile packages:
- RDA5815M 5×5 mm QFN32 Pin assignment (32 pin QFN 5×5 mm)
- Set-top boxes
- Digital video recorders
- Digital television
- Satellite PC-TV
SKU: n/a -
IC and IC Sockets
ZIF Socket 40 Pin
Specifications:
- Pin Count: 40 pins – Accommodates a variety of integrated circuits.
- ZIF Design: Zero Insertion Force mechanism for effortless and safe IC handling.
- Pitch: Standard 2.54mm pitch – Compatible with various IC packages.
- Material: High-quality materials ensure durability and reliability.
- Connector Type: DIP (Dual In-line Package) – Easily integrates with programmable devices.
- Locking Mechanism: Secure locking mechanism ensures stable connections during IC programming.
- Operating Temperature Range: Suitable for a wide range of environmental conditions.
- Application: Ideal for programming microcontrollers, EEPROMs, and other programmable devices.
- Compatibility: Suitable for use in various electronic projects and applications requiring IC programming.
SKU: n/a -
IC and IC Sockets
Socket 40-Pin
Socket 40 Pin Specifications:
- Pin Count: 40
- Package Compatibility: Designed to accommodate a wide range of 40-pin IC packages, including DIP (Dual Inline Package) and other standard configurations.
- Mounting Style: Suitable for both through-hole mounting for secure PCB attachment.
- Material: High-quality materials selected for durability and resistance to environmental factors.
- Contact Material: Phosphor Bronze or Beryllium Copper, providing excellent electrical conductivity and corrosion resistance.
- Contact Plating: Gold or Tin plating options available to ensure a reliable and low-resistance connection.
- Pitch: Standardized pitch to accommodate 40-pin IC packages with precision.
- Socket Body: Sturdy socket body design to provide mechanical strength and stability during insertion and removal of ICs.
- Socket Insulation: Insulating material prevents short circuits and ensures electrical isolation between pins.
- Operating Temperature Range: Wide temperature range to meet various application requirements.
- Current Rating: Adequate current-carrying capacity to handle the specified 40-pin ICs.
- RoHS Compliance: Compliant with RoHS directives for environmental safety.
- Package Dimensions: Precise dimensions to accommodate the specified 40-pin IC package size and configuration.
- Insertion and Extraction Force: Optimized for easy insertion and removal of 40-pin ICs while maintaining a secure connection.
- Durability: Designed for a high number of insertion and extraction cycles to ensure long-term reliability.
- Application: Ideal for use in prototyping, testing, and development environments where frequent replacement or testing of 40-pin ICs is required.
- Compatibility: Compatible with a variety of 40-pin ICs from different manufacturers, offering versatility in electronic designs.
SKU: n/a
