Analog and Digital Converters
MAX488 IC
MAX488 IC Key Features
- Low Power Consumption Minimizes Thermal Dissipation, Reducing System Cost
- 120µA to 500µA Quiescent Current
- Shutdown Current of 0.1µA
- Single 5V Supply Voltage
- Slew-Rate-Limited Drivers (MAX483/MAX487/MAX488 and MAX489)
- Up to 250kbps Data Rate
- Unlimited Drivers: Up to 2.5Mbps Data Rate
- Integrated Protection Enhances System Robustness
- Short Circuit Current Limited Driver
- Integrated Thermal Shutdown
- Receiver Fail-Safe for Input Open Circuit
- Guarantees Logic High
- 1/4 Unit Loading (MAX487/ MAX1487 only) Allows Up to 128 Devices on a Single Bus
- 48kΩ Receiver Input Resistance
₨70
CompareThe MAX488 IC is a low-power transceiver for RS-485 and RS-422 communication. Each part contains one driver and one receiver. The MAX483, MAX487, MAX488, and MAX489 feature reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, thus allowing error-free data transmission up to 250kbps. The driver slew rates of the MAX481, MAX485, MAX490, MAX491, and MAX1487 are not limited, allowing them to transmit up to 2.5Mbps.
Best Price in Pakistan Available at Embeded Studio. Delivery Available across Pakistan. Order Now. Buy Today.
Based on 0 reviews
Be the first to review “MAX488 IC”
You must be logged in to post a review.
Related products
-
Analog and Digital Converters
MCP2551 High-speed CAN Transceiver
Features
- Slope control input
- Supports 1 Mb/s operation
- Implements ISO-11898 standard physical layer requirements
- Suitable for 12V and 24V systems
- Externally-controlled slope for reduced RFI emissions
- Permanent dominant detect
- Low current standby operation
- High noise immunity due to differential bus implementation
SKU: n/a -
Analog and Digital Converters
ADC0832 Converter 8-Bit Analog to Digital
ADC0832 Converter 8-Bit Analog to Digital Features
- NSC MICROWIRE compatible — direct interface to COPS family processors
- Easy interface to all microprocessors, or operates “stand-alone”
- Operates ratiometrically or with 5 VDC voltage reference
- No zero or full-scale adjust required n 2-, 4- or 8-channel multiplexer options with address logic
- Shunt regulator allows operation with high voltage supplies
- 0V to 5V input range with single 5V power supply
- Remote operation with serial digital data link
- TTL/MOS input/output compatible
- 0.3″ standard width, 8-, 14- or 20-pin DIP package
- 20 Pin Molded Chip Carrier Package (ADC0838 only)
- Surface-Mount Package
SKU: n/a -
Analog and Digital Converters
DC 4.5-40V To 5V 2A USB Charger DC-DC Step-down Buck Converter Voltmeter Module
Analog and Digital ConvertersDC 4.5-40V To 5V 2A USB Charger DC-DC Step-down Buck Converter Voltmeter Module
DC 4.5-40V USB Charger Converter Voltmeter Module Specifications:
- Input Voltage Range: 4.5V – 40V
- Output Voltage: 5V
- Output Current: Up to 2A
- Conversion Efficiency: >90%
- Display Accuracy: ±0.1V
- Operating Temperature: -40°C to +85°C
- Dimensions: (L x W x H) 60mm x 21mm x 14mm
- Weight: 15g
- Protection: Overcurrent, Overvoltage, Short Circuit
- Connector Type: Screw terminals for input and output
- Display Type: LED Voltmeter
SKU: n/a -
Analog and Digital Converters
DAC0832 Converter 8-Bit Analog to Digital
DAC0832 Converter 8-Bit Analog to Digital Features
- Double-buffered, Single-Buffered or Flow-Through Digital Data Inputs
- Easy Interchange and Pin-Compatible with 12-bit DAC1230 Series
- Direct Interface to All Popular Microprocessors
- Linearity Specified with Zero and Full Scale Adjust Only—NOT BEST STRAIGHT LINE FIT.
- Works with ±10V Reference-Full 4-Quadrant Multiplication
- Can Be Used in the Voltage Switching Mode
- Logic Inputs Which Meet TTL Voltage Level Specs (1.4V Logic Threshold)
- Operates “STAND ALONE” (without μP) if Desired
- Available in 20-pin SOIC or PLCC Package
SKU: n/a -
Analog and Digital Converters, Tools & Instruments
USB Current Voltage Detector 3V-9V Tester Double USB Row Shows
Analog and Digital Converters, Tools & InstrumentsUSB Current Voltage Detector 3V-9V Tester Double USB Row Shows
USB Detector Current Voltage Specifications:
- Voltage Range: 3V – 9V
- Current Range: Varies based on the specific model (e.g., 0-3A)
- Display: Dual-row LED display for simultaneous monitoring of two USB ports
- Dimensions: Compact and pocket-sized for portability
- Compatibility: Works with a wide range of USB devices, including smartphones, tablets, power banks, and more
- Operating Temperature: Suitable for use in a variety of environments
- Power Source: Draws minimal power from the connected USB ports for self-operation
- Materials: Durable and lightweight materials for long-lasting use
SKU: n/a
There are no reviews yet.