NEO 6M V2 GPS Module U BLOX
76 in stock (can be backordered)
NEO 6M V2 GPS Module U BLOX Features
- U Blox NEO 6M GPS module with antenna and build-in EEPROM
- This module is compatible with APM2 and APM2.5
- and EEPROM can save all your configuration data.
- The battery Model is MS621FE Need to welding
- Battery not included.
- Interface: RS232 TTL
- Power: 3-5V
- Baudrate default:9600bps
₨1,000
76 in stock (can be backordered)
CompareNEO 6M V2 GPS Module U BLOX engine on these modules is quite a good one, and it also has high sensitivity for indoor applications. Furthermore, there’s one MS621FE-compatible rechargeable battery for backup and EEPROM for storing configuration settings.
The module works well with a DC input in the 3.3- to 5-V range (thanks to its built-in voltage regulator). The original circuit diagram of the module, borrowed from the web, is shown below:
As indicated, the GPS modules are based on the u-blox NEO-6M GPS engine. The type number of the NEO-6M is NEO-6M-0-001, and its ROM/FLASH version is ROM 7.0.3 (PCN reference UBX-TN-11047-1).
The NEO-6M module has one configurable UART interface for serial communication, but it defaults to a baud rate of 9,600.
Because the GPS signal is right-hand circular-polarized (RHCP), the style of the GPS antenna will be different from the common whip antennas used for linear polarized signals. The most popular antenna type is the patch antenna.
NEO 6M V2 GPS Module price in pakistan
Based on 0 reviews
Be the first to review “NEO 6M V2 GPS Module U BLOX”
You must be logged in to post a review.
Related products
-
Modules and Motors
L298N Motor Driver H-Bridge
Features & Specifications
- Driver Model: L298N 2A
- Driver Chip: Double H Bridge L298N
- Motor Supply Voltage (Maximum): 46V
- Motor Supply Current (Maximum): 2A
- Logic Voltage: 5V
- Driver Voltage: 5-35V
- Driver Current:2A
- Logical Current:0-36mA
- Maximum Power (W): 25W
- Current Sense for each motor
- Heatsink for better performance
- Power-On LED indicator
SKU: n/a -
Modules and Motors
A3144EUA Sensor
A3144EUA Sensor FEATURES and BENEFITS
- Superior Temp. Stability for Automotive or Industrial Applications
- 4.5 V to 24 V Operation … Needs Only An Unregulated Supply
- Open-Collector 25 mA Output … Compatible with Digital Logic
- Reverse Battery Protection
- Activate with Small, Commercially Available Permanent Magnets
- Solid-State Reliability
- Small Size
- Resistant to Physical Stress
SKU: n/a -
-
Modules and Motors
RFID Card 125KHz
RFID Card 125KHz Specifications:
- Frequency: 125KHz
- Material: PVC or PET, ensuring durability
- Dimensions: Standard credit card size (85.6 x 54 mm)
- Operating Temperature: -20°C to +50°C (-4°F to +122°F)
- Read Range: Dependent on the RFID reader used, typically ranges from a few centimetres to several meters
- Data Storage: Typically has a fixed unique identifier (UID) programmed during manufacturing
- Printable Area: Standard ISO CR80 printing area (84.6 x 53.98 mm)
- Compatibility: Compatible with 125KHz RFID readers adhering to industry standards
“>
SKU: n/a -
Modules and Motors
ACS712 Arduino Current Sensor
ACS712 Arduino Current Sensor Voltage Output
- 1/2 VCC when no load or it is 2.5V since we use 5V as VCC.
- 5A type generate 185mV every amp current
- 20A type generate 100mV every amp current
- 30A type generate 66mV every amp current
SKU: acs712-current-sensor
There are no reviews yet.