OV7670 Camera Module for Arduino
OV7670 Camera Module for Arduino Specifications:
-
- Image Sensor: Omnivision OV7670
- Resolution: VGA (640×480 pixels)
- Frame Rate: Adjustable, up to 30 frames per second
- Interface: I2C
- Supply Voltage: 3.3V (Typical), 5V-tolerant I/O
- Operating Temperature: -30°C to 70°C
- Dimensions: Compact form factor for easy integration into various projects
- Lens Compatibility: Standard M12 lens mount for flexibility in lens selection
- Signal Processing: Onboard signal processing for reduced microcontroller workload
- Compatibility: Designed for use with Arduino microcontrollers
₨450
CompareThe OV7670 Camera Module for Arduino is a compact and versatile imaging solution designed for embedded systems and DIY electronics projects. This camera module is equipped with the Omnivision OV7670 image sensor, delivering high-quality still images and video capture capabilities. With its small form factor and easy integration with Arduino microcontrollers, this camera module opens up a world of possibilities for hobbyists, tinkerers, and developers looking to add vision capabilities to their projects.
Based on 0 reviews
Be the first to review “OV7670 Camera Module for Arduino”
You must be logged in to post a review.
Related products
-
Sensors, Arduino, Modules and Motors
DC Voltage Sensor Module for Arduino 0-25V
DC Voltage Sensor Module Arduino Specifications:
- Voltage Range: 0 to 25V DC
- Input Voltage: 5V DC (supplied by Arduino)
- Output Type: Analog Voltage
- Accuracy: ±1%
- Operating Temperature: -10°C to +70°C
- LED Indicator: Yes
- Reverse Polarity Protection: Yes
- Dimensions: (L x W x H) 2.5 cm x 1.5 cm x 0.8 cm
- Weight: 5 grams
- Interface: 3-pin header for easy connection to Arduino
SKU: n/a -
Sensors, Arduino
10KG Scale Load Cell Weighing Sensor +HX711 Weighing Sensors AD Module
10KG Scale Load Cell Weighing Sensor +HX711 Weighing Sensors AD Module Specifications:
- Material: Mixture
- Model Number: Load Cell
- Usage: Pressure Sensor
- Type: Acceleration Sensor
- Technical Parameters
- Range: 1一10kg
- Output sensitivity: 1.0±0.1mV/V
- Zero output: ±0.1mV/V
- Nonlinear: 0.05% F.S
- Lag: 0.05% F.S
- Repeatability: 0.05% F.S
- Creep: 0.05% F.S/3min
- Output impedance: 1000±5% ohms
- Zero temperature drift: 0.05% F.S/10°C
- Temperature sensitivity drift: 0.05% F.S/10°C
- Unit Type: piece
- Package Weight:0.035kg (0.08lb.)
- Package Size:10cm x 10cm x 2cm (3.94in x 3.94in x 0.79in)
SKU: n/a -
Modules and Motors, Arduino
W5100 Ethernet Network Module Mini For Arduino
W5100 Ethernet Network Module Specifications:
- Controller: Wiznet W5100
- Interface: SPI (Serial Peripheral Interface)
- Ethernet Speeds: 10Base-T and 100Base-TX
- MicroSD Card Slot: Yes
- Power Supply: 3.3V (via Arduino) or external power source
- Power Consumption: Low power consumption for energy-efficient operation
- Dimensions: Compact form factor for space-efficient integration
- Status LEDs: Power, Link, Full Duplex, and Speed
- Operating Temperature: -40°C to 85°C
SKU: n/a -
Arduino, Modules and Motors
ZMCT103C 5A AC Current Transformer Module
ZMCT103C 5A AC Current Transformer Module Specifications:
- On-board precision micro-current transformer
- On-board high-precision op-amp circuit, to do accurate sampling and appropriate compensation and other functions to signal
- The module can measure AC within 5A, corresponding output analog can be adjusted
- Under ideal conditions, the input voltage VCC is 3-35V, according to the potentiometer (adjust the amplification ratio, amplification range 0-100 times) to adjust the required output voltage, but the output (OUT) of the maximum voltage does not exceed 1 / 2 VCC.
- The output signal is the AC voltage signal, and the output signal voltage does not exceed the maximum 1 / 2VCC.
- PCB board size: 38 (mm) x 18.5 (mm)
SKU: n/a
There are no reviews yet.