TB6560 3A Single-Axis CNC Router Stepper Motor Driver Board
Specification:
- Size: 75 x 50 x 35mm / 2.95 x 1.96 x 1.37inch (L x W x H)
- Rated maximum output: ± 3A, peak 3.5A
- Working voltage: DC 10V-35V
- Recommended to use a switching power supply: DC24V power supply is used in it.
- Subdivision: whole step, half-step, step 1/8, 1/16 step, a maximum of 16 Subdivisions.
>
₨1,400
CompareTb6560 3A Single-Axis CNC Router Stepper Motor Driver Board is based on TB6560 AHQ chip. It will significantly increase torque and ease of configuration of larger motors. Cheap and a great driver for CNC or 3D printers. On the RAMPS/GRBL shield, there are 2, eight-pin connectors for where the A4988 motor drivers are meant to connect.
Features:
- Â The current level is adjustable to meet your various application needs.
- Â The Automatic half-decay is adjustable.
- Â 6N137 high-speed optical coupling, to ensure a high speed not step out.
- Â Thick tooth radiators have good heat dissipation.
Tb6560 stepper motor driver price in pakistan
<script src="moz-extension://f26db0f4-f100-4dfb-9692-7da94f91d630/js/app.js” type=”text/javascript”></script>
<script src=”moz-extension://f26db0f4-f100-4dfb-9692-7da94f91d630/js/app.js” type=”text/javascript”>
Based on 0 reviews
Be the first to review “TB6560 3A Single-Axis CNC Router Stepper Motor Driver Board”
You must be logged in to post a review.
Related products
-
Breakout Boards
SYB-170 Mini Breadboard
SYB 170 Mini Breadboard Specifications:
- Type: SYB170
- Hole diameter: 1 mm / 0.04 inches
- Hole-pitch: 2.54 mm / 0.1 inches
- Thickness: 10mm
- Voltage: 300v
- low current: <5A
- Compatible with Raspberry Pi and ArduinoÂ
- Compatible with Raspberry Pi (RPI) and Arduino, LED, screw terminal, DuPont wire, connector, capacitor, resistor, IC, DIP, sensors, transistor and other electric power components or devices
SKU: mini-breadboard -
Breakout Boards
MB102 Breadboard
MB102 Breadboard Specifications:
- Breadboard power supply module, with 5 V, 3.3 V output voltages
- Apply to MB102 Standard breadboard
- Input voltage: 6.5-12 V (DC) or 5V USB power supply
- Output voltage: 3.3V and 5V can switch over
- Maximum output current: <700 ma
- Input voltage ON/OFF switch
SKU: mb102-breadboard -
Modules and Motors
L297 & L298 Stepper Motor Driver
L297 L298 Stepper Motor Driver Features
- Easily adjustable motor current (0 to 2A)
- Full and Half stepping modes
- Step, Direction and Enable inputs (5V logic level)
- Synchroniseable when using multiple drivers
- Enable input can be connected to ground to disable the motor
SKU: n/a -
Breakout Boards, Arduino
CJMCU-9548 TCA9548A 1-8 I2C Development Board For Arduino
CJMCU-9548 TCA9548A Development Board For Arduino Specifications:
- I2C Multiplexer: TCA9548A
- Number of Channels: 8
- I2C Compatibility: 3.3V and 5V
- Voltage Supply: 2.7V to 5.5V
- Address Configuration: On-board jumpers
- LED Indicators: Yes, one per channel
- Terminal Blocks: Screw terminals for easy connection
- Dimensions: (L x W x H) 50mm x 30mm x 10mm
- Mounting Holes: Yes, standard Arduino spacing
- Operating Temperature: -40°C to 85°C
- Compatibility: Arduino Uno, Arduino Mega, and other Arduino-compatible boards
SKU: n/a -
Breakout Boards
Mach3 CNC Breakout Board
Functions and Features
- High performance, cost-effective
- Maximum support 5-axis stepper motor driver controllers
- Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC softwarey
- USB power supply and peripherals powered phase are separated to protect computer security
- All the signals are opto-isolated which can protect your computer security.
- 5-input interface to define the Limit, Emergence-Stop, Cutter alignment etc.
- Wide input voltage range: 12-24V, and with anti-reverse function.
- One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc
- Compatible with all the 2 phase microstep drivers in the market
- Output 0-10V analog voltage for invert er to control the spindle speed
SKU: n/a
There are no reviews yet.