U18 Hall Effect Sensor
U18 Hall Effect Sensor Features:
- Wide supply voltage range 20V
- Wide temperature operation range -20~+125
- Alternating magnetic field operation
- TTL and MOS IC are directly drivable by the output
- The life is semi-permanent because it employs contactless parts
- SIP-3 package
- Pb-free plating product number: U18L
₨35
CompareU18 Hall Effect Sensor is a semiconductor integrated circuit utilizing the Hall effect. It has been so designed to operate in the alternating magnetic field, especially at low supply voltage and operation over extended temperature ranges to +125. This Hall IC is suitable for application to various kinds of sensors, contact less switches, and the like.
U18 Hall Effect Sensor is a semiconductor integrated circuit utilizing the Hall effect. It has been so designed to operate in the alternating magnetic field, especially at low supply voltage and operation over extended temperature ranges to +125. This Hall IC is suitable for application to various kinds of sensors, contact less switches, and the like.
Related products
-
Sensors
DS18B20 Temperature Sensor
DS18B20 Temperature Sensor Key Features
- Unique 1-Wire® Interface Requires Only One Port Pin for Communication
- Reduce Component Count with Integrated Temperature Sensor and EEPROM
- Measures Temperatures from -55°C to +125°C (-67°F to +257°F)
- ±0.5°C Accuracy from -10°C to +85°C
- Programmable Resolution from 9 Bits to 12 Bits
- No External Components Required
- Parasitic Power Mode Requires Only 2 Pins for Operation (DQ and GND)
- Simplifies Distributed Temperature-Sensing Applications with Multidrop Capability
- Each Device Has a Unique 64-bit Serial Code Stored in an On-Board ROM
- Flexible User-Definable Nonvolatile (NV) Alarm Settings with Alarm Search Command Identifies Devices with Temperatures Outside Programmed Limits
- Available in 8-Pin SO (150 mils), 8-Pin µSOP, and 3-Pin TO-92 Packages
SKU: n/a -
Sensors
MQ-135 Air Quality Gas Sensor
Specifications of MQ135 Gas Sensor:
- Wide detecting scope
- Fast response and High sensitivity
- Stable and long life Simple drive circuit
- Used in air quality control equipment for buildings/offices, is suitable for detecting
of NH3, NOx, alcohol, Benzene, smoke, CO2, etc. - Size: 35mm x 22mm x 23mm (length x width x height)
- Working voltage: DC 5 V
- Signal output instruction.
- Dual signal output (analog output, and high/low digital output)
- 0 ~ 4.2V analog output voltage, the higher the concentration the higher the voltage.
SKU: n/a -
Sensors
DS18B20 Sensor Digital Temperature Sensor
DS18B20 Sensor Specifications
- Programmable Digital Temperature Sensor
- Communicates using 1-Wire method
- Operating voltage: 3V to 5V
- Temperature Range: -55°C to +125°C
- Accuracy: ±0.5°C
- Output Resolution: 9-bit to 12-bit (programmable)
- Unique 64-bit address enables multiplexing
- Conversion time: 750ms at 12-bit
- Programmable alarm options
- Available as To-92, SOP and even as a waterproof sensor
SKU: n/a -
Sensors
LM35 Waterproof Temperature Sensor
LM35 Waterproof Temperature Sensor Specifications:
- Directly Celsius temperature calibration;
- Linear :+ 10.0mV / ℃;
- Ensure the accuracy : 0.5 ℃ (at + 25 ℃ when);
- Temperature range : 0 ℃ ~ 100 ℃
- Direct output voltage signal;
- Internally precision fine-tuning;
- Wide supply voltage:4 ~ 30V;
- Operating current: Less than 60μA;
- Low self-heating, in still air 0.1 ℃;
- Only non-linear value ± 1/4 ℃ of;
- Low-impedance output, 0.1Ω at 1mA load
SKU: n/a
