XBEE Arduino Shield
XBEE Arduino Shield Features:
- Mounts directly onto your Arduino
- DIN and DOUT pins of XBee can be connected to either the UART pins or any digital pin on the Arduino (D2 and D3 default)
- 3.3V power regulation and MOSFET level shifting on-board
- 9×11 grid of 0.1″ spaced prototyping holes
- The reset button brought out to shield
- Power, DIN, DOUT, RSSI and DIO5 indicator LEDs
₨700
CompareXBee Shield is an awesome way to add wireless capability to your Arduino project and now it’s even easier with the SparkFun XBee Shield. The shield form factor mates directly with any dev board that has an Arduino standard footprint and equips it with wireless communication capabilities using the popular XBee module. This unit works with all XBee modules including the Series 1 and 2, standard and Pro versions.
Power is taken from the 5V pin of the Arduino and regulated onboard to 3.3VDC before being supplied to the XBee. The shield also takes care of level shifting on the DIN and DOUT pins of the XBee. In the latest revision, the diode level shifter is replaced with a more robust MOSFET level shifter.
XBEE Arduino Shield price in pakistan
Based on 0 reviews
Be the first to review “XBEE Arduino Shield”
You must be logged in to post a review.
Related products
-
Zigbee Boards
ZigBee Dongle
ZigBee Dongle Features & Specifications
- Texas Instrument CC2530 SoC
- USB 2.0
- FTDI Virtual COM Port
- ZigBee Profile: Home Automation 1.2
- OTA Programming
- LED Indicator
- Frequencies: 2.4GHz
- Output Power: 17 dBm
- RX Sensitivity: -101 dBm
- Data Rate: 250 kbit/s
- Range: 200 meters (outdoor)
- Operating Humidity: up to 90% non-condensing
- Operating Temperature: -10° to 50°C
- Dimension: 89 x 27.8 x 12.7 mm
SKU: zigbee-dongle -
Zigbee Boards
XBEE Breakout Board Zigbee
XBEE Breakout Board Zigbee Features
- Industry’s fastest path to embedded cellular connectivity
- Smallest end-device certified embedded cellular modem on the market
- Pre-certified, Verizon end-device certified, and pre-provisioned on the cellular network</li></li>
- Authentic 20-pin XBee Through-Hole form factor
- Standard XBee AT and API interfaces
- 3.3 V power for battery-powered applications
- OTA firmware updates
- SSL/TLS for secure communications
- Configure locally with XCTU or remotely with Digi Remote Manager
SKU: n/a -
Zigbee Boards
XBEE Module Zigbee (S1/S2)
XBEE Module Features & Specifications:
- Indoor Range up to 100 ft. (30 m) &Â Outdoor RF line-of-sight Range up to 300 ft. (100 m)
- Interface: Serial(UART) at 1200-115200 bps
- Supply Voltage: 2.8 – 3.4 V
- Transmit Current (typical) 45mA (@ 3.3 V)
- Idle / Receive Current (typical) 50mA (@ 3.3 V)
- Operating Frequency:Â ISM 2.4 GHz
- Antenna: Whip antenna
- Supported Network Topologies: Point-to-point, Point-to-multipoint & Peer-to-peer
- Number of Channels: (software selectable) 16 Direct Sequence Channels
- Addressing Options: PAN ID, Channel and Addresses
- ADC and I/O line support
- AT and API Command Modes for configuring module parameters
- Extensive command set
- Small form factor
SKU: n/a - Indoor Range up to 100 ft. (30 m) &Â Outdoor RF line-of-sight Range up to 300 ft. (100 m)
There are no reviews yet.