L297 & L298 Stepper Motor Driver
L297 L298 Stepper Motor Driver Features
- Easily adjustable motor current (0 to 2A)
- Full and Half stepping modes
- Step, Direction and Enable inputs (5V logic level)
- Synchroniseable when using multiple drivers
- Enable input can be connected to ground to disable the motor
₨750
CompareL297 L298 Stepper Motor Driver allows you to get better performance from your stepper motor. It uses a dual full-bridge motor driver based on SGS Thompson chips L297 & L298.
Motor current for each phase is set using an on-board potentiometer and the controller is capable of handling motor winding currents of up to 2 Amps per phase.
It operates from a DC supply voltage of 9-36V. The drive provides all basic motor controls, including full or half-stepping of bipolar steppers and direction control. Works with large bipolar stepper motors like the MO-101, MO-102 and MO-103.
All signals (Step, Direction, Enable) can be interfaced to external logic or a microcontroller. You can easily control the motor from your computer parallel port or a serial stepper controller card!
L297 L298 Stepper Motor Driver price in pakistan
Based on 0 reviews
Be the first to review “L297 & L298 Stepper Motor Driver”
You must be logged in to post a review.
Related products
-
Modules and Motors
RC522 RFID Card Reader
RC522 RFID Card Reader Features and Benefits
- Highly integrated analog circuitry to demodulate and decode responses
- Buffered output drivers for connecting an antenna with the minimum number of external components
- Supports ISO/IEC 14443 A/MIFARE and NTAG
- The typical operating distance in Read/Write mode is up to 50 mm depending on the antenna size and tuning
- Supports MF1xxS20, MF1xxS70 and MF1xxS50 encryption in Read/Write mode
- Supports ISO/IEC 14443 A higher transfer speed communication up to 848 kBd
- Supports MFIN/MFOUT
- Additional internal power supply to the smart card IC connected via MFIN/MFOUT
- Supported host interfaces
- SPI up to 10 Mbit/s
- I 2C-bus interface up to 400 kBd in Fast mode, up to 3400 kBd in High-speed mode
- RS232 Serial UART up to 1228.8 kBd, with voltage levels dependent on the pin voltage supply
- FIFO buffer handles 64-byte send-and-receive
- Flexible interrupt modes
- Hard reset with low power function
- Power-down by software mode
- Programmable timer
- Internal oscillator for connection to 27.12 MHz quartz crystal
- 2.5 V to 3.3 V power supply
- CRC coprocessor
- Programmable I/O pins
- Internal self-test
SKU: n/a -
-
Modules and Motors
RFID Card 13.56MHz
RFID Card 13.56MHz Specifications:
- Frequency: 13.56MHz
- Communication Protocol: ISO 14443A/B, ISO 15693
- Chip Type: Contactless Smart Card IC (Integrated Circuit)
- Memory Capacity: Varies based on chip type and application requirements (e.g., 1KB, 4KB, or more)
- Operating Range: Standard reading distance up to 10 cm, depending on the RFID reader’s power and antenna design.
- Material: PVC or other durable materials
- Dimensions: Standard credit card size (85.6 x 53.98 mm) or customizable based on specific requirements.
- Operating Temperature: -20°C to +70°C
- Data Encryption: Advanced encryption algorithms for enhanced security
- Compatibility: Compatible with a wide range of RFID readers and devices supporting the 13.56MHz frequency.
SKU: n/a -
Modules and Motors
PL2303 USB To TTL RS232 Converter Adapter Module
PL2303 USB To TTL Converter RS232 Specifications:
- Chipset: PL2303
- Interface: USB 2.0
- Voltage Levels: 3.3V or 5V selectable
- Indicators: Power and data transmission LEDs
- Compatibility: Windows, Linux, macOS
- Dimensions: Compact form factor for easy integration
- Driver Support: Included for easy installation
- Applications: Programming, debugging, and interfacing with microcontrollers and Arduino boards
SKU: n/a -
Modules and Motors
GY-271 Magnetometer HMC5883L Module
GY271 Magnetometer HMC5883L Module Features:
- Gold plating PCB, applying machine welding technology, superb technique and reliable quality guarantee!
- Name: HMC5883L Module (Triaxial Magnetic Field Module);
- Type: GY-271;
- Used Chip: HMC5883L;
- Power Supply: 3~5V;
- Communication Mode: Standard IIC communicating protocol;
- Measuring Range: ±1.3-8 Gauss.
SKU: GY271-Magnetometer
There are no reviews yet.