Zigbee Boards
ZigBee Dongle
ZigBee Dongle Features & Specifications
- Texas Instrument CC2530 SoC
- USB 2.0
- FTDI Virtual COM Port
- ZigBee Profile: Home Automation 1.2
- OTA Programming
- LED Indicator
- Frequencies: 2.4GHz
- Output Power: 17 dBm
- RX Sensitivity: -101 dBm
- Data Rate: 250 kbit/s
- Range: 200 meters (outdoor)
- Operating Humidity: up to 90% non-condensing
- Operating Temperature: -10° to 50°C
- Dimension: 89 x 27.8 x 12.7 mm
₨700
CompareThe ZigBee Dongle kit provides one CC2531 USB Dongle and documentation to support a PC interface to 802.15.4 / ZigBee applications. The dongle can be plugged directly into the PC and can be used as an IEEE 802.15.4 packet sniffer or for other purposes. With the CC2531 USB Firmware Library available on the web user can develop their own software to utilize this part. To program the debugger, an external programmer (e.g. the SmartRF05EB) is required. This is not included in the kit. The USB dongle can be used as a reference module for prototyping of USB devices and for testing the RF performance of CC2531 with a small-size PCB antenna.
Based on 0 reviews
Be the first to review “ZigBee Dongle”
You must be logged in to post a review.
Related products
-
Zigbee Boards
XBEE Breakout Board Zigbee
XBEE Breakout Board Zigbee Features
- Industry’s fastest path to embedded cellular connectivity
- Smallest end-device certified embedded cellular modem on the market
- Pre-certified, Verizon end-device certified, and pre-provisioned on the cellular network</li></li>
- Authentic 20-pin XBee Through-Hole form factor
- Standard XBee AT and API interfaces
- 3.3 V power for battery-powered applications
- OTA firmware updates
- SSL/TLS for secure communications
- Configure locally with XCTU or remotely with Digi Remote Manager
SKU: n/a -
Zigbee Boards
XBEE Module Zigbee (S1/S2)
XBEE Module Features & Specifications:
- Indoor Range up to 100 ft. (30 m) &Â Outdoor RF line-of-sight Range up to 300 ft. (100 m)
- Interface: Serial(UART) at 1200-115200 bps
- Supply Voltage: 2.8 – 3.4 V
- Transmit Current (typical) 45mA (@ 3.3 V)
- Idle / Receive Current (typical) 50mA (@ 3.3 V)
- Operating Frequency:Â ISM 2.4 GHz
- Antenna: Whip antenna
- Supported Network Topologies: Point-to-point, Point-to-multipoint & Peer-to-peer
- Number of Channels: (software selectable) 16 Direct Sequence Channels
- Addressing Options: PAN ID, Channel and Addresses
- ADC and I/O line support
- AT and API Command Modes for configuring module parameters
- Extensive command set
- Small form factor
SKU: n/a - Indoor Range up to 100 ft. (30 m) &Â Outdoor RF line-of-sight Range up to 300 ft. (100 m)
-
Zigbee Boards
XBEE Arduino Shield
XBEE Arduino Shield Features:
- Mounts directly onto your Arduino
- DIN and DOUT pins of XBee can be connected to either the UART pins or any digital pin on the Arduino (D2 and D3 default)
- 3.3V power regulation and MOSFET level shifting on-board
- 9×11 grid of 0.1″ spaced prototyping holes
- The reset button brought out to shield
- Power, DIN, DOUT, RSSI and DIO5 indicator LEDs
SKU: n/a
There are no reviews yet.