TEC1-12706 Peltier
TEC1 12706 Peltier Specifications:
- Model: TEC1-12706
- Size: 40mm x 40mm x 4mm
- Operates from 0~15.2V DC and 0~6A for 12706, in a good condition with heat sink, current will rise to 4A.
- up to 12A for 12712
- Operates Temperature: -55℃～83℃
- Max power consumption: 60 Watts for 12706, 114W for 12712
₨480
CompareTEC1 12706 Peltier Utilized in high-end consumer, commercial, and military-grade applications for extreme performance and maximum energy efficiency, TEC1 Peltier Modules provide unmatched temperature differentials (DTmax) in cooling or heating applications.
Modules from electron.com measure 40x40x3.9mm and offer 68˚C Delta T max (DTmax) at a maximum operating temperature of 138˚C.
Utilized in high-end consumer, commercial, and military-grade applications for extreme performance and maximum energy efficiency, TEC1 Peltier Modules provide unmatched temperature differentials (DTmax) in cooling or heating applications.
TEC1-12706 wholesale price in Pakistan Capable of performing to exacting specifications, cooling or heating with precision in extreme environments, TEC1 Peltier Modules from electron.com have rapidly become an industry standard for numerous exacting thermoelectrics.
IT Utilized in high-end consumer, commercial, and military-grade applications for extreme performance and maximum energy efficiency, TEC1 Peltier Modules provide unmatched temperature differentials (DTmax) in cooling or heating applications.
Based on 0 reviews
Be the first to review “TEC1-12706 Peltier”
You must be logged in to post a review.
Related products
-
Modules and Motors
RFID Card 125KHz
RFID Card 125KHz Specifications:
- Frequency: 125KHz
- Material: PVC or PET, ensuring durability
- Dimensions: Standard credit card size (85.6 x 54 mm)
- Operating Temperature: -20°C to +50°C (-4°F to +122°F)
- Read Range: Dependent on the RFID reader used, typically ranges from a few centimetres to several meters
- Data Storage: Typically has a fixed unique identifier (UID) programmed during manufacturing
- Printable Area: Standard ISO CR80 printing area (84.6 x 53.98 mm)
- Compatibility: Compatible with 125KHz RFID readers adhering to industry standards
“>
SKU: n/a -
-
Modules and Motors
HC06 HC09 Bluetooth Module
HC06 HC09 Bluetooth Module firmware are the modules which are factory set to be Master or Slave modules. Master and slave mode cannot be switched from the factory setting. HC-04 is an industrial grade product, HC-06 is a commercial grade product.
The modules with the HC-09 firmware are replacements for the HC-06 and HC-07 modules.
SKU: n/a -
Modules and Motors
RC522 RFID Card Reader
RC522 RFID Card Reader Features and Benefits
- Highly integrated analog circuitry to demodulate and decode responses
- Buffered output drivers for connecting an antenna with the minimum number of external components
- Supports ISO/IEC 14443 A/MIFARE and NTAG
- The typical operating distance in Read/Write mode is up to 50 mm depending on the antenna size and tuning
- Supports MF1xxS20, MF1xxS70 and MF1xxS50 encryption in Read/Write mode
- Supports ISO/IEC 14443 A higher transfer speed communication up to 848 kBd
- Supports MFIN/MFOUT
- Additional internal power supply to the smart card IC connected via MFIN/MFOUT
- Supported host interfaces
- SPI up to 10 Mbit/s
- I 2C-bus interface up to 400 kBd in Fast mode, up to 3400 kBd in High-speed mode
- RS232 Serial UART up to 1228.8 kBd, with voltage levels dependent on the pin voltage supply
- FIFO buffer handles 64-byte send-and-receive
- Flexible interrupt modes
- Hard reset with low power function
- Power-down by software mode
- Programmable timer
- Internal oscillator for connection to 27.12 MHz quartz crystal
- 2.5 V to 3.3 V power supply
- CRC coprocessor
- Programmable I/O pins
- Internal self-test
SKU: n/a -
Modules and Motors
ACS712 Arduino Current Sensor
ACS712 Arduino Current Sensor Voltage Output
- 1/2 VCC when no load or it is 2.5V since we use 5V as VCC.
- 5A type generate 185mV every amp current
- 20A type generate 100mV every amp current
- 30A type generate 66mV every amp current
SKU: acs712-current-sensor
There are no reviews yet.