Modules and Motors, Programmers and Burners
USB Programmer CH341A Series 24 EEPROM Writer 25 SPI Flash BIOS Board Module USB to TTL 5V-3.3V
USB Programmer CH341A Series 24 Specifications:
- Chipset: CH341A
- Voltage Support: 5V and 3.3V TTL
- Compatibility: Supports a wide range of 24 and 25-series EEPROM and SPI Flash memory chips
- Interface: USB
- LED Indicators: Yes
- Programming Speed: High-speed programming for efficient operations
- Applications: BIOS flashing, firmware development, memory testing, data recovery, etc.
- Software Compatibility: Compatible with user-friendly programming software
- Dimensions: Compact and portable design
₨550
CompareThe USB Programmer CH341A Series 24 EEPROM Writer 25 SPI Flash BIOS Board Module is a versatile and compact device designed for programming a wide range of EEPROM (Electrically Erasable Programmable Read-Only Memory) and SPI Flash memory chips. This USB to TTL module is equipped with the CH341A chipset, providing reliable and efficient communication between your computer and various memory ICs. Whether you’re working on firmware development, BIOS flashing, or data recovery, this programmer offers a user-friendly solution.
Based on 0 reviews
Be the first to review “USB Programmer CH341A Series 24 EEPROM Writer 25 SPI Flash BIOS Board Module USB to TTL 5V-3.3V”
You must be logged in to post a review.
Related products
-
Modules and Motors
ESP-01 ESP8266 WiFi Module
ESP 01 WiFi Module ESP8266 Features
- 802.11 b/g/n protocol
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, and power management units
- +19.5dBm output power in 802.11b mode
- Integrated temperature sensor
- Supports antenna diversity
- Power down leakage current of < 10uA
- Integrated low power 32-bit CPU could be used as application processor
- SDIO 2.0, SPI, UART
- STBC, 1×1 MIMO, 2×1 MIMO
- A-MPDU & A-MSDU aggregation & 0.4s guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
SKU: ESP-01-ESP8266-WiFi-Module -
Modules and Motors
L6203 Motor Driver Dual Full Bridge
L6203 Motor Driver Features
- SUPPLY VOLTAGE UP TO 48V
- 5A MAX PEAK CURRENT (2A max. for L6201)
- TOTAL RMS CURRENT UP TO:4A
- RDS (ON) 0.3 Ω (typical value at 25 °C)
- CROSS CONDUCTION PROTECTION
- TTL COMPATIBLE DRIVE
- OPERATING FREQUENCY UP TO 100 KHz
- THERMAL SHUTDOWN
- INTERNAL LOGIC SUPPLY
- HIGH EFFICIENCY
SKU: n/a -
Modules and Motors
MG996R Servo Motor
MG996R Servo Motor Specifications:
- Weight: 55 g
- Dimensions: Approximately 40.7 x 19.7 x 42.9 mm
- Stall Torque: 9.4 kgf·cm (4.8 V), 11 kgf·cm (6 V)
- Operating Speed: 60° / 0.17s at 4.8V, 60° / 0.14s at 6V
- Operating Voltage: 4.8V – 7.2V
- Current: 500 mA
- Idle Current: 2.5 A (6V)
- Deadband Width: 5 µs
- Stable and shock-resistant dual ball bearing design
- Temperature Range: 0°C – 55°C
SKU: n/a -
Modules and Motors
GY-271 Magnetometer HMC5883L Module
GY271 Magnetometer HMC5883L Module Features:
- Gold plating PCB, applying machine welding technology, superb technique and reliable quality guarantee!
- Name: HMC5883L Module (Triaxial Magnetic Field Module);
- Type: GY-271;
- Used Chip: HMC5883L;
- Power Supply: 3~5V;
- Communication Mode: Standard IIC communicating protocol;
- Measuring Range: ±1.3-8 Gauss.
SKU: GY271-Magnetometer -
Modules and Motors
RC522 RFID Card Reader
RC522 RFID Card Reader Features and Benefits
- Highly integrated analog circuitry to demodulate and decode responses
- Buffered output drivers for connecting an antenna with the minimum number of external components
- Supports ISO/IEC 14443 A/MIFARE and NTAG
- The typical operating distance in Read/Write mode is up to 50 mm depending on the antenna size and tuning
- Supports MF1xxS20, MF1xxS70 and MF1xxS50 encryption in Read/Write mode
- Supports ISO/IEC 14443 A higher transfer speed communication up to 848 kBd
- Supports MFIN/MFOUT
- Additional internal power supply to the smart card IC connected via MFIN/MFOUT
- Supported host interfaces
- SPI up to 10 Mbit/s
- I 2C-bus interface up to 400 kBd in Fast mode, up to 3400 kBd in High-speed mode
- RS232 Serial UART up to 1228.8 kBd, with voltage levels dependent on the pin voltage supply
- FIFO buffer handles 64-byte send-and-receive
- Flexible interrupt modes
- Hard reset with low power function
- Power-down by software mode
- Programmable timer
- Internal oscillator for connection to 27.12 MHz quartz crystal
- 2.5 V to 3.3 V power supply
- CRC coprocessor
- Programmable I/O pins
- Internal self-test
SKU: n/a
There are no reviews yet.