W5100 Ethernet Network Module Mini For Arduino
Out of stock
W5100 Ethernet Network Module Specifications:
- Controller: Wiznet W5100
- Interface: SPI (Serial Peripheral Interface)
- Ethernet Speeds: 10Base-T and 100Base-TX
- MicroSD Card Slot: Yes
- Power Supply: 3.3V (via Arduino) or external power source
- Power Consumption: Low power consumption for energy-efficient operation
- Dimensions: Compact form factor for space-efficient integration
- Status LEDs: Power, Link, Full Duplex, and Speed
- Operating Temperature: -40°C to 85°C
₨1,400
Out of stock
CompareThe Mini W5100 Ethernet Network Module Board for Arduino is a compact and powerful networking solution designed for Arduino enthusiasts and electronic hobbyists. This module integrates the Wiznet W5100 chip, providing seamless Ethernet connectivity to Arduino-based projects. With its small form factor, the Mini W5100 module is ideal for space-constrained applications where networking capabilities are essential.
The Mini W5100 Ethernet Network Module Board for Arduino is a compact and powerful networking solution designed for Arduino enthusiasts and electronic hobbyists. This module integrates the Wiznet W5100 chip, providing seamless Ethernet connectivity to Arduino-based projects. With its small form factor, the Mini W5100 module is ideal for space-constrained applications where networking capabilities are essential.
Based on 0 reviews
Be the first to review “W5100 Ethernet Network Module Mini For Arduino”
You must be logged in to post a review.
Related products
-
Arduino
Arduino Uno R3
Arduino Uno R3 board Specifications:
- It is an ATmega328P based Microcontroller
- The Operating Voltage of the Arduino is 5V
- The recommended input voltage ranges from 7V to 12V
- The i/p voltage (limit) is 6V to 20V
- Digital input and output pins 14
- Digital input & output pins (PWM)-6
- Analog i/p pins are 6
- DC Current for each I/O Pin is 20 mA
- DC Current used for 3.3V Pin is 50 mA
- Flash Memory -32 KB, and 0.5 KB memory is used by the boot loader
- SRAM is 2 KB
- EEPROM is 1 KB
- The speed of the CLK is 16 MHz
- In Built LED
- The length and width of the Arduino are 68.6 mm X 53.4 mm
- The weight of the Arduino board is 25 g
SKU: n/a -
Mother Board, Arduino
CNC Shield V4 Controller Board For Arduino Nano
CNC Shield V4 Controller Board For Arduino Nano Specifications:
- Board Type: CNC Shield V4
- Microcontroller Compatibility: Arduino Nano
- Motor Driver Compatibility: A4988, DRV8825, and similar stepper motor driver modules
- Axis Control: Up to 4 axes
- Endstop Support: Yes, with connectors for limit switches and homing sensors
- PWM Control: Yes, for spindle speed and laser intensity control
- Power Supply Input: 12-36V DC
- Dimensions: Compact form factor for space-efficient installations
Â
SKU: n/a -
Sensors, Arduino
10KG Scale Load Cell Weighing Sensor +HX711 Weighing Sensors AD Module
10KG Scale Load Cell Weighing Sensor +HX711 Weighing Sensors AD Module Specifications:
- Material: Mixture
- Model Number: Load Cell
- Usage: Pressure Sensor
- Type: Acceleration Sensor
- Technical Parameters
- Range: 1一10kg
- Output sensitivity: 1.0±0.1mV/V
- Zero output: ±0.1mV/V
- Nonlinear: 0.05% F.S
- Lag: 0.05% F.S
- Repeatability: 0.05% F.S
- Creep: 0.05% F.S/3min
- Output impedance: 1000±5% ohms
- Zero temperature drift: 0.05% F.S/10°C
- Temperature sensitivity drift: 0.05% F.S/10°C
- Unit Type: piece
- Package Weight:0.035kg (0.08lb.)
- Package Size:10cm x 10cm x 2cm (3.94in x 3.94in x 0.79in)
SKU: n/a
There are no reviews yet.