Shop
Showing 556–570 of 663 results
-
Tools & Instruments
SUNKKO 709A Battery Spot Welder
SUNKKO 709A Battery Spot Welder Specification:- 1. Soldering iron part:
- 2. Temperature: 150°C ~ 450°CÂ
- 3. Power:50 WÂ Â Â Â Â Â
- 4. Output Voltage:20 V DC
- 5. Spot-welder part:
- 6. Supply Voltage: AC 220 V ± 20 V/110V
- 7. Power: 3.2 KW (Instantaneous)Â Â Â
- 8. Current: 500 AÂ Â
- 9. Electric leakage Switch Requirement: 60 A or more than 60 AÂ Â
- 10. Time of Double Pulse: 1 ~ 10 ms (adjustable)
- 11. Time of Four Pulses: 2 ~ 20 ms (adjustable)
- 12. Time of Eight Pulses: 8 ~ 80 ms (adjustable)
- 13. Welding Pin Rangee: 5 – 6 mm
- 14. Welding Pressure: 300 – 500 g
- 15. Welding Distance: Adjustable
- 16. Suitable Welding Thickness: 0.03 – 0.3 mm, Max. 0.2mm for welding pen
SKU: n/a -
Modules and Motors
Sx1278 LoRa Module
Ra-02 is a wireless transmission module based on SEMTECH’s SX1278 wireless transceiver. It adopts advanced LoRa spread spectrum technology, with a communication distance of 10,000 meters. It has strong ability of anti-jamming and has the function of air wake-up Consumption.
SKU: n/a -
Breakout Boards
SYB-170 Mini Breadboard
SYB 170 Mini Breadboard Specifications:
- Type: SYB170
- Hole diameter: 1 mm / 0.04 inches
- Hole-pitch: 2.54 mm / 0.1 inches
- Thickness: 10mm
- Voltage: 300v
- low current: <5A
- Compatible with Raspberry Pi and ArduinoÂ
- Compatible with Raspberry Pi (RPI) and Arduino, LED, screw terminal, DuPont wire, connector, capacitor, resistor, IC, DIP, sensors, transistor and other electric power components or devices
SKU: mini-breadboard -
Breakout Boards
TB6560 3A Single-Axis CNC Router Stepper Motor Driver Board
Specification:
- Size: 75 x 50 x 35mm / 2.95 x 1.96 x 1.37inch (L x W x H)
- Rated maximum output: ± 3A, peak 3.5A
- Working voltage: DC 10V-35V
- Recommended to use a switching power supply: DC24V power supply is used in it.
- Subdivision: whole step, half-step, step 1/8, 1/16 step, a maximum of 16 Subdivisions.
="text/javascript">>
SKU: n/a -
Modules and Motors
TB6600 Stepper Motor Driver Controller 4A 9~42V 32 Micro-Step CNC 1 Axis
Signal Input Terminal- CP +: pulse signal input positive terminal.
- CP-: pulse signal input negative terminal.
- DIR +: the motor reverse control of the positive terminal.
- DIR-: the motor reverse control of the negative terminal.
- EN +: motor off control of the positive terminal.
- EN-: motor off control of the negative terminal.
Motor winding connection:- A +: A + phase motor winding connection.
- A-: A- phase motor winding connection.
- B +: B + phase motor winding connection.
- B-: B- phase motor winding connection.
Operating voltage connection:- VCC: DC power positive (Note: 10V <VCC <42V).
- GND: DC power supply negative.
SKU: n/a -
Sensors
TCRT5000 IR Sensor
TCRT5000 IR Sensor Features:
- Package type: leaded
- Detector type: phototransistor
- Dimensions (L x W x H in mm): 10.2 x 5.8 x 7
- Peak operating distance: 2.5 mm
- Operating range within > 20 % relative collector current: 0.2 mm to 15 mm
- Typical output current under test: IC = 1 mA
- Daylight blocking filter
- Emitter wavelength: 950 nm
- Lead (Pb)-free soldering released
- Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC
SKU: n/a -
Sensors
TCRT5000 Line Following Sensor Module
Features:Â
- Supply Voltage: 3.3V~5V DC
- Detection distance: 1mm – 8mm
- Digital Outputs HIGH when an object is detected
- On-board indicator LED to show the results
- On-board potentiometer to adjust the sensitivity
- On-board LM393 chip
- Usually used for line following robot
SKU: n/a -
Sensors
TCS3200 Color Sensor for Arduino
TCS3200 Color Sensor Specifications
- Single-Supply Operation (2.7 V to 5.5 V)
- High-Resolution Conversion of Light Intensity to Frequency
- Programmable Color and Full-Scale Output Frequency
- Power Down Feature
- Communicates Directly to Micro-controller
- S0~S1: Output frequency scaling selection inputs
- S2~S3: Photo-diode type selection inputs
- OUT Pin: Output frequency
- OE Pin: Output frequency enable pin (active low), can be impending when using
- Support LED lamp light supplement control
- Size: 28.4 x 28.4 mm
SKU: n/a -
Modules and Motors
TDA7297 Audio Amplifier Module
TDA7297 Audio Amplifier Module Specifications:
- Output Power: 15W + 15W (RMS)
- Supply Voltage: 6V – 18V DC
- Input Impedance: 22k ohms
- Signal-to-Noise Ratio (SNR): > 85 dB
- Total Harmonic Distortion (THD): < 0.05%
- Frequency Response: 20Hz – 20kHz
- Efficiency: > 90%
- Dimensions: 65mm x 56mm x 20mm (L x W x H)
- The Blue LED indicator light will be on when amplifier power on.
SKU: n/a -
Modules and Motors
TDA7492 Wireless Bluetooth Receiver Digital Audio Amplifier Board 50W 50W
Specifications:
- Amplifier Chip: TDA7492 Class D
- Output Power: 50W+50W (Stereo)
- Bluetooth Version: 4.0
- Input Voltage: DC 8-25V
- Input Impedance: 470 ohms
- SNR (Signal-to-Noise Ratio): 80dB
- Frequency Response: 20Hz – 20kHz
- Efficiency: 90%
- Dimensions: [Insert Dimensions Here]
- Weight: [Insert Weight Here]
- Input Connector: Bluetooth, 3.5mm Audio Jack
- Protection Features: Overcurrent, Overtemperature, Short-Circuit
SKU: n/a -
Modules and Motors
TDA8954TH Amplifier Board Dual Channel XH-M252
TDA8954TH Amplifier Board Specifications:
- Product Model: XH-M252
- Amplifier chip: TDA8954TH
- Input voltage: recommended AC dual 24V (up to 30V)
- Amplifier power: 2x420W
- Number of channels: left and right stereo
- Output impedance: 2-8Ohm
- Appearance size: 107*93*30mm
SKU: n/a -
Modules and Motors
TEC1-12706 Peltier
TEC1 12706 Peltier Specifications:
- Model: TEC1-12706
- Size: 40mm x 40mm x 4mm
- Operates from 0~15.2V DC and 0~6A for 12706, in a good condition with heat sink, current will rise to 4A.
- up to 12A for 12712
- Operates Temperature: -55℃～83℃
- Max power consumption: 60 Watts for 12706, 114W for 12712
SKU: n/a -
Modules and Motors
TEC1-12710 Thermo-electric Cooler Peltier
TEC1 12710 Thermoelectric Cooler Peltier Specifications:
- Model: TEC1 12710
- Voltage: 12V
- Current: 10A
- Power: 120W
- Maximum Temperature Difference (Delta T): Up to 65°C
- Operating Temperature Range: -40°C to 90°C
- Dimensions: 40mm x 40mm x 3.6mm
- Material: Ceramic and Semiconductor
- Weight: Approximately 50 grams
- Lead Length: 300mm (approx.)
SKU: n/a -
Modules and Motors
TEC1-12715 12V Heat Sink Thermoelectric Cooler Peltier Plate Module
TEC1 12715 Heat Sink Module Specifications:
- Voltage: 12V DC
- Current: 15A
- Maximum Power Consumption: 180 Watts
- Temperature Difference (∆Tmax): Up to 67°C
- Dimensions: 40mm x 40mm x 3.6mm
- Number of Thermocouples: 127 Couples
- Material: Ceramic and Semiconductor Bi-Element
- Operating Temperature Range: -30°C to 70°C
- Weight: Approximately 60 grams
SKU: n/a
