Shop
Showing 91–105 of 663 results
-
IC and IC Sockets
7LB179 SOP IC
Features:
• Designed for high-speed multipoint data transmission over long cables
• Operates with pulse widths as low as 30 ns
• Low supply current: 5 mA max
• Meets or exceeds the standard requirements ofANSI RS-485 and ISO 8482:1987(E)
• Common-mode voltage range of − 7 V to 12 V
• Positive-and negative-output current limiting
• Driver thermal shutdown protection
• Pin compatible with the SN75179BSKU: n/a -
-
Sensors, Arduino, Modules and Motors
801S Vibration Shock Sensor For Arduino
801S Vibration Shock Sensor For Arduino Specifications:
- Operating Voltage: 3.3V – 5V DC
- Current Consumption: <1mA
- Output Type:
- Digital Output: High/Low (TTL)
- Analog Output: 0V to Vcc (0 – 5V)
- Detection Range: Adjustable via sensitivity potentiometer
- Frequency Response: 10Hz – 10kHz
- Dimensions: 32mm x 14mm x 7mm
- Mounting Holes: Two mounting holes for easy integration into various projects.
- Operating Temperature: -10°C to +70°C
- Interface: 3-pin interface (VCC, GND, Signal)
- Compatibility: Compatible with Arduino and other microcontrollers with digital and analog input capabilities.
SKU: n/a -
Transistors
A1015 PNP Transistor
Features and Technical Specifications:
- Type: PNP
- Power Dissipation: 0.4watts
- High voltage and High current: Vceo = 50v and Ic = 150mA
- Low Noise: 1dB
- Case Material: molded plastic
- Collector power dissipation: 400mW
- DC current gain: 400
- Collector-Emitter and Collector Base breakdown voltage: 50Vdc
- Base Emitter Saturation Voltage: 1.1Vdc
- Collector-Emitter Saturation Voltage: 0.3Vdc
- Base Emitter voltage: 1.45Vdc
- Complementary to 2SC1815
- Operating Temperature and Storage Temperature: -55℃ to +150℃
SKU: n/a -
MOSFETs, IGBTs and BJTs, ICs and Optocouplers
A3120 IC HCPL3120 DIP8 SOP8 Driver
Features:
- 2.0 A Minimum Peak Output Current
- 15 kV/µs Minimum Common Mode Rejection (CMR) at VCM = 1500 V
- 0.5 V Maximum Low-Level Output Voltage (VOL) Eliminates the Need for a Negative Gate Drive
- ICC = 5 mA Maximum Supply Current
- Under Voltage Lock-Out Protection (UVLO) with Hysteresis
- Wide Operating VCC Range: 15 to 30 Volts
- 500 ns Maximum Switching Speeds
- Industrial Temperature Range : -40°C to 100°C
SKU: n/a -
Sensors
A3144 Hall Effect Sensor
 A3144 Hall Effect Sensor Features
- Digital Output Hall-effect sensor
- Operating voltage: 4.5V to 28V (typically 5V)
- Output Current: 25mA
- Can be used to detect both the poles of a magnet
- Output voltage is equal to operating voltage
- Operating temperature: -40°C to 85°C
- Turn on and Turn off time is 2uS each
- Inbuilt reverse polarity protection
- Suitable for Automotive and Industrial Applications
SKU: n/a -
Modules and Motors
A3144EUA Sensor
A3144EUA Sensor FEATURES and BENEFITS
- Superior Temp. Stability for Automotive or Industrial Applications
- 4.5 V to 24 V Operation … Needs Only An Unregulated Supply
- Open-Collector 25 mA Output … Compatible with Digital Logic
- Reverse Battery Protection
- Activate with Small, Commercially Available Permanent Magnets
- Solid-State Reliability
- Small Size
- Resistant to Physical Stress
SKU: n/a -
ICs and Optocouplers, MOSFETs, IGBTs and BJTs
A3150 IC HCPL3150 DIP8 SOP8 Driver
A3150 IC HCPL3150 Driver Features
- 0.5 A Minimum Peak Output
- Current
- 15 kV/µs Minimum Common
- Mode Rejection (CMR) at
- VCM = 1500 V
- 1.0 V Maximum Low Level
- Output Voltage (VOL)
- Eliminates Need for
- Negative Gate Drive
- ICC = 5 mA Maximum Supply
- Current
- Under Voltage Lock-Out
- Protection (UVLO) with
- Hysteresis
- Wide Operating VCC Range:
- 15 to 30 Volts
- 500 ns Maximum Switching
- Speeds
- Industrial Temperature
- Range: -40°C to 100°C
- Safety and Regulatory
- Approval: UL Recognized
- 2500 Vrms for 1 min. per
- UL1577
- VDE 0884 Approved with VIORM = 630 Vpeak (Option 060 only)
- CSA Approved
SKU: n/a -
Sensors
A44E Hall Effect Sensor AH44E
A44E Hall Effect Sensor AH44E Features :
- Hall-effect sensor with a digital output.
- Operating voltage ranges from 4.5V to 28V. (typically 5V).
- The output current is 25 milliamps.
- It is possible to utilize a magnet to detect both of its poles.
- The voltage at the output is the same as the voltage at the operating point.
- The operating temperature ranges from -40°C to 85°C.
- The time it takes to turn on and turn off is 2uS each.
- Built-in protection against reverse polarity.
- Suitability for use in automotive and industrial applications
SKU: n/a -
Modules and Motors
A4988 Stepper Motor Driver
Specifications:
- Input Voltage Range: 8V to 35V
- Maximum Output Current: 2A per phase (with proper heatsinking)
- Logic Voltage: 3.3V or 5V (compatible with most microcontrollers)
- Step Modes: Full, 1/2, 1/4, 1/8, 1/16 micro-stepping
- Dimensions: Compact PCB design, suitable for integration into various projects
- Operating Temperature Range: -20°C to 85°C
- Protection Features: Thermal shutdown, crossover-current protection
- Control Interface: Step and direction control
- PCB Layers: 4-layer, high-quality PCB for reliable performance
- Connector Type: Compatible with standard stepper motor connectors, facilitating easy integration into existing systems.
Â
SKU: n/a -
Modules and Motors
A6 GPRS GSM SMS Module Development Board
Technical Specifications
- Dimensions: Approximately 20mm x 18mm x 3mm
- Other Specifications: Same as the standard A6 module
Applications
- Wearable Devices: Ideal for integration into small, portable devices.
- Compact IoT Solutions: Suitable for IoT applications requiring minimal space.
- Portable Communication: Perfect for projects that need mobile communication in a small form factor.
SKU: n/a
