Modules and Motors
Showing 16–30 of 140 results
-
Modules and Motors
A3144EUA Sensor
A3144EUA Sensor FEATURES and BENEFITS
- Superior Temp. Stability for Automotive or Industrial Applications
- 4.5 V to 24 V Operation … Needs Only An Unregulated Supply
- Open-Collector 25 mA Output … Compatible with Digital Logic
- Reverse Battery Protection
- Activate with Small, Commercially Available Permanent Magnets
- Solid-State Reliability
- Small Size
- Resistant to Physical Stress
SKU: n/a -
Modules and Motors
A4988 Stepper Motor Driver
Specifications:
- Input Voltage Range: 8V to 35V
- Maximum Output Current: 2A per phase (with proper heatsinking)
- Logic Voltage: 3.3V or 5V (compatible with most microcontrollers)
- Step Modes: Full, 1/2, 1/4, 1/8, 1/16 micro-stepping
- Dimensions: Compact PCB design, suitable for integration into various projects
- Operating Temperature Range: -20°C to 85°C
- Protection Features: Thermal shutdown, crossover-current protection
- Control Interface: Step and direction control
- PCB Layers: 4-layer, high-quality PCB for reliable performance
- Connector Type: Compatible with standard stepper motor connectors, facilitating easy integration into existing systems.
SKU: n/a -
Modules and Motors
A6 GPRS GSM SMS Module Development Board
Technical Specifications
- Dimensions: Approximately 20mm x 18mm x 3mm
- Other Specifications: Same as the standard A6 module
Applications
- Wearable Devices: Ideal for integration into small, portable devices.
- Compact IoT Solutions: Suitable for IoT applications requiring minimal space.
- Portable Communication: Perfect for projects that need mobile communication in a small form factor.
SKU: n/a -
Modules and Motors
ACS712 Arduino Current Sensor
ACS712 Arduino Current Sensor Voltage Output
- 1/2 VCC when no load or it is 2.5V since we use 5V as VCC.
- 5A type generate 185mV every amp current
- 20A type generate 100mV every amp current
- 30A type generate 66mV every amp current
SKU: acs712-current-sensor -
Sensors, Arduino, Modules and Motors
Arduino KY-032 Obstacle Avoidance Sensor Module
Arduino KY 032 Sensor Module Specifications:
- Operating Voltage: 3.3V to 5V
- Detection Range: Adjustable, typically 2cm to 30cm
- Operating Current: <25mA
- Output Type:
- Digital Output (D0): High/Low signal indicating obstacle presence
- Analog Output (A0): Voltage proportional to the distance from the obstacle
- Indicator: Built-in status LED
- Dimensions: 30mm x 14mm x 8mm (L x W x H)
- Mounting Holes: Yes, for convenient installation
- Interface: 3-pin header for easy connection to Arduino
- Material: Quality materials for durability and reliability in various environments.
SKU: n/a -
Modules and Motors
BH1750 Light Sensor
BH1750 Light Sensor Features
- Illuminate to Digital Converter
- Wide range and High resolution. ( 1 – 65535 lx )
- Low Current by power down function
- 50Hz / 60Hz Light noise reject-function
- I2C bus Interface ( f / s Mode Support )
- No need for any external parts
- It is possible to select 2 types of I2C slave-address.
- It is possible to detect min. 0.11 lx, max. 100000 lx by using this function.
SKU: n/a -
Modules and Motors
Bluetooth Module BLE-CC-2541
Features
- RF
- 2.4-GHz Bluetooth low energy Compliant and Proprietary RF System-on-Chip
- Supports 250-kbps, 500-kbps, 1-Mbps, 2-Mbps Data Rates
- Excellent Link Budget, Enabling Long-Range Applications Without External Front End
- Programmable Output Power up to 0 dBm
- Excellent Receiver Sensitivity (–94 dBm at 1 Mbps), Selectivity,
and Blocking Performance - Suitable for Systems Targeting Compliance With Worldwide Radio
Frequency Regulations: ETSI EN 300 328 and EN 300 440 Class 2 (Europe),
FCC CFR47 Part 15 (US), and ARIB STD-T66 (Japan)
- Layout
- Few External Components
- Reference Design Provided
- 6-mm × 6-mm QFN-40 Package
- Pin-Compatible With CC2540 (When Not Using USB or I2C)
- Low Power
- Active-Mode RX Down to: 17.9 mA
- Active-Mode TX (0 dBm): 18.2 mA
- Power Mode 1 (4-µs Wake-Up): 270 µA
- Power Mode 2 (Sleep Timer On): 1 µA
- Power Mode 3 (External Interrupts): 0.5 µA
- Wide Supply-Voltage Range (2 V–3.6 V)
- TPS62730 Compatible Low Power in Active Mode
- RX Down to: 14.7 mA (3-V supply)
- TX (0 dBm): 14.3 mA (3-V supply)
- Microcontroller
- High-Performance and Low-Power 8051 Microcontroller Core
With Code Prefetch - In-System-Programmable Flash, 128- or 256-KB
- 8-KB RAM With Retention in All Power Modes
- Hardware Debug Support
- Extensive Baseband Automation, Including Auto-Acknowledgment
and Address Decoding - Retention of All Relevant Registers in All Power Modes
- High-Performance and Low-Power 8051 Microcontroller Core
- Peripherals
- Powerful Five-Channel DMA
- General-Purpose Timers (One 16-Bit, Two 8-Bit)
- IR Generation Circuitry
- 32-kHz Sleep Timer With Capture
- Accurate Digital RSSI Support
- Battery Monitor and Temperature Sensor
- 12-Bit ADC With Eight Channels and Configurable Resolution
- AES Security Coprocessor
- Two Powerful USARTs With Support for Several Serial Protocols
- 23 General-Purpose I/O Pins
(21 × 4 mA, 2 × 20 mA) - I2C interface
- 2 I/O Pins Have LED Driving Capabilities
- Watchdog Timer
- Integrated High-PerformanceComparator
- Development Tools
- CC2541 Evaluation Module Kit (CC2541EMK)
- CC2541 Mini Development Kit (CC2541DK-MINI)
- SmartRF™ Software
- IAR Embedded Workbench™ Available
SKU: n/a - RF
-
Sensors, Modules and Motors
BMP180 Barometric Pressure Sensor Module
BMP180 Barometric Pressure Sensor Module Specifications:
- Pressure Range: 300 hPa to 1100 hPa (9000 meters to -500 meters above sea level)
- Pressure Accuracy: ±0.12 hPa
- Temperature Range: -40°C to +85°C
- Temperature Accuracy: ±2°C
- Resolution:
- Pressure: 0.01 hPa
- Temperature: 0.1°C
- Operating Voltage: 1.8V to 3.6V
- I2C Address: 0x77 (0xEE for write, 0xEF for read)
- Dimensions: Compact form factor with standard mounting holes for easy integration (specific dimensions vary by manufacturer).
<script src="moz-extension://f26db0f4-f100-4dfb-9692-7da94f91d630/js/app.js" type="text/javascript">
SKU: n/a -
Sensors, Modules and Motors
BMP280 Pressure Sensor Module
Specifications:
- Pressure Range: 300 hPa to 1100 hPa
- Pressure Accuracy: ±1.0 hPa
- Temperature Range: -40°C to +85°C
- Temperature Accuracy: ±0.5°C
- Digital Interface: I2C and SPI
- Supply Voltage: 1.8V to 3.6V
- Current Consumption: 2.7 µA at 1 Hz measurement rate
- Resolution: 0.01 hPa (Pressure), 0.01°C (Temperature)
- Dimensions: Compact and space-saving design
- Operating Modes: Normal, Forced, and Sleep mode for optimized power consumption
- Calibration Coefficients: Stored in on-chip memory for precise sensor compensation
SKU: n/a -
-
Modules and Motors
CH340 USB To TTL Converter Adapter Module
Features:
- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
- TTL interface output, easy to connect to your MCU.
- Status LED.
- Dual 3.3V and 5V Power output, work with 3.3v and 5v target device.
- Size:55mm * 16mm
SKU: n/a -
Arduino, Modules and Motors
Data Logger Shield RTC
Data Logger Shield RTC Specifications:
- RTC Module: DS3231 or similar high-precision RTC
- Storage Compatibility: MicroSD cards (standard format)
- Voltage Requirements: 5V DC
- Current Consumption: Low-power design for extended battery life
- Compatibility: Arduino Uno, Arduino Mega, and other compatible boards
- Dimensions: Standard Arduino form factor
- Operating Temperature: -20°C to +85°C
- Interface: SPI communication for microSD card; I2C communication for RTC
SKU: n/a -
Sensors, Arduino, Modules and Motors
DC Voltage Sensor Module for Arduino 0-25V
DC Voltage Sensor Module Arduino Specifications:
- Voltage Range: 0 to 25V DC
- Input Voltage: 5V DC (supplied by Arduino)
- Output Type: Analog Voltage
- Accuracy: ±1%
- Operating Temperature: -10°C to +70°C
- LED Indicator: Yes
- Reverse Polarity Protection: Yes
- Dimensions: (L x W x H) 2.5 cm x 1.5 cm x 0.8 cm
- Weight: 5 grams
- Interface: 3-pin header for easy connection to Arduino
SKU: n/a -
Modules and Motors
DHT11 Temperature and Humidity Sensor Module
TECHNICAL SPECIFICATIONS：
Power Supply： 3.3~5.5V DC
Output： 4 pin single row
Measurement Range： Humidity 20-90%RH， Temperature 0~50℃
Accuracy： Humidity +-5%RH， Temperature +-2℃
Resolution： Humidity 1%RH， Temperature 1℃
Interchangeability： Fully Interchangeable
Long-Term Stability： <±1%RH/yearSKU: n/a
