Modules and Motors
Showing 31–45 of 134 results
-
Modules and Motors
EasyDriver Stepper Motor Driver
EasyDriver Stepper Motor Driver Features:
- A3967 Microstepping Driver
- MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)
- Compatible with 4, 6, and 8 wire stepper motors of any voltage
- Adjustable current control from 150mA/phase to 700mA/phase
Power supply range from 6V to 30V. The higher the voltage, the higher the torque at high speeds
SKU: n/a -
Modules and Motors
EGS002 Pure Sine Wave Inverter SPWM Driver Board 5V
EGS002 Pure Sine Wave Inverter SPWM Driver Board Specifications:
- 5V power supply
- 4 pins of pure sine wave output frequency set:
- Integrated and bipolar modulation
- Along with lineage control, pin 4 time:
- External 12 MHz crystal oscillator
- PWM carrier frequency is equal to 23.4KHz
- Has voltage, current and temperature feedback
- Overvoltage, under voltage, overcurrent, overheating protection circuit
- Has serial communication to adjust the output voltage, frequency and other parameters
“>
SKU: n/a -
Modules and Motors
EM-18 RFID Reader Module
EM 18 RFID Reader Module Specifications:
- Operating frequency: 125kHz
- Operating voltage: DC 5V
- Supply current: <50mA
- Read distance: up to 100mm (depending on the tag used)
- Interface: UART (TTL level)
- Dimensions: 40mm x 40mm x 16mm
- Communication protocol: UART
- Baud rate: 9600, 8, N, 1
SKU: n/a -
Modules and Motors
ESP-01 ESP8266 WiFi Module
ESP 01 WiFi Module ESP8266 Features
- 802.11 b/g/n protocol
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, and power management units
- +19.5dBm output power in 802.11b mode
- Integrated temperature sensor
- Supports antenna diversity
- Power down leakage current of < 10uA
- Integrated low power 32-bit CPU could be used as application processor
- SDIO 2.0, SPI, UART
- STBC, 1×1 MIMO, 2×1 MIMO
- A-MPDU & A-MSDU aggregation & 0.4s guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
SKU: ESP-01-ESP8266-WiFi-Module -
-
Modules and Motors
ESP32 38 Pin Development Board Microcontroller Processor
ESP32 38 Pin Development Board Description:
- Dual core ESP-32 development board, 2.4GHz Dual Mode Development Board.The module has 38 pins and has more features than a 30-pin module. And smaller in size, more convenient to use.
- Ultra-Low power consumption,small volume, easy to embed to other products, works perfectly compatible with Arduino IDE.
- Support Lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA.
- ESP32 is a safe, reliable, and scalable to a variety of applications,the user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values exceed the threshold.
SKU: n/a -
Modules and Motors
ESP32 Cam Wifi Bluetooth Camera Module Development Board
ESP32 Cam Module Features:
- The smallest 802.11b/g/n Wi-Fi BT SoC module
- Low power 32-bit CPU,can also serve the application processor
- Up to 160MHz clock speed, summary computing power up to 600 DMIPS
- Built-in 520 KB SRAM, external 4MPSRAM
- Supports UART/SPI/I2C/PWM/ADC/DAC
- Support OV2640 and OV7670 cameras, built-in flash lamp
- Support image WiFI upload
- Support TF card
- Supports multiple sleep modes
- Embedded Lwip and FreeRTOS
- Supports STA/AP/STA+AP operation mode
- Support Smart Config/AirKiss technology
- Support for serial port local and remote firmware upgrades (FOTA)
SKU: n/a -
Modules and Motors
ESP32D WROOM Board Wifi Bluetooth Module
ESP32D WROOM Board Features:
- Dual-core Xtensa® 32-bit LX6 MCU: For high-performance computing
- 448 KB ROM: Ensures quick booting and core functionalities
- 520 KB On-Chip SRAM: Ample space for data and instructions
- High-Temperature Range: Operates between -40 °C ~ +105 °C
- Advanced Power-Management: Optimizes power consumption
- Multiple External QSPI Flash and SRAM Support: For extended memory
- AES Hardware Encryption/Decryption: Ensures data security
- OTA Support: Secure and effortless over-the-air upgrade
SKU: n/a -
Modules and Motors
Flex Sensor 2.2 Inch
Flex Sensor 2.2 inch Product Specification
- Type Flex Sensor
- Sensor Type Bend Sensor
- Power Consumption 240 V
- Weight G 20 Gram
- Flat Resistance 10K Ohms +-30%.
- Power Rating 0.5 Watts.
- Bend Resistance Minimum 20k Ohms +-30% (@ 180 Degree Pinch Bend)
- Height 0.43mm (0.017″)
- Total Length 2.2″ (7 cm).
- Size 2.2 Inches
- Flex length 5.6 cm.
- Application Hand Gesture Recognition
- Life Cycle >1 million.
SKU: n/a -
Modules and Motors
Flex Sensor 4.5 Inch
- Model/Type Flex Sensor 4.5 Inch
- Brand SEES
- Weight G 10.0 grams
- Height Less Than 0.43 mm (0.017 Inch)
- Power Rating 0.50 Watts continuous. 1 Watt Peak
- Resistance Tolerance +-30 %
- Bend Resistance Range 60K to 110K Ohms
- Temperature Range -35 to +80 Degrees C
SKU: n/a -
Modules and Motors
FT232 USB To TTL RS485 Converter Adapter Module
FT232 USB To TTL Converter RS485 Module Specifications:
- Chipset: FT232RL USB to UART converter chip
- Interface: USB 2.0
- Supported Networks: RS485, TTL Serial
- LED Indicators: Power, Data Transmission
- Operating Voltage: 3.3V to 5V
- Baud Rate Range: Adjustable, up to 3 Mbps
- Operating Temperature Range: -20°C to 60°C
- Dimensions: Compact form factor for easy integration (specific dimensions provided in the product documentation)
- Compatibility: Windows, macOS, Linux, and other major operating systems
- Plug-and-Play: Yes, no additional drivers required for most operating systems.
SKU: n/a -
Modules and Motors
GY-271 Magnetometer HMC5883L Module
GY271 Magnetometer HMC5883L Module Features:
- Gold plating PCB, applying machine welding technology, superb technique and reliable quality guarantee!
- Name: HMC5883L Module (Triaxial Magnetic Field Module);
- Type: GY-271;
- Used Chip: HMC5883L;
- Power Supply: 3~5V;
- Communication Mode: Standard IIC communicating protocol;
- Measuring Range: ±1.3-8 Gauss.
SKU: GY271-Magnetometer -
Modules and Motors
GY-291 ADXL345 Accelerometer
GY 291 Sensor ADXL345 Accelerometer Features
- Ultra low power: as low as 40µA in measurement mode and 0.1µA in standby mode at VS = 2.5V (typical)
- Power consumption scales automatically with bandwidth
- The user-selectable resolution, fixed 10-bit resolution, or full resolution, where resolution increases with g range, up to 13-bit resolution at ±16 g (maintaining 4 mg/LSB scale factor in all g ranges)
- Embedded, patent-pending FIFO technology minimizes host processor load
- Tap/double tap detection
- Activity/inactivity monitoring
- Free-fall detection
- Supply voltage range: 2.0V to 3.6V
- I/O voltage range: 1.7V to VS
SKU: n/a -
Modules and Motors
GY-61 ADXL335 Accelerometer
GY61 Sensor ADXL335 Accelerometer Features and Benefits
- 3-axis sensing
- Small, low-profile package
- 4 mm × 4 mm × 1.45 mm LFCSP
- Low power – 350 μA (typical)
- Single-supply operation 1.8 V to 3.6 V
- 10,000 g shock survival
- Excellent temperature stability
- BW adjustment with a single capacitor per axis
- RoHS/WEEE lead-free compliant
SKU: n/a