The 2.4-inch TFT LCD Arduino is a compact and versatile display module designed for use with Arduino boards. This high-resolution color screen provides a vibrant and clear interface, making it ideal for various DIY electronics projects, educational purposes, and prototyping applications. With easy compatibility and a user-friendly interface, this TFT LCD enhances the visual experience of your Arduino projects.
LCDs
2.4 Inch TFT LCD For Arduino
2.4 Inch TFT LCD Arduino Specifications:
- 2.4″ diagonal LCD TFT display
- 240×320 resolution
- 5V compatible! Use with 3.3V or 5V logic
- Onboard 3.3V 300mA LDO regulator
- 8-bit digital interface, plus 4 control lines
- 4-wire resistive touchscreen
- Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, and 3 and analog 4 and 5. Pin 12 is available if not using the microSD
₨2,200
Compare
Based on 0 reviews
0.0 overall
0
0
0
0
0
Be the first to review “2.4 Inch TFT LCD For Arduino” Cancel reply
You must be logged in to post a review.
Related products
-
Arduino, Modules and Motors
Data Logger Shield RTC
0 out of 5(0)Data Logger Shield RTC Specifications:
- RTC Module: DS3231 or similar high-precision RTC
- Storage Compatibility: MicroSD cards (standard format)
- Voltage Requirements: 5V DC
- Current Consumption: Low-power design for extended battery life
- Compatibility: Arduino Uno, Arduino Mega, and other compatible boards
- Dimensions: Standard Arduino form factor
- Operating Temperature: -20°C to +85°C
- Interface: SPI communication for microSD card; I2C communication for RTC
SKU: n/a -
Arduino
Arduino TFT Display 3.2 Inch LCD
0 out of 5(0)Arduino TFT Display 3.2 Inch LCD Features:
- Support Arduino Mega2560 Directly inserted
- With a Full-angle IPS TFT panel
- OnBorad level conversion chip for 5V/3.3V MCU
- Compatible with 3.3/5 V operation voltage level
- Compatible with Arduino-Series Development Board.
- (Please notice: This Screen is not a touch screen)
- Provided 12-examples with Arduino,3-examples with STM32
- With an SD Card Socket
- With SPI FLASH circuit
Specifications:
- Driver IC: ILI9481
- Screen Size: 3.2 inch
- Display Size : 67.68(W) * 45.12(L) (mm)
- Backlight Type: Highlighting White 6 LED
- Screen Resolution: 480 * 320 Pixel (HVGA)
- Power Consumption : 80~110(mA)
- Screen Type: TFT (IPS Whole Perspective)
- Power : 5V / 3.3V
- Touch Function: None
- Data Bus: 16 Channels Parallel Bus
- Module Interface : 36Pin (Compatible with Arduino Mega2560)
- Size : 89.92(W) * 54.25(L) (mm)
SKU: n/a -
Sensors, Arduino, Modules and Motors
DC Voltage Sensor Module for Arduino 0-25V
0 out of 5(0)DC Voltage Sensor Module Arduino Specifications:
- Voltage Range: 0 to 25V DC
- Input Voltage: 5V DC (supplied by Arduino)
- Output Type: Analog Voltage
- Accuracy: ±1%
- Operating Temperature: -10°C to +70°C
- LED Indicator: Yes
- Reverse Polarity Protection: Yes
- Dimensions: (L x W x H) 2.5 cm x 1.5 cm x 0.8 cm
- Weight: 5 grams
- Interface: 3-pin header for easy connection to Arduino
SKU: n/a -
Sensors, Arduino, Modules and Motors
801S Vibration Shock Sensor For Arduino
0 out of 5(0)801S Vibration Shock Sensor For Arduino Specifications:
- Operating Voltage: 3.3V – 5V DC
- Current Consumption: <1mA
- Output Type:
- Digital Output: High/Low (TTL)
- Analog Output: 0V to Vcc (0 – 5V)
- Detection Range: Adjustable via sensitivity potentiometer
- Frequency Response: 10Hz – 10kHz
- Dimensions: 32mm x 14mm x 7mm
- Mounting Holes: Two mounting holes for easy integration into various projects.
- Operating Temperature: -10°C to +70°C
- Interface: 3-pin interface (VCC, GND, Signal)
- Compatibility: Compatible with Arduino and other microcontrollers with digital and analog input capabilities.
SKU: n/a -
Modules and Motors, Arduino, Raspberry Pi
TM1637 LED Display Module Tube For Arduino Raspberry PI
0 out of 5(0)TM1637 LED Display Module Specifications:
- Using CMOS technology
- Display mode (6-Digit 8 Segment), support a total of positive digital tube output
- Key scan (8X2bit), enhanced anti-jamming key recognition circuit
- Gray scale adjustment circuit (duty cycle 8 adjustable)
- Two-wire serial interface (CLK, DIO)
SKU: n/a
There are no reviews yet.