LCDs
2.4 Inch TFT LCD For Arduino
2.4 Inch TFT LCD Arduino Specifications:
- 2.4″ diagonal LCD TFT display
- 240×320 resolution
- 5V compatible! Use with 3.3V or 5V logic
- Onboard 3.3V 300mA LDO regulator
- 8-bit digital interface, plus 4 control lines
- 4-wire resistive touchscreen
- Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, and 3 and analog 4 and 5. Pin 12 is available if not using the microSD
₨2,200
CompareThe 2.4-inch TFT LCD Arduino is a compact and versatile display module designed for use with Arduino boards. This high-resolution color screen provides a vibrant and clear interface, making it ideal for various DIY electronics projects, educational purposes, and prototyping applications. With easy compatibility and a user-friendly interface, this TFT LCD enhances the visual experience of your Arduino projects.
Related products
-
Modules and Motors, Arduino
TF Card U Disk MP3 Format Decoder Board Module Audio Player
TF Card U Disk Decoder Module Specifications:
- Power Supply: DC 3.7V – 5V
- Audio Output: 3.5mm stereo audio jack
- Supported Audio Formats: MP3, WAV, WMA
- Storage Options: TF Card (microSD), USB flash drive
- Control Interface: Onboard buttons for play/pause, stop, volume adjustment, track selection
- Indicator LEDs: Power, playback, mode
- Dimensions: Compact form factor for easy integration into projects
- Operating Temperature: -10°C to 60°C
- Compatibility: Compatible with a wide range of microcontrollers and development boards
SKU: n/a -
Sensors, Arduino, Modules and Motors
DC Voltage Sensor Module for Arduino 0-25V
DC Voltage Sensor Module Arduino Specifications:
- Voltage Range: 0 to 25V DC
- Input Voltage: 5V DC (supplied by Arduino)
- Output Type: Analog Voltage
- Accuracy: ±1%
- Operating Temperature: -10°C to +70°C
- LED Indicator: Yes
- Reverse Polarity Protection: Yes
- Dimensions: (L x W x H) 2.5 cm x 1.5 cm x 0.8 cm
- Weight: 5 grams
- Interface: 3-pin header for easy connection to Arduino
SKU: n/a -
Zigbee Boards
XBEE Module Zigbee (S1/S2)
XBEE Module Features & Specifications:
- Indoor Range up to 100 ft. (30 m) & Outdoor RF line-of-sight Range up to 300 ft. (100 m)
- Interface: Serial(UART) at 1200-115200 bps
- Supply Voltage: 2.8 – 3.4 V
- Transmit Current (typical) 45mA (@ 3.3 V)
- Idle / Receive Current (typical) 50mA (@ 3.3 V)
- Operating Frequency: ISM 2.4 GHz
- Antenna: Whip antenna
- Supported Network Topologies: Point-to-point, Point-to-multipoint & Peer-to-peer
- Number of Channels: (software selectable) 16 Direct Sequence Channels
- Addressing Options: PAN ID, Channel and Addresses
- ADC and I/O line support
- AT and API Command Modes for configuring module parameters
- Extensive command set
- Small form factor
SKU: n/a - Indoor Range up to 100 ft. (30 m) & Outdoor RF line-of-sight Range up to 300 ft. (100 m)
-
Arduino, Modules and Motors
ZMCT103C 5A AC Current Transformer Module
ZMCT103C 5A AC Current Transformer Module Specifications:
- On-board precision micro-current transformer
- On-board high-precision op-amp circuit, to do accurate sampling and appropriate compensation and other functions to signal
- The module can measure AC within 5A, corresponding output analog can be adjusted
- Under ideal conditions, the input voltage VCC is 3-35V, according to the potentiometer (adjust the amplification ratio, amplification range 0-100 times) to adjust the required output voltage, but the output (OUT) of the maximum voltage does not exceed 1 / 2 VCC.
- The output signal is the AC voltage signal, and the output signal voltage does not exceed the maximum 1 / 2VCC.
- PCB board size: 38 (mm) x 18.5 (mm)
SKU: n/a
There are no reviews yet.