LCDs
2.4 Inch TFT LCD For Arduino
2.4 Inch TFT LCD Arduino Specifications:
- 2.4″ diagonal LCD TFT display
- 240×320 resolution
- 5V compatible! Use with 3.3V or 5V logic
- Onboard 3.3V 300mA LDO regulator
- 8-bit digital interface, plus 4 control lines
- 4-wire resistive touchscreen
- Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, and 3 and analog 4 and 5. Pin 12 is available if not using the microSD
₨2,200
CompareThe 2.4-inch TFT LCD Arduino is a compact and versatile display module designed for use with Arduino boards. This high-resolution color screen provides a vibrant and clear interface, making it ideal for various DIY electronics projects, educational purposes, and prototyping applications. With easy compatibility and a user-friendly interface, this TFT LCD enhances the visual experience of your Arduino projects.
Related products
-
Zigbee Boards
XBEE Module Zigbee (S1/S2)
XBEE Module Features & Specifications:
- Indoor Range up to 100 ft. (30 m) & Outdoor RF line-of-sight Range up to 300 ft. (100 m)
- Interface: Serial(UART) at 1200-115200 bps
- Supply Voltage: 2.8 – 3.4 V
- Transmit Current (typical) 45mA (@ 3.3 V)
- Idle / Receive Current (typical) 50mA (@ 3.3 V)
- Operating Frequency: ISM 2.4 GHz
- Antenna: Whip antenna
- Supported Network Topologies: Point-to-point, Point-to-multipoint & Peer-to-peer
- Number of Channels: (software selectable) 16 Direct Sequence Channels
- Addressing Options: PAN ID, Channel and Addresses
- ADC and I/O line support
- AT and API Command Modes for configuring module parameters
- Extensive command set
- Small form factor
SKU: n/a - Indoor Range up to 100 ft. (30 m) & Outdoor RF line-of-sight Range up to 300 ft. (100 m)
-
Sensors, Arduino, Modules and Motors
801S Vibration Shock Sensor For Arduino
801S Vibration Shock Sensor For Arduino Specifications:
- Operating Voltage: 3.3V – 5V DC
- Current Consumption: <1mA
- Output Type:
- Digital Output: High/Low (TTL)
- Analog Output: 0V to Vcc (0 – 5V)
- Detection Range: Adjustable via sensitivity potentiometer
- Frequency Response: 10Hz – 10kHz
- Dimensions: 32mm x 14mm x 7mm
- Mounting Holes: Two mounting holes for easy integration into various projects.
- Operating Temperature: -10°C to +70°C
- Interface: 3-pin interface (VCC, GND, Signal)
- Compatibility: Compatible with Arduino and other microcontrollers with digital and analog input capabilities.
SKU: n/a -
Modules and Motors, Arduino
TF Card U Disk MP3 Format Decoder Board Module Audio Player
TF Card U Disk Decoder Module Specifications:
- Power Supply: DC 3.7V – 5V
- Audio Output: 3.5mm stereo audio jack
- Supported Audio Formats: MP3, WAV, WMA
- Storage Options: TF Card (microSD), USB flash drive
- Control Interface: Onboard buttons for play/pause, stop, volume adjustment, track selection
- Indicator LEDs: Power, playback, mode
- Dimensions: Compact form factor for easy integration into projects
- Operating Temperature: -10°C to 60°C
- Compatibility: Compatible with a wide range of microcontrollers and development boards
SKU: n/a -
Arduino
Arduino Pro Mini 328 3.3V/8MHz
Arduino Pro Mini 328 Specifications:
- ATmega328 running at 8MHz with external resonator (0.5% tolerance)
- Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers, sensors, etc)
- 0.8mm Thin PCB
- USB connection off board
- Weighs less than 2 grams!
- Supports auto-reset
- 3.3V regulator
- Max 150mA output
- Over current protected
- DC input 3.3V up to 12V
- On board Power and Status LEDs
- Analog Pins: 8
- Digital I/Os: 14
- 0.7×1.3″ (18x33mm)
SKU: n/a -
Modules and Motors, Arduino
ZMPT101B 250V AC Voltage Sensor Module For Arduino
Specifications:
- Measure within 250V AC
- Onboard micro-precision voltage transformer
- Analog output corresponding quantity can be adjusted.
- Good consistency, for voltage and power measurement
- Very efficient and accuracy
SKU: n/a
There are no reviews yet.