Sensors, Modules and Motors
BMP280 Pressure Sensor Module
Specifications:
- Pressure Range: 300 hPa to 1100 hPa
- Pressure Accuracy: ±1.0 hPa
- Temperature Range: -40°C to +85°C
- Temperature Accuracy: ±0.5°C
- Digital Interface: I2C and SPI
- Supply Voltage: 1.8V to 3.6V
- Current Consumption: 2.7 µA at 1 Hz measurement rate
- Resolution: 0.01 hPa (Pressure), 0.01°C (Temperature)
- Dimensions: Compact and space-saving design
- Operating Modes: Normal, Forced, and Sleep mode for optimized power consumption
- Calibration Coefficients: Stored in on-chip memory for precise sensor compensation
₨300
CompareFeatures
- The GY-BMP280 module comes with a BMP280 sensor, which is an environmental sensor with temperature, and barometric pressure that is the next generation upgrade to the BMP085/BMP180/BMP183.
- This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI.
- This precision sensor is the best low-cost, precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuracy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude and the pressure measurements are so good, you can also use it as an altimeter with ±1 meter accuracy
- Pin pitch: 2.54mm
- Module size: 11.5mm*15mm
Based on 0 reviews
Be the first to review “BMP280 Pressure Sensor Module”
You must be logged in to post a review.
Related products
-
-
Modules and Motors
RC522 RFID Card Reader
RC522 RFID Card Reader Features and Benefits
- Highly integrated analog circuitry to demodulate and decode responses
- Buffered output drivers for connecting an antenna with the minimum number of external components
- Supports ISO/IEC 14443 A/MIFARE and NTAG
- The typical operating distance in Read/Write mode is up to 50 mm depending on the antenna size and tuning
- Supports MF1xxS20, MF1xxS70 and MF1xxS50 encryption in Read/Write mode
- Supports ISO/IEC 14443 A higher transfer speed communication up to 848 kBd
- Supports MFIN/MFOUT
- Additional internal power supply to the smart card IC connected via MFIN/MFOUT
- Supported host interfaces
- SPI up to 10 Mbit/s
- I 2C-bus interface up to 400 kBd in Fast mode, up to 3400 kBd in High-speed mode
- RS232 Serial UART up to 1228.8 kBd, with voltage levels dependent on the pin voltage supply
- FIFO buffer handles 64-byte send-and-receive
- Flexible interrupt modes
- Hard reset with low power function
- Power-down by software mode
- Programmable timer
- Internal oscillator for connection to 27.12 MHz quartz crystal
- 2.5 V to 3.3 V power supply
- CRC coprocessor
- Programmable I/O pins
- Internal self-test
SKU: n/a -
Modules and Motors
MG996R Servo Motor
MG996R Servo Motor Specifications:
- Weight: 55 g
- Dimensions: Approximately 40.7 x 19.7 x 42.9 mm
- Stall Torque: 9.4 kgf·cm (4.8 V), 11 kgf·cm (6 V)
- Operating Speed: 60° / 0.17s at 4.8V, 60° / 0.14s at 6V
- Operating Voltage: 4.8V – 7.2V
- Current: 500 mA
- Idle Current: 2.5 A (6V)
- Deadband Width: 5 µs
- Stable and shock-resistant dual ball bearing design
- Temperature Range: 0°C – 55°C
SKU: n/a -
Modules and Motors
PL2303 USB To TTL RS232 Converter Adapter Module
PL2303 USB To TTL Converter RS232 Specifications:
- Chipset: PL2303
- Interface: USB 2.0
- Voltage Levels: 3.3V or 5V selectable
- Indicators: Power and data transmission LEDs
- Compatibility: Windows, Linux, macOS
- Dimensions: Compact form factor for easy integration
- Driver Support: Included for easy installation
- Applications: Programming, debugging, and interfacing with microcontrollers and Arduino boards
SKU: n/a -
There are no reviews yet.