DC Voltage Sensor Module for Arduino 0-25V
DC Voltage Sensor Module Arduino Specifications:
- Voltage Range: 0 to 25V DC
- Input Voltage: 5V DC (supplied by Arduino)
- Output Type: Analog Voltage
- Accuracy: ±1%
- Operating Temperature: -10°C to +70°C
- LED Indicator: Yes
- Reverse Polarity Protection: Yes
- Dimensions: (L x W x H) 2.5 cm x 1.5 cm x 0.8 cm
- Weight: 5 grams
- Interface: 3-pin header for easy connection to Arduino
₨70 ₨100
The DC Voltage Sensor Module Arduino 0V-25V is a versatile and precise electronic component designed to seamlessly integrate with Arduino projects. This sensor module enables real-time monitoring of DC voltage levels in the range of 0 to 25V, providing essential data for various applications, including power supply monitoring, battery level tracking, and voltage-controlled systems.
The DC Voltage Sensor Module Arduino 0V-25V is a versatile and precise electronic component designed to seamlessly integrate with Arduino projects. This sensor module enables real-time monitoring of DC voltage levels in the range of 0 to 25V, providing essential data for various applications, including power supply monitoring, battery level tracking, and voltage-controlled systems.
Based on 0 reviews
Be the first to review “DC Voltage Sensor Module for Arduino 0-25V”
You must be logged in to post a review.
Related products
-
Sensors, Arduino
ACS712 5A Range Current Sensor
ACS712 5A Range Current Sensor Specifications:
- Current Range: 0A to 5A
- Supply Voltage: 4.5V to 5.5V
- Sensitivity: 185mV/A
- Output Voltage at No Current: VCC/2
- Output Voltage at Full Current: VCC/2 ± (5%)
- Operating Temperature Range: -40°C to 85°C
- Output Voltage Offset: 2.5V (typical)
- Output Noise: 5 mV (rms, typical)
- Response Time: 5 μs (typical)
- Isolation Voltage: 2.1 kV RMS
- Dimensions: Compact form factor for easy integration
- Mounting Holes: Facilitates secure installation in various environments.
Â
SKU: n/a -
Sensors, Arduino, Modules and Motors
801S Vibration Shock Sensor For Arduino
801S Vibration Shock Sensor For Arduino Specifications:
- Operating Voltage: 3.3V – 5V DC
- Current Consumption: <1mA
- Output Type:
- Digital Output: High/Low (TTL)
- Analog Output: 0V to Vcc (0 – 5V)
- Detection Range: Adjustable via sensitivity potentiometer
- Frequency Response: 10Hz – 10kHz
- Dimensions: 32mm x 14mm x 7mm
- Mounting Holes: Two mounting holes for easy integration into various projects.
- Operating Temperature: -10°C to +70°C
- Interface: 3-pin interface (VCC, GND, Signal)
- Compatibility: Compatible with Arduino and other microcontrollers with digital and analog input capabilities.
SKU: n/a -
Arduino
Arduino Uno R3
Arduino Uno R3 board Specifications:
- It is an ATmega328P based Microcontroller
- The Operating Voltage of the Arduino is 5V
- The recommended input voltage ranges from 7V to 12V
- The i/p voltage (limit) is 6V to 20V
- Digital input and output pins 14
- Digital input & output pins (PWM)-6
- Analog i/p pins are 6
- DC Current for each I/O Pin is 20 mA
- DC Current used for 3.3V Pin is 50 mA
- Flash Memory -32 KB, and 0.5 KB memory is used by the boot loader
- SRAM is 2 KB
- EEPROM is 1 KB
- The speed of the CLK is 16 MHz
- In Built LED
- The length and width of the Arduino are 68.6 mm X 53.4 mm
- The weight of the Arduino board is 25 g
SKU: n/a -
Modules and Motors, Arduino
ZMPT101B 250V AC Voltage Sensor Module For Arduino
Specifications:
- Measure within 250V AC
- Onboard micro-precision voltage transformer
- Analog output corresponding quantity can be adjusted.
- Good consistency, for voltage and power measurement
- Very efficient and accuracy
SKU: n/a -
Modules and Motors, Arduino
TF Card U Disk MP3 Format Decoder Board Module Audio Player
TF Card U Disk Decoder Module Specifications:
- Power Supply: DC 3.7V – 5V
- Audio Output: 3.5mm stereo audio jack
- Supported Audio Formats: MP3, WAV, WMA
- Storage Options: TF Card (microSD), USB flash drive
- Control Interface: Onboard buttons for play/pause, stop, volume adjustment, track selection
- Indicator LEDs: Power, playback, mode
- Dimensions: Compact form factor for easy integration into projects
- Operating Temperature: -10°C to 60°C
- Compatibility: Compatible with a wide range of microcontrollers and development boards
SKU: n/a
There are no reviews yet.