WeMos D1 Wifi Mini ESP32 Wifi+Bluetooth Module
ESP32 D1 Mini Wifi Bluetooth Module Specifications:
- Processor: Dual-core Tensilica LX6
- Clock Frequency: Up to 240MHz
- Flash Memory: 4MB
- Wi-Fi Standards: 802.11b/g/n
- Bluetooth Version: Bluetooth 4.2 BLE
- GPIO Pins: 22
- Analog Input Pins: 6
- Operating Voltage: 3.3V
- Dimensions: 34.2mm x 25.6mm
- Weight: 4g (approx.)
₨1,480 ₨1,500
The WeMos ESP32 D1 Mini Wifi Bluetooth Module is a versatile and compact development board that integrates the power of the ESP32 chipset, offering both Wi-Fi and Bluetooth connectivity. Designed for easy prototyping and development, this module is a favorite among IoT enthusiasts, hobbyists, and engineers. With its small form factor and rich set of features, the WeMos ESP32 D1 Mini is ideal for a wide range of applications, from home automation to sensor networks.
The WeMos ESP32 D1 Mini Wifi Bluetooth Module is a versatile and compact development board that integrates the power of the ESP32 chipset, offering both Wi-Fi and Bluetooth connectivity. Designed for easy prototyping and development, this module is a favorite among IoT enthusiasts, hobbyists, and engineers. With its small form factor and rich set of features, the WeMos ESP32 D1 Mini is ideal for a wide range of applications, from home automation to sensor networks.
wemos d1 mini price in pakistan
“>
Based on 0 reviews
Be the first to review “WeMos D1 Wifi Mini ESP32 Wifi+Bluetooth Module”
You must be logged in to post a review.
Related products
-
Modules and Motors
RC522 RFID Card Reader
RC522 RFID Card Reader Features and Benefits
- Highly integrated analog circuitry to demodulate and decode responses
- Buffered output drivers for connecting an antenna with the minimum number of external components
- Supports ISO/IEC 14443 A/MIFARE and NTAG
- The typical operating distance in Read/Write mode is up to 50 mm depending on the antenna size and tuning
- Supports MF1xxS20, MF1xxS70 and MF1xxS50 encryption in Read/Write mode
- Supports ISO/IEC 14443 A higher transfer speed communication up to 848 kBd
- Supports MFIN/MFOUT
- Additional internal power supply to the smart card IC connected via MFIN/MFOUT
- Supported host interfaces
- SPI up to 10 Mbit/s
- I 2C-bus interface up to 400 kBd in Fast mode, up to 3400 kBd in High-speed mode
- RS232 Serial UART up to 1228.8 kBd, with voltage levels dependent on the pin voltage supply
- FIFO buffer handles 64-byte send-and-receive
- Flexible interrupt modes
- Hard reset with low power function
- Power-down by software mode
- Programmable timer
- Internal oscillator for connection to 27.12 MHz quartz crystal
- 2.5 V to 3.3 V power supply
- CRC coprocessor
- Programmable I/O pins
- Internal self-test
SKU: n/a -
Modules and Motors
L298N Motor Driver H-Bridge
Features & Specifications
- Driver Model: L298N 2A
- Driver Chip: Double H Bridge L298N
- Motor Supply Voltage (Maximum): 46V
- Motor Supply Current (Maximum): 2A
- Logic Voltage: 5V
- Driver Voltage: 5-35V
- Driver Current:2A
- Logical Current:0-36mA
- Maximum Power (W): 25W
- Current Sense for each motor
- Heatsink for better performance
- Power-On LED indicator
SKU: n/a -
Modules and Motors
ESP-01 ESP8266 WiFi Module
ESP 01 WiFi Module ESP8266 Features
- 802.11 b/g/n protocol
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, and power management units
- +19.5dBm output power in 802.11b mode
- Integrated temperature sensor
- Supports antenna diversity
- Power down leakage current of < 10uA
- Integrated low power 32-bit CPU could be used as application processor
- SDIO 2.0, SPI, UART
- STBC, 1×1 MIMO, 2×1 MIMO
- A-MPDU & A-MSDU aggregation & 0.4s guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
SKU: ESP-01-ESP8266-WiFi-Module -
-
There are no reviews yet.