EUP3482 SOP
FEATURES
2A Output Current
220ns Minimum On Time
35V Input Surge Protection
Integrated 160mΩ/110mΩ DMOS Switches
4.5V to 30V Input Operating Range
Output Adjustable from 0.923V to 20V
Up to 95% Efficiency
1µA Shutdown Current
Fixed 340KHz Frequency
Programmable Soft-Start
Thermal Shutdown and Overcurrent Protection
Input Supply Overvoltage and Undervoltage
Lockout
Available in SOP-8 Package
₨200
CompareThe EUP3482 SOP is a synchronous current mode buck regulator capable of driving 2A continuous load current with excellent line and load regulation. The EUP3482 can operate with an input range 4.5V to 30V and the output can be externally set from 0.923V to 20V with a resistor divider.
Fault condition protection includes cycle-by-cycle current limiting and thermal shutdown. In shutdown mode the regulator draws 1µA of supply current. Programmable soft-start minimizes the inrush supply current and the output overshoot at initial startup.
EUP3482 SOP Price in Pakistan
Related products
-
IC and IC Sockets
LM393 SOP-8 IC
LM393 SOP-8 IC Features:
- Wide Single-Supply Range: 2.0 Vdc to 36 Vdc
- Split-Supply Range: ±1.0 Vdc to ±18 Vdc
- Very Low Current Drain Independent of Supply Voltage: 0.4 mA
- Low Input Bias Current: 25 nA
- Low Input Offset Current: 5.0 nA
- Low Input Offset Voltage: 5.0 mV (max) LM293/393
- Input Common Mode Range to Ground Level
- Differential Input Voltage Range Equal to Power Supply Voltage
- Output Voltage Compatible with DTL, ECL, TTL, MOS, and CMOS Logic Levels
- ESD Clamps on the Inputs Increase the Ruggedness of the Device without Affecting Performance
- NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q100
- Qualified and PPAP Capable
- These Devices are Pb-Free, Halogen Free/BFR Free and RoHS Compliant
SKU: n/a -
IC and IC Sockets
74HC4067D SOP-24 IC
74HC4067D SOP-24 IC Features
- Wide supply voltage range from 2.0 V to 10.0 V
- Input levels S0, S1, S2, S3 and E inputs:
- For 74HC4067: CMOS level
- CMOS low power dissipation
- High noise immunity
- Low ON resistance:
- 80 Ω (typical) at VCC = 4.5 V
- 70 Ω (typical) at VCC = 6.0 V
- 60 Ω (typical) at VCC = 9.0 V
- Complies with JEDEC standards:
- JESD8C (2.7 V to 3.6 V)
- JESD7A (2.0 V to 6.0 V)
- Latch-up performance exceeds 100 mA per JESD 78 Class II Level B
SKU: n/a -
IC and IC Sockets
5815M RDA5815M QFN-20 Signal IC
5815M IC RDA5815M QFN-20 Signal IC Specifications:
- Single-chip RF-to-baseband Satellite receiver
- CMOS Fully integrated RF front end
- Low noise and wide dynamic range zero-IF receiver
- Input frequency range: 250 to 2300 MHz
- Input signal level: -100 to 5 dBm
- More than 85dB gain control range
- Fully integrated PLL (dividers, charge pump, phase & frequency detectors, loop filters, etc.)
- Integrated RX VCO
- Integrated baseband LPF with selectable cut-off Applications frequency from 4MHz to 40MHz with 1MHz step
- Integrated LNA with RF AGC Integrated reference oscillator (27MHz is the default)
- I2C bus interface
- Automatic gain control
- 0.11μm RF CMOS technology
- 3V to 3.6V operation
- power consumption less than 600mW
- Lower profile packages:
- RDA5815M 5×5 mm QFN32 Pin assignment (32 pin QFN 5×5 mm)
- Set-top boxes
- Digital video recorders
- Digital television
- Satellite PC-TV
SKU: n/a -
IC and IC Sockets
74HC273 SMD SOP-20 IC
74HC273 SMD SOP-20 IC Features:
- Wide Operating Voltage Range of 2 V to 6 V
- Outputs Can Drive Up to 10 LSTTL Loads
- Low Power Consumption, 80-µA Maximum ICC
- Typical tpd = 12 ns
- ±4-mA Output Drive at 5 V
- Low Input Current of 1-µA Maximum
- Contain Eight Flip-Flops With Single-Rail Outputs
- Direct Clear Input
SKU: n/a
