Modules and Motors
Flex Sensor 2.2 Inch
Availability:
75 in stock
Flex Sensor 2.2 inch Product Specification
- Type Flex Sensor
- Sensor Type Bend Sensor
- Power Consumption 240 V
- Weight G 20 Gram
- Flat Resistance 10K Ohms +-30%.
- Power Rating 0.5 Watts.
- Bend Resistance Minimum 20k Ohms +-30% (@ 180 Degree Pinch Bend)
- Height 0.43mm (0.017″)
- Total Length 2.2″ (7 cm).
- Size 2.2 Inches
- Flex length 5.6 cm.
- Application Hand Gesture Recognition
- Life Cycle >1 million.
₨1,600
75 in stock
CompareA simple flex sensor 2.2 inch in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol – they claim these sensors were used in the original Nintendo Power Glove. I love the Nintendo Power Glove.
The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on the inside of the bend).
The connector is 0.1″ spaced and breadboard friendly.
Based on 0 reviews
Be the first to review “Flex Sensor 2.2 Inch”
You must be logged in to post a review.
Related products
-
-
Modules and Motors
RC522 RFID Card Reader
RC522 RFID Card Reader Features and Benefits
- Highly integrated analog circuitry to demodulate and decode responses
- Buffered output drivers for connecting an antenna with the minimum number of external components
- Supports ISO/IEC 14443 A/MIFARE and NTAG
- The typical operating distance in Read/Write mode is up to 50 mm depending on the antenna size and tuning
- Supports MF1xxS20, MF1xxS70 and MF1xxS50 encryption in Read/Write mode
- Supports ISO/IEC 14443 A higher transfer speed communication up to 848 kBd
- Supports MFIN/MFOUT
- Additional internal power supply to the smart card IC connected via MFIN/MFOUT
- Supported host interfaces
- SPI up to 10 Mbit/s
- I 2C-bus interface up to 400 kBd in Fast mode, up to 3400 kBd in High-speed mode
- RS232 Serial UART up to 1228.8 kBd, with voltage levels dependent on the pin voltage supply
- FIFO buffer handles 64-byte send-and-receive
- Flexible interrupt modes
- Hard reset with low power function
- Power-down by software mode
- Programmable timer
- Internal oscillator for connection to 27.12 MHz quartz crystal
- 2.5 V to 3.3 V power supply
- CRC coprocessor
- Programmable I/O pins
- Internal self-test
SKU: n/a -
-
Modules and Motors
MG946R Servo Motor
MG946R Servo Motor Features:Â
- Power: 4.8V – 6V DC max (5V works well)
- Average Speed: 60 degrees in 0.20 sec (@ 4.8V), 60 degrees in 0.16 sec (@ 6.0V)
- Weight: 62.41g
- Torque: At 4.8V: 8.5 kg-cm / 120 oz-in, and at 6V: 10 kg-cm / 140 oz-in.
- Size mm: (L x W x H) 40.7 x 19.7 x 42.9
SKU: n/a -
There are no reviews yet.