MOSFETs, IGBTs and BJTs
IR2153 IC DIP8 MOSFET Driver
IR2153 IC Features
- Integrated 600 V half-bridge gate driver
- 15.6 V zener clamp on VCC
- True micropower start-up
- Tighter initial deadtime control
- Low temperature coefficient deadtime
- Shutdown feature (1/6th Vcc) on CT pin
- Increased undervoltage lockout Hysteresis (1 V)
- Lower power level-shifting circuit
- Constant LO, HO pulse widths at startup
- Lower di/dt gate driver for better noise immunity
- Low side output in phase with RT
- Excellent latch immunity on all inputs and outputs
- ESd protection on all leads
₨180
CompareThe IR2153 IC is an improved version of the popular IR2155 and IR2151 gate driver ICs and incorporates a high voltage half-bridge gate driver with a front 8 Lead SOIC 8 Lead PDIP end oscillator similar to the industry standard CMOS 555 timer.
The IR2153 provides more functionality and is easier to use than previous ICs. A shutdown feature has been designed into the CT pin so that both gate driver outputs can be disabled using a low-voltage control signal.
In addition, the gate driver output pulse widths are the same once the rising Undervoltage lockout threshold on VCC has been reached, resulting in a more stable profile of frequency vs time at startup.
IR2153 IC in pakistan
Related products
-
MOSFETs, IGBTs and BJTs
IR2103 IC DIP8 IR2103S SOP8 Driver
Features- Floating channel designed for bootstrap operation
- Fully operational to +600 V
- Tolerant to negative transient voltage
- dV/dt immune
- Gate drive supply range from 10 to 20 V
- Undervoltage lockout
- 3.3 V, 5 V, and 15 V logic input compatible
- Cross-conduction prevention logic
- Matched propagation delay for both channels
- Internal set deadtime
- High side output in phase with HIN input
- Low side output out of phase with LIN input
SKU: n/a -
ICs and Optocouplers, MOSFETs, IGBTs and BJTs
TLP352 IC DIP8 TLP352S SOP8 Driver
Features:
- Buffer logic type (totem pole output)
- Output peak current: ±2.5 A (max)
- Operating temperature: -40 to 125 C
- Supply current: 3.0 mA (max)
- Supply voltage: 15 to 30 V
- Threshold input current: 5 mA (max)
- Propagation delay time: 200 ns (max)
- Common-mode transient immunity: ±20 kV/µs (min)
- Isolation voltage: 3750 Vrms (min)
- Safety standards
- UL-approved: UL1577, File No.E67349
- cUL-approved: CSA Component Acceptance Service No.5A File No.E67349
- VDE-approved: EN60747-5-5
SKU: n/a -
MOSFETs, IGBTs and BJTs
IR2104 IC DIP8 IR2104S SOP8 Driver
Features and Specifications
- Floating channel designed for bootstrap operation
- Fully operational to +600V
- Tolerant to negative transient voltage
- dV/dt immune
- Gate drive supply ranges from 10 to 20V
- Undervoltage lockout
- 3.3V, 5V, and 15V input logic compatible
- Cross-conduction prevention logic
- Internally set deadtime
- High-side output in phase with the input
- Shut down input turns off both channels
- Matched propagation delay for both channels
SKU: n/a -
MOSFETs, IGBTs and BJTs
IR2110 IC DIP14 IR2110S SOP16 Driver
IR2110 IC/IR2110S IC Features- Floating channel designed for bootstrap operation
- Fully operational to +500 V
- Fully operational to +600 V version available (IR2113)
- dV/dt immune
- Gate drive supply ranges from 10 to 20 V
- Undervoltage lockout for both channels
- 3.3 V logic compatible
- Separate logic supply range from 3.3 V to 20 V
- Logic and power ground + /- 5 V offset
- CMOS Schmitt-triggered inputs with pull-down
- Cycle-by-cycle edge-triggered shutdown logic
- Matched propagation delay for both channels
- Outputs in phase with inputs
SKU: n/a
