MQ2 Gas Sensor module is useful for gas leakage detection (home and industry). It is suitable for detecting H2, LPG, CH4, CO, Alcohol, Smoke or Propane. Due to its high sensitivity and fast response time, measurements can be taken as soon as possible. The sensitivity of the sensor can be adjusted by a potentiometer.
The MQ2 is a heater-driven sensor. It is therefore covered with two layers of fine stainless steel mesh known as an “anti-explosion network”. It ensures that the heater element inside the sensor does not cause an explosion because we are sensing flammable gasses.
Based on 0 reviews
Be the first to review “MQ-2 Gas Sensor”
You must be logged in to post a review.
Related products
-
Sensors
Fire Sensor Module
Fire Sensor Module Features :- High Photo Sensitivity
- Fast Response Time
- Sensitivity adjustable
- Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm.
- Detection range: up to 100 cm.
- Adjustable detection range.
- Detection angle about 60 degrees, it is sensitive to the flame spectrum.
- Comparator chip LM393 makes module readings stable.
- Operating voltage 3.3V-5V.
- Digital and Analog Output.
- Power indicator and digital switch output indicator.
SKU: n/a -
Sensors
Water Level Sensor
Water Level Sensor Applications
- Flood and spill alarms.
- Rain barrel monitoring.
- Reservoir monitoring.
- Environmental monitoring.
- Water conservation applications.
- Mechanical float replacement.
- Electronic toilets.
- Aquaponics.
- Monitoring of Aquariums.
- Sensor for Internet of Things.
SKU: n/a -
Sensors
TCS3200 Color Sensor for Arduino
TCS3200 Color Sensor Specifications
- Single-Supply Operation (2.7 V to 5.5 V)
- High-Resolution Conversion of Light Intensity to Frequency
- Programmable Color and Full-Scale Output Frequency
- Power Down Feature
- Communicates Directly to Micro-controller
- S0~S1: Output frequency scaling selection inputs
- S2~S3: Photo-diode type selection inputs
- OUT Pin: Output frequency
- OE Pin: Output frequency enable pin (active low), can be impending when using
- Support LED lamp light supplement control
- Size: 28.4 x 28.4 mm
SKU: n/a -
Sensors
MQ-3 Alcohol Gas Sensor
MQ3 Alcohol Gas Sensor Specifications and Features:
- Model No.: MQ-3
- Dimensions: 36 x 20 x 21 mm (LxWxH)
- Weight: 6gm
- Heater voltage: 5±0.2V (AC•DC)
- Loop voltage: ≤24V (DC)
- Load resistance: Adjustable
- Heating Resistance: 31Ω±3Ω (Room temperature)
- Heating Power: ≤ 900mW
- Surface thermal resistance: 2Kohm-20Kohm (0.4mg/L alcohol)
- Sensitivity: Rs (in the air)/Rs (0.4mg/L alcohol) ≥ 5
- Working temperature: 20 degrees ±2 degree
- Humidity: 65%±5%RH
- Signal output light indicator.
- Analog and level signal output.
- TTL output valid signal is low. (When the output low signal light can be directly connected microcontroller or relay module).
- The carbon monoxide detection with better sensitivity.
- Has a long service life and reliable stability.
- Rapid response recovery features.
SKU: n/a -
Sensors
DHT21 Sensor Temperature and Humidity Module
DHT21 Sensor Specification:
- Model: AM2301
- Power supply: 3.3-5V DC
- Output signal: digital signal via single-bus
- Sensing element: Polymer humidity capacitor
- Measuring range: humidity 0-100%RH; temperature -40~80Celsius
- Accuracy: humidity +-3%RH(Max +-5%RH); temperature <+-1Celsius
- Resolution or sensitivity: humidity 0.1%RH; temperature 0.1Celsius
- Repeatability: humidity +-1%RH; temperature +-0.2Celsius
- Humidity hysteresis: +-0.3%RH
- Long-term Stability: +-0.5%RH/year
- Sensing period: Average: 2s
- Dimensions size 59*27*13.5mm
SKU: dht21-sensor
There are no reviews yet.