TTP229 Touch Keypad 16 Keys Capacitive Module 4×4
TTP229 Touch Keypad Specifications:
- Operating Voltage: 2.4V to 5.5V
- Operating Current: <2uA (standby), <16mA (active)
- 16 Touch Keys: Arranged in a 4×4 matrix
- Output Interface: I2C or Serial communication
- Adjustable Sensitivity: Yes
- Response Time: <60ms
- Dimensions: Approximately [insert dimensions]
- Mounting Holes: Yes
- Operating Temperature: -20°C to 70°C
- Storage Temperature: -40°C to 125°C
₨300
CompareThe TTP229 Touch Keypad 16 Keys Capacitive Module 4×4 is a versatile and user-friendly input device designed for electronic projects requiring a reliable and responsive touch interface. This module utilizes advanced capacitive touch technology to detect touch on its 16 keys, providing a seamless and intuitive way to interact with your electronic devices.
The TTP229 Touch Keypad 16 Keys Capacitive Module 4×4 is a versatile and user-friendly input device designed for electronic projects requiring a reliable and responsive touch interface. This module utilizes advanced capacitive touch technology to detect touch on its 16 keys, providing a seamless and intuitive way to interact with your electronic devices.
Based on 0 reviews
Be the first to review “TTP229 Touch Keypad 16 Keys Capacitive Module 4×4”
You must be logged in to post a review.
Related products
-
-
Modules and Motors
L298N Motor Driver H-Bridge
Features & Specifications
- Driver Model: L298N 2A
- Driver Chip: Double H Bridge L298N
- Motor Supply Voltage (Maximum): 46V
- Motor Supply Current (Maximum): 2A
- Logic Voltage: 5V
- Driver Voltage: 5-35V
- Driver Current:2A
- Logical Current:0-36mA
- Maximum Power (W): 25W
- Current Sense for each motor
- Heatsink for better performance
- Power-On LED indicator
SKU: n/a -
-
Modules and Motors
MG946R Servo Motor
MG946R Servo Motor Features:
- Power: 4.8V – 6V DC max (5V works well)
- Average Speed: 60 degrees in 0.20 sec (@ 4.8V), 60 degrees in 0.16 sec (@ 6.0V)
- Weight: 62.41g
- Torque: At 4.8V: 8.5 kg-cm / 120 oz-in, and at 6V: 10 kg-cm / 140 oz-in.
- Size mm: (L x W x H) 40.7 x 19.7 x 42.9
SKU: n/a -
Modules and Motors
RC522 RFID Card Reader
RC522 RFID Card Reader Features and Benefits
- Highly integrated analog circuitry to demodulate and decode responses
- Buffered output drivers for connecting an antenna with the minimum number of external components
- Supports ISO/IEC 14443 A/MIFARE and NTAG
- The typical operating distance in Read/Write mode is up to 50 mm depending on the antenna size and tuning
- Supports MF1xxS20, MF1xxS70 and MF1xxS50 encryption in Read/Write mode
- Supports ISO/IEC 14443 A higher transfer speed communication up to 848 kBd
- Supports MFIN/MFOUT
- Additional internal power supply to the smart card IC connected via MFIN/MFOUT
- Supported host interfaces
- SPI up to 10 Mbit/s
- I 2C-bus interface up to 400 kBd in Fast mode, up to 3400 kBd in High-speed mode
- RS232 Serial UART up to 1228.8 kBd, with voltage levels dependent on the pin voltage supply
- FIFO buffer handles 64-byte send-and-receive
- Flexible interrupt modes
- Hard reset with low power function
- Power-down by software mode
- Programmable timer
- Internal oscillator for connection to 27.12 MHz quartz crystal
- 2.5 V to 3.3 V power supply
- CRC coprocessor
- Programmable I/O pins
- Internal self-test
SKU: n/a
There are no reviews yet.