Modules and Motors
Showing 121–134 of 134 results
-
-
Modules and Motors
VS838 IR Infrared Receiver Module
VS838 Infrared Receiver Module IR Features
- Product Name: Infrared Remote Control Receiver Module;
- Model Number: VS838;
- Working Voltage:2.7V to 5.5V
- Distance: 15M;
- : +/- 45 Degree;
- Low Level Voltage : 0.4V;High Level Voltage : 4.5V;
- Body Size : 7 x 6 x 5.4mm / 0.27″x 0.23″ x 0.21″(L*W*T);
- Pin Length:22mm / 0.87″
- Pitch: 2mm / 0.08″
- Material: Plastic, Alloy;
- Color: Black, Silver Tone
- Weight: 5g
SKU: n/a -
Modules and Motors
W1209 DC 12V Heat Cool Thermostat Temperature Control Switch Sensor
Specifications:
- Temperature range :-50-110 ?
- Dimensions: 48.5 * 40mm
- Temperature control mode: ON / OFF
- Resolution:When temperature is 0.1?, the resolution is -9.9~99.9, other temperature segment is 1?
- Control accuracy: 0.1 ?
- Hysteresis accuracy: 0.1?
- Refresh rate: 0.5S
- High temperature protection: 0-110?
- Supply voltage: DC 12V
- Static current: �35MA, attract current �65MA
- Output voltage: DC 12V
- Output power: 20A relay
- Measurement input: NTC (10K 0.5%) Waterproof Sensor
- Environmental requirements: -10 ~ 60 â„?,Humidity 20% -85%
SKU: n/a -
Modules and Motors
W1209 LED Digital Thermostat Temperature Control Module
Specifications
- Temperature control range: -50 ℃ -110 ℃
- Temperature measurement accuracy: 0.1 ℃
- Temperature input: NTC (10K 0.5%) waterproof temperature sensor
- Temperature input: one channel 20A relay
- Backlash accuracy: 0.1 ℃
- High-temperature protection: 0-110 ℃
SKU: n/a -
Modules and Motors, Arduino
W5100 Ethernet Network Module Mini For Arduino
W5100 Ethernet Network Module Specifications:
- Controller: Wiznet W5100
- Interface: SPI (Serial Peripheral Interface)
- Ethernet Speeds: 10Base-T and 100Base-TX
- MicroSD Card Slot: Yes
- Power Supply: 3.3V (via Arduino) or external power source
- Power Consumption: Low power consumption for energy-efficient operation
- Dimensions: Compact form factor for space-efficient integration
- Status LEDs: Power, Link, Full Duplex, and Speed
- Operating Temperature: -40°C to 85°C
SKU: n/a -
Modules and Motors
W5500 Ethernet Module
W5500 Ethernet Module Features
- Supports following Hardwired TCP/IP Protocols: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
- Supports 8 independent sockets simultaneously
- Supports Power down mode
- Supports Wake on LAN over UDP
- Supports High Speed Serial Peripheral Interface(SPI MODE 0, 3)
- Internal 32Kbytes Memory for Tx/Rx Buffers
- 10BaseT/100BaseTX Ethernet PHY embedded
- Support Auto Negotiation (Full and half duplex, 10 and 100-based)
- Not support IP Fragmentation
- 3.3V operation with 5V I/O signal tolerance
- LED outputs (Full/Half duplex, Link, Speed, Active)
SKU: n/a -
Modules and Motors
WeMos D1 Wifi Mini ESP32 Wifi+Bluetooth Module
ESP32 D1 Mini Wifi Bluetooth Module Specifications:
- Processor: Dual-core Tensilica LX6
- Clock Frequency: Up to 240MHz
- Flash Memory: 4MB
- Wi-Fi Standards: 802.11b/g/n
- Bluetooth Version: Bluetooth 4.2 BLE
- GPIO Pins: 22
- Analog Input Pins: 6
- Operating Voltage: 3.3V
- Dimensions: 34.2mm x 25.6mm
- Weight: 4g (approx.)
SKU: n/a -
Modules and Motors
WROOM ESP32 Wifi Microcontroller Development Board
Specifications
- WIFI module: ESP-WROOM-32
- Processor: ESP32-D0WDQ6
- Built-in Flash: 32Mbit
- Antenna: Onboard PCB antenna
- Peripheral interface: UART/GPIO/ADC/DAC/SDIO/PWM/I2C/I2S
- WiFi protocol: IEEE 802.11 b/g/n
- Bluetooth: Bluetooth 4.2
- Frequency range: 2.4G ~ 2.5G (2400M ~ 2483.5M)
- WIFI mode: Station / SoftAP / SoftAP+Station
- Power supply: 5V
- Logic level: 3.3V
- Dimensions: 48.26mm x 25.4mm
SKU: n/a - WIFI module: ESP-WROOM-32
-
Modules and Motors
WTV020SD-16P MP3 Music Module for Arduino
WTV020SD 16P MP3 Music Module Specifications:
- Voltage Input: 3.3V – 5V
- Current Consumption: <50mA
- Audio Output: 16-bit DAC
- Supported Audio Format: MP3
- Storage: MicroSD card slot (supports up to 32GB)
- Control Interface: UART (Universal Asynchronous Receiver-Transmitter)
- GPIO Pins: Yes, for external triggers
- Volume Control: Yes, Adjustable
- Dimensions: (L x W x H) 29mm x 21mm x 4mm
- Weight: <5g
SKU: n/a -
Modules and Motors
XL4015 5A DC-DC Step Down Adjustable Power Supply Module Buck Converter
XL4015 5A DC Power Supply Module Buck Converter Specification
- Input voltage range:5-36VDC
- Output voltage range:1.25-32VDC adjustable
- Output current: 0-5A
- Output power: 75W
- High efficiency up to 96%
- Built in thermal shutdown function
- Built in current limit function
- Built in output short protection function
- Input reverse polarity protection
SKU: n/a -
Modules and Motors
XL6009 LM2596S Boost Voltage Power Converter Module
XL6009 LM2596S Boost Voltage Power Converter Module Specifications:
- Input voltage: 4V-35V (Please note that the input voltage must be 1.5V above the output voltage)
- Input Current: 3A (maximum)
- Output voltage: 1.23V to 30V
- Switching frequency: 150kHz Load regulation: +- 5%
- Working temperature: -40C to +85C
- Rectification mode: non-synchronous rectification
- Conversion efficiency: 92%
- Output ripple: 30mA (maximum)
- Voltage regulation: +- 2.5%
- Features:
Brand new and high quality. - Input: 3.5-28V.
- Output: 1.25V-26V.
- Output voltage independent of input voltage (3.5V-28V input, any value output 1.25V-26V).
- Maximum input current 3A.
- Maximum output 3A.
- Rated input 1A, Output 1A
SKU: n/a -
Arduino, Modules and Motors
ZMCT103C 5A AC Current Transformer Module
ZMCT103C 5A AC Current Transformer Module Specifications:
- On-board precision micro-current transformer
- On-board high-precision op-amp circuit, to do accurate sampling and appropriate compensation and other functions to signal
- The module can measure AC within 5A, corresponding output analog can be adjusted
- Under ideal conditions, the input voltage VCC is 3-35V, according to the potentiometer (adjust the amplification ratio, amplification range 0-100 times) to adjust the required output voltage, but the output (OUT) of the maximum voltage does not exceed 1 / 2 VCC.
- The output signal is the AC voltage signal, and the output signal voltage does not exceed the maximum 1 / 2VCC.
- PCB board size: 38 (mm) x 18.5 (mm)
SKU: n/a -
Sensors, Modules and Motors
ZMCT103C 5A Range Single-Phase AC Current Transformer Sensor Module
ZMCT103C 5A Range Single-Phase AC Current Transformer Sensor Module Features :
- Onboard precision microcurrent transformer.
- Onboard sampling resistor.
- The module can measure AC currents less than 5A, the corresponding analog output 5A/5mA.
- Rated input current: 5A
- Rated output current: 5mA
- Change: 1000: 1
- The linear range: 0 ~ 10A (100 ohms)
- Linearity: 0.2%
SKU: n/a -
Modules and Motors, Arduino
ZMPT101B 250V AC Voltage Sensor Module For Arduino
Specifications:
- Measure within 250V AC
- Onboard micro-precision voltage transformer
- Analog output corresponding quantity can be adjusted.
- Good consistency, for voltage and power measurement
- Very efficient and accuracy
SKU: n/a
