Arduino
Showing 1–15 of 30 results
-
LCDs
0.96 Inch 4-pin Blue IIC I2C OLED Display Module 12864
0.96 Inch OLED Display Module 12864 4-pin Blue IIC I2C Specifications:
- OLED Driver IC: SSD1306
- Resolution: 128 x 64
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Compatible I/O Level: 3.3V, 5V
- Mini Size: 2.7 x 2.8cm
- Only Need 2 I/O Port to Control
- Full Compatible Arduino, 51
SKU: n/a -
LCDs
2.4 Inch TFT LCD For Arduino
2.4 Inch TFT LCD Arduino Specifications:
- 2.4″ diagonal LCD TFT display
- 240×320 resolution
- 5V compatible! Use with 3.3V or 5V logic
- Onboard 3.3V 300mA LDO regulator
- 8-bit digital interface, plus 4 control lines
- 4-wire resistive touchscreen
- Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, and 3 and analog 4 and 5. Pin 12 is available if not using the microSD
SKU: n/a -
Sensors, Arduino, Modules and Motors
801S Vibration Shock Sensor For Arduino
801S Vibration Shock Sensor For Arduino Specifications:
- Operating Voltage: 3.3V – 5V DC
- Current Consumption: <1mA
- Output Type:
- Digital Output: High/Low (TTL)
- Analog Output: 0V to Vcc (0 – 5V)
- Detection Range: Adjustable via sensitivity potentiometer
- Frequency Response: 10Hz – 10kHz
- Dimensions: 32mm x 14mm x 7mm
- Mounting Holes: Two mounting holes for easy integration into various projects.
- Operating Temperature: -10°C to +70°C
- Interface: 3-pin interface (VCC, GND, Signal)
- Compatibility: Compatible with Arduino and other microcontrollers with digital and analog input capabilities.
SKU: n/a -
Sensors, Arduino, Modules and Motors
Arduino KY-032 Obstacle Avoidance Sensor Module
Arduino KY 032 Sensor Module Specifications:
- Operating Voltage: 3.3V to 5V
- Detection Range: Adjustable, typically 2cm to 30cm
- Operating Current: <25mA
- Output Type:
- Digital Output (D0): High/Low signal indicating obstacle presence
- Analog Output (A0): Voltage proportional to the distance from the obstacle
- Indicator: Built-in status LED
- Dimensions: 30mm x 14mm x 8mm (L x W x H)
- Mounting Holes: Yes, for convenient installation
- Interface: 3-pin header for easy connection to Arduino
- Material: Quality materials for durability and reliability in various environments.
Â
SKU: n/a -
Arduino
Arduino Nano Sensor Shield I/O Expansion Board
Arduino Nano Sensor Shield I/O Expansion Board Specifications:
- Dimensions: Compatible with the Arduino NANO form factor.
- Operating Voltage: 5V DC
- Input Voltage (recommended): 7-12V
- Digital Pins: 14 (including 6 PWM outputs)
- Analog Pins: 8
- I2C Ports: 1
- SPI Ports: 1
- UART Ports: 1
- Current per I/O Pin: 20mA
- Flash Memory: 32KB (of which 2KB used by bootloader)
- SRAM: 2KB
- EEPROM: 1KB
- Clock Speed: 16MHz
3.3V outputSKU: n/a -
Arduino
Arduino Pro Mini 328 3.3V/8MHz
Arduino Pro Mini 328Â Specifications:
- ATmega328 running at 8MHz with external resonator (0.5% tolerance)
- Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers, sensors, etc)
- 0.8mm Thin PCB
- USB connection off board
- Weighs less than 2 grams!
- Supports auto-reset
- 3.3V regulator
- Max 150mA output
- Over current protected
- DC input 3.3V up to 12V
- On board Power and Status LEDs
- Analog Pins: 8
- Digital I/Os: 14
- 0.7×1.3″ (18x33mm)
SKU: n/a -
Arduino, Project Boards
Arduino Prototype Shield with 170 Pinhole Breadboard
Arduino Prototype Shield Features
- Reset button up top
- ICSP header
- Lots of GND and +5V rails
- DIP prototyping area makes it easy to add more chips
- SOIC prototyping area above USB jack for up to 14-pin SOIC chip, narrow medium or wide package.
- A ‘mini’ breadboard included
- Extra 6mm (0.24 in) button
SKU: n/a -
Arduino
Arduino TFT Display 3.2 Inch LCD
Arduino TFT Display 3.2 Inch LCD Features:
- Support Arduino Mega2560 Directly inserted
- With a Full-angle IPS TFT panel
- OnBorad level conversion chip for 5V/3.3V MCU
- Compatible with 3.3/5 V operation voltage level
- Compatible with Arduino-Series Development Board.
- (Please notice: This Screen is not a touch screen)
- Provided 12-examples with Arduino,3-examples with STM32
- With an SD Card Socket
- With SPI FLASH circuit
Specifications:
- Driver IC: ILI9481
- Screen Size: 3.2 inch
- Display Size : 67.68(W) * 45.12(L) (mm)
- Backlight Type: Highlighting White 6 LED
- Screen Resolution: 480 * 320 Pixel (HVGA)
- Power Consumption : 80~110(mA)
- Screen Type: TFT (IPS Whole Perspective)
- Power : 5V / 3.3V
- Touch Function: None
- Data Bus: 16 Channels Parallel Bus
- Module Interface : 36Pin (Compatible with Arduino Mega2560)
- Size : 89.92(W) * 54.25(L) (mm)
SKU: n/a -
Arduino
Arduino Uno R3
Arduino Uno R3 board Specifications:
- It is an ATmega328P based Microcontroller
- The Operating Voltage of the Arduino is 5V
- The recommended input voltage ranges from 7V to 12V
- The i/p voltage (limit) is 6V to 20V
- Digital input and output pins 14
- Digital input & output pins (PWM)-6
- Analog i/p pins are 6
- DC Current for each I/O Pin is 20 mA
- DC Current used for 3.3V Pin is 50 mA
- Flash Memory -32 KB, and 0.5 KB memory is used by the boot loader
- SRAM is 2 KB
- EEPROM is 1 KB
- The speed of the CLK is 16 MHz
- In Built LED
- The length and width of the Arduino are 68.6 mm X 53.4 mm
- The weight of the Arduino board is 25 g
SKU: n/a -
-
Arduino
CAN-BUS Shield Arduino Uno
CAN BUS Shield Arduino Uno Specifications:
-
- Controller: MCP2515 CAN controller with SPI interface.
- Compatibility: Arduino Uno.
- CAN Protocol: Supports CAN 2.0B specification.
- Power Supply: 5V DC.
- Power Consumption: Low power consumption for efficient operation.
- Operating Voltage Range: Wide operating voltage range for flexibility (e.g., 3.3V to 5V).
- Indicator LEDs: Power and status LEDs for visual feedback.
- Dimensions: Compact form factor for easy integration into Arduino Uno projects.
- Operating Temperature: Suitable for a wide range of operating temperatures.
- Mounting Holes: Integrated mounting holes for secure attachment to Arduino Uno.
SKU: n/a -
