module
Showing 46–56 of 56 results
-
Modules and Motors
Serial Mp3 Module Sensor
Features:
- Support sampling frequency (kHz):8 / 11.025 / 12 / 16 / 22.05 / 24 / 32 / 44.1 / 48
- Support file format:MP3/WAV
- Support Micro SD card, Micro SDHC Card
- 30 class adjustable volume
- UART TTL serial control playback mode, baud rate is 9600bps
- Power supply can be 3.2 ~ 5.2VDC
- Size:43mm x 25mm
SKU: n/a -
Modules and Motors
TDA7297 Audio Amplifier Module
TDA7297 Audio Amplifier Module Specifications:
- Output Power: 15W + 15W (RMS)
- Supply Voltage: 6V – 18V DC
- Input Impedance: 22k ohms
- Signal-to-Noise Ratio (SNR): > 85 dB
- Total Harmonic Distortion (THD): < 0.05%
- Frequency Response: 20Hz – 20kHz
- Efficiency: > 90%
- Dimensions: 65mm x 56mm x 20mm (L x W x H)
- The Blue LED indicator light will be on when amplifier power on.
SKU: n/a -
Modules and Motors, Arduino, Raspberry Pi
TM1637 LED Display Module Tube For Arduino Raspberry PI
TM1637 LED Display Module Specifications:
- Using CMOS technology
- Display mode (6-Digit 8 Segment), support a total of positive digital tube output
- Key scan (8X2bit), enhanced anti-jamming key recognition circuit
- Gray scale adjustment circuit (duty cycle 8 adjustable)
- Two-wire serial interface (CLK, DIO)
SKU: n/a -
Modules and Motors
TP4056 1A Lithium Battery Charger Micro USB Module
TP4056 1A Lithium Battery Charger Micro USB Module Specifications:
-
-
- Input Voltage: 4.5V to 5.5V (micro-USB input)
- Charging Voltage: 4.2V
- Charging Current: 1A (adjustable with external resistor)
- Discharge Termination Voltage: 2.9V
- Operating Temperature: -10°C to 85°C
- Dimensions: 25mm x 19mm x 10mm
- Weight: Approximately 3 grams
-
SKU: n/a -
-
Modules and Motors
TP4056 1A Lithium Battery Charger Module
TP4056 1A Lithium Battery Charger Module Specifications:
- Input Voltage: 4.5V to 5.5V
- Charging Voltage: 4.2V
- Charging Current: 1A (adjustable with external resistor)
- Discharge Termination Voltage: 2.9V
- Operating Temperature: -10°C to 85°C
- Dimensions: 25mm x 19mm x 10mm
- Weight: Approximately 3 grams
SKU: n/a -
Modules and Motors
TTP229 Touch Keypad 16 Keys Capacitive Module 4×4
TTP229 Touch Keypad Specifications:
- Operating Voltage: 2.4V to 5.5V
- Operating Current: <2uA (standby), <16mA (active)
- 16 Touch Keys: Arranged in a 4×4 matrix
- Output Interface: I2C or Serial communication
- Adjustable Sensitivity: Yes
- Response Time: <60ms
- Dimensions: Approximately [insert dimensions]
- Mounting Holes: Yes
- Operating Temperature: -20°C to 70°C
- Storage Temperature: -40°C to 125°C
SKU: n/a -
Modules and Motors
USB 1200mA DC 2~5V to DC 5V Step up Boost Module
USB 1200mA DC 2~5V to DC 5V Step-up Boost Module Specifications:
- Input Voltage Range: 2~5V DC
- Output Voltage: 5V DC
- Output Current: Up to 1200mA (1.2A)
- Conversion Efficiency: High efficiency boosts conversion
- Protection: Overcurrent and overheating protection
- Indicator: LED status indicator
- Dimensions: Compact form factor for easy integration
- Application: Suitable for powering USB devices, Arduino projects, and various electronic applications requiring a 5V power supply.
SKU: n/a -
Modules and Motors, Arduino
W5100 Ethernet Network Module Mini For Arduino
W5100 Ethernet Network Module Specifications:
- Controller: Wiznet W5100
- Interface: SPI (Serial Peripheral Interface)
- Ethernet Speeds: 10Base-T and 100Base-TX
- MicroSD Card Slot: Yes
- Power Supply: 3.3V (via Arduino) or external power source
- Power Consumption: Low power consumption for energy-efficient operation
- Dimensions: Compact form factor for space-efficient integration
- Status LEDs: Power, Link, Full Duplex, and Speed
- Operating Temperature: -40°C to 85°C
SKU: n/a -
Modules and Motors
W5500 Ethernet Module
W5500 Ethernet Module Features
- Supports following Hardwired TCP/IP Protocols: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
- Supports 8 independent sockets simultaneously
- Supports Power down mode
- Supports Wake on LAN over UDP
- Supports High Speed Serial Peripheral Interface(SPI MODE 0, 3)
- Internal 32Kbytes Memory for Tx/Rx Buffers
- 10BaseT/100BaseTX Ethernet PHY embedded
- Support Auto Negotiation (Full and half duplex, 10 and 100-based)
- Not support IP Fragmentation
- 3.3V operation with 5V I/O signal tolerance
- LED outputs (Full/Half duplex, Link, Speed, Active)
SKU: n/a -
Arduino, Modules and Motors
ZMCT103C 5A AC Current Transformer Module
ZMCT103C 5A AC Current Transformer Module Specifications:
- On-board precision micro-current transformer
- On-board high-precision op-amp circuit, to do accurate sampling and appropriate compensation and other functions to signal
- The module can measure AC within 5A, corresponding output analog can be adjusted
- Under ideal conditions, the input voltage VCC is 3-35V, according to the potentiometer (adjust the amplification ratio, amplification range 0-100 times) to adjust the required output voltage, but the output (OUT) of the maximum voltage does not exceed 1 / 2 VCC.
- The output signal is the AC voltage signal, and the output signal voltage does not exceed the maximum 1 / 2VCC.
- PCB board size: 38 (mm) x 18.5 (mm)
SKU: n/a -
Modules and Motors, Arduino
ZMPT101B 250V AC Voltage Sensor Module For Arduino
Specifications:
- Measure within 250V AC
- Onboard micro-precision voltage transformer
- Analog output corresponding quantity can be adjusted.
- Good consistency, for voltage and power measurement
- Very efficient and accuracy
SKU: n/a