GY-291 ADXL345 Accelerometer
GY 291 Sensor ADXL345 Accelerometer Features
- Ultra low power: as low as 40µA in measurement mode and 0.1µA in standby mode at VS = 2.5V (typical)
- Power consumption scales automatically with bandwidth
- The user-selectable resolution, fixed 10-bit resolution, or full resolution, where resolution increases with g range, up to 13-bit resolution at ±16 g (maintaining 4 mg/LSB scale factor in all g ranges)
- Embedded, patent-pending FIFO technology minimizes host processor load
- Tap/double tap detection
- Activity/inactivity monitoring
- Free-fall detection
- Supply voltage range: 2.0V to 3.6V
- I/O voltage range: 1.7V to VS
₨375
CompareGY 291 Sensor ADXL345 Accelerometer is an ultra-low-power digital accelerometer that has an output data range that scales from 0.1Hz to 3.2kHz, unlike competing devices, which have fixed 100Hz, 400Hz, or 1kHz data rates. This allows portable system designers to better manage energy consumption by precisely allocating power for a given system function and reserving unused power for other uses.
The ADXL345 measures dynamic acceleration resulting from motion or shock and with a 10,000-g shock rating is well suited for applications such as hard-disk drive protection in personal computers.
Featuring a resolution of 4-milli-g/LSB (least significant bit) across all g ranges, single tap and double tap detection, activity and inactivity detection, free-fall detection, and user-programmable threshold levels, the new accelerometer also includes I2C and three- and four-wire SPI (serial peripheral interface) digital interfaces and a voltage range of 1.8V to 3.6V.
Based on 0 reviews
Be the first to review “GY-291 ADXL345 Accelerometer”
You must be logged in to post a review.
Related products
-
Modules and Motors
RC522 RFID Card Reader
RC522 RFID Card Reader Features and Benefits
- Highly integrated analog circuitry to demodulate and decode responses
- Buffered output drivers for connecting an antenna with the minimum number of external components
- Supports ISO/IEC 14443 A/MIFARE and NTAG
- The typical operating distance in Read/Write mode is up to 50 mm depending on the antenna size and tuning
- Supports MF1xxS20, MF1xxS70 and MF1xxS50 encryption in Read/Write mode
- Supports ISO/IEC 14443 A higher transfer speed communication up to 848 kBd
- Supports MFIN/MFOUT
- Additional internal power supply to the smart card IC connected via MFIN/MFOUT
- Supported host interfaces
- SPI up to 10 Mbit/s
- I 2C-bus interface up to 400 kBd in Fast mode, up to 3400 kBd in High-speed mode
- RS232 Serial UART up to 1228.8 kBd, with voltage levels dependent on the pin voltage supply
- FIFO buffer handles 64-byte send-and-receive
- Flexible interrupt modes
- Hard reset with low power function
- Power-down by software mode
- Programmable timer
- Internal oscillator for connection to 27.12 MHz quartz crystal
- 2.5 V to 3.3 V power supply
- CRC coprocessor
- Programmable I/O pins
- Internal self-test
SKU: n/a -
-
-
Modules and Motors
PL2303 USB To TTL RS232 Converter Adapter Module
PL2303 USB To TTL Converter RS232 Specifications:
- Chipset: PL2303
- Interface: USB 2.0
- Voltage Levels: 3.3V or 5V selectable
- Indicators: Power and data transmission LEDs
- Compatibility: Windows, Linux, macOS
- Dimensions: Compact form factor for easy integration
- Driver Support: Included for easy installation
- Applications: Programming, debugging, and interfacing with microcontrollers and Arduino boards
SKU: n/a -
Modules and Motors
HC06 HC09 Bluetooth Module
HC06 HC09 Bluetooth Module firmware are the modules which are factory set to be Master or Slave modules. Master and slave mode cannot be switched from the factory setting. HC-04 is an industrial grade product, HC-06 is a commercial grade product.
The modules with the HC-09 firmware are replacements for the HC-06 and HC-07 modules.
SKU: n/a
There are no reviews yet.