HC-SR04 Ultrasonic Sensor Module
HC SR04 Ultrasonic Sensor Module Specifications:
- Operating Voltage: 5V DC
- Operating Current: <15mA
- Operating Frequency: 40 kHz
- Measuring Angle: 15 degrees
- Trigger Input Pulse: 10μs minimum TTL pulse
- Echo Output Pulse: Output pulse proportional to distance
- Minimum Detection Distance: 2cm
- Maximum Detection Distance: 400cm
- Resolution: 0.3 cm
- Dimensions: 45mm x 20mm x 15mm
- Weight: 5g
₨180
CompareThe HC SR04 Ultrasonic Sensor Module is a versatile and cost-effective distance-measuring device designed for a wide range of applications. Leveraging ultrasonic technology, this module enables accurate and non-contact distance measurements with high precision. Its compact design and easy integration make it a popular choice for hobbyists, engineers, and developers working on projects that require reliable distance sensing.
The HC SR04 Ultrasonic Sensor Module is a versatile and cost-effective distance-measuring device designed for a wide range of applications. Leveraging ultrasonic technology, this module enables accurate and non-contact distance measurements with high precision. Its compact design and easy integration make it a popular choice for hobbyists, engineers, and developers working on projects that require reliable distance sensing.
HC SR04 Ultrasonic Sensor Module Price in Pakistan
Based on 0 reviews
Be the first to review “HC-SR04 Ultrasonic Sensor Module”
You must be logged in to post a review.
Related products
-
-
Sensors, Arduino, Modules and Motors
801S Vibration Shock Sensor For Arduino
801S Vibration Shock Sensor For Arduino Specifications:
- Operating Voltage: 3.3V – 5V DC
- Current Consumption: <1mA
- Output Type:
- Digital Output: High/Low (TTL)
- Analog Output: 0V to Vcc (0 – 5V)
- Detection Range: Adjustable via sensitivity potentiometer
- Frequency Response: 10Hz – 10kHz
- Dimensions: 32mm x 14mm x 7mm
- Mounting Holes: Two mounting holes for easy integration into various projects.
- Operating Temperature: -10°C to +70°C
- Interface: 3-pin interface (VCC, GND, Signal)
- Compatibility: Compatible with Arduino and other microcontrollers with digital and analog input capabilities.
SKU: n/a -
Analog and Digital Converters
DC 4.5-40V To 5V 2A USB Charger DC-DC Step-down Buck Converter Voltmeter Module
Analog and Digital ConvertersDC 4.5-40V To 5V 2A USB Charger DC-DC Step-down Buck Converter Voltmeter Module
DC 4.5-40V USB Charger Converter Voltmeter Module Specifications:
- Input Voltage Range: 4.5V – 40V
- Output Voltage: 5V
- Output Current: Up to 2A
- Conversion Efficiency: >90%
- Display Accuracy: ±0.1V
- Operating Temperature: -40°C to +85°C
- Dimensions: (L x W x H) 60mm x 21mm x 14mm
- Weight: 15g
- Protection: Overcurrent, Overvoltage, Short Circuit
- Connector Type: Screw terminals for input and output
- Display Type: LED Voltmeter
SKU: n/a -
Arduino, Modules and Motors
ZMCT103C 5A AC Current Transformer Module
ZMCT103C 5A AC Current Transformer Module Specifications:
- On-board precision micro-current transformer
- On-board high-precision op-amp circuit, to do accurate sampling and appropriate compensation and other functions to signal
- The module can measure AC within 5A, corresponding output analog can be adjusted
- Under ideal conditions, the input voltage VCC is 3-35V, according to the potentiometer (adjust the amplification ratio, amplification range 0-100 times) to adjust the required output voltage, but the output (OUT) of the maximum voltage does not exceed 1 / 2 VCC.
- The output signal is the AC voltage signal, and the output signal voltage does not exceed the maximum 1 / 2VCC.
- PCB board size: 38 (mm) x 18.5 (mm)
SKU: n/a -
Modules and Motors
CH340 USB To TTL Converter Adapter Module
Features:
- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
- TTL interface output, easy to connect to your MCU.
- Status LED.
- Dual 3.3V and 5V Power output, work with 3.3v and 5v target device.
- Size:55mm * 16mm
SKU: n/a
There are no reviews yet.