-
-
Sensors, Tools & Instruments
STC3028 Digital Temperature And Humidity Controller
STC3028 Digital Temperature And Humidity Controller Specifications:
- Technical Parameters:
- Temperature measuring range: -20-80℃ Measuring humidity range:00%RH~+100%RH
- Accuracy: 0.1℃ Power supply: DC 12V/DC 24V/AC 110-220V
- Sensor: NTC sensor Relay contact capacity: Cool (10A/240VAC);
- Heat (10A/240VAC) Sensor length: 1 meter (including the probe)
- Shell material: PC and ABS
SKU: n/a
-
-
Analog and Digital Converters
MCP3208 IC
MCP3208 IC Features:
- Analogue inputs programmable as single-ended or pseudo-differential pairs
- Single supply operation from 2.7V to 5.5V
- The maximum sampling rate is 100KSPS at VDD=5V
- The maximum sampling rate is 50KSPS at VDD=2.7V
- Low-power CMOS technology
- Industrial temperature ranges from -40°C to 85°C
SKU: n/a -
Micro Controllers
PIC18F4520 Microcontroller 18F4520
Application of PIC18F4520 Microcontroller
This is a basic Mid-range 8-bit microcontroller unit that can be used in the following applications-Â
- Input-Output operations
- Control Applications
- Analog data Processing
- Sensors integration and data logging
- Small scale, low cost embedded application based production
SKU: n/a -
Micro Controllers
PIC18F452 Microcontroller 18F452
PIC18F452 Microcontroller Specifications:
- High-performance RISC CPU – Up to 10MIPs operation & 16-bit wide instructions, 8-bit wide data path
- Peripheral – 3 external interrupt pins, master synchronous serial port (MSSP) module
- Analogue – Programmable low voltage detection (PLVD) and programmable brown-out reset (BOR)
- Flash/data EEPROM retention of >40 years
- Self-reprogrammable under software control
- Watchdog timer (WDT) with its own on-chip RC oscillator for reliable operation
- Programmable code protection
- Power-saving sleep mode
- Single supply 5V In-Circuit Serial Programmingâ„¢ (ICSPâ„¢) via two pins
- In-circuit debug (ICD) via two pins
- CMOS technology – Low power, high-speed flash/EEPROM technology
SKU: n/a -
Micro Controllers
PIC16F876 Microcontroller 16F876
PIC16F876 Microcontroller Features
- Only 35 single-word instructions to learn
- All single-cycle instructions except for program branches, which are two-cycle
- Operating speed: DC – 20 MHz clock input, DC – 200 ns instruction cycle
- Up to 8K x 14 words of Flash Program Memory, Up to 368 x 8 bytes of Data Memory (RAM), Up to 256 x 8 bytes of EEPROM Data Memory
- Pinout compatible to other 28-pin or 40/44-pin PIC16CXXX and PIC16FXXX microcontrollers
SKU: n/a -
Micro Controllers
PIC16F877 Microcontroller 16F877
PIC16F877 Microcontroller Features & Specifications:
- It is a 40-pin microcontroller and uses RISC architecture.
- It includes five Ports Port A, Port B, Port C, Port D & Port E.
- This microcontroller includes 3-timers where 2- 2-timers are 8-bit Timers and one is 16-bit.
- This microcontroller supports various communication protocols such as serial, I2C, and parallel.
- This PIC microcontroller supports both timer & hardware pin interrupts.
- It includes 35 smaller instruction sets.
- Its operating frequency is up to 20MHz.
- The operating voltage ranges from 4.2V to 5.5 volts.
SKU: n/a -
Micro Controllers
ATMega8 Microcontroller AVR
Applications
There are hundreds of applications for ATMEGA8.
- Industrial control systems.
- SMPS and Power Regulation Systems.
- Analog signal measuring and manipulations.
- Embedded systems like coffee machines, and vending machines.
- Motor control systems.
- Display units.
- Peripheral Interface system.
SKU: n/a -
-
Micro Controllers
AT89C51 Microcontroller 89C51
AT89C51 Microcontroller Features
- Compatible with MCS-51â„¢ Products
- 4K Bytes of In-System Reprogrammable Flash Memory – Endurance: 1,000 Write/Erase Cycles
- Fully Static Operation: 0 Hz to 24 MHz
- Three-level Program Memory Lock
- 128 x 8-bit Internal RAM
- 32 Programmable I/O Lines
- Two 16-bit Timer/Counters
- Six Interrupt Sources
- Programmable Serial Channel
- Low-power Idle and Power-down Modes
SKU: n/a -
STM Boards
STM32F429 Discovery Board
STM32F429 Discovery Board Features
- STM32F429ZIT6 microcontroller featuring 2 Mbytes of Flash memory, 256 Kbytes of RAM in an LQFP144 package
- On-board ST-LINK/V2 on STM32F429I-DISCO (old order code) or ST-LINK/V2-B on STM32F429I-DISC1 (new order code)
- mbed™ -enabled (see http://mbed.org) with the new order code only
- USB functions:
- Debug port
- Virtual COM port (with new order code only)
- Mass storage (with new order code only)
- STM32F4 Discovery – Arm Cortex M4 Processor kit in Pakistan
- Board power supply: through the USB bus or from an external 3 V or 5 V supply voltage
- 2.4″ QVGA TFT LCD
- 64-Mbit SDRAM
- L3GD20, ST-MEMS motion sensor 3-axis digital output gyroscope
SKU: n/a -
Modules and Motors
MG946R Servo Motor
MG946R Servo Motor Features:Â
- Power: 4.8V – 6V DC max (5V works well)
- Average Speed: 60 degrees in 0.20 sec (@ 4.8V), 60 degrees in 0.16 sec (@ 6.0V)
- Weight: 62.41g
- Torque: At 4.8V: 8.5 kg-cm / 120 oz-in, and at 6V: 10 kg-cm / 140 oz-in.
- Size mm: (L x W x H) 40.7 x 19.7 x 42.9
SKU: n/a -
Modules and Motors
VS838 IR Infrared Receiver Module
VS838 Infrared Receiver Module IR Features
- Product Name: Infrared Remote Control Receiver Module;
- Model Number: VS838;
- Working Voltage:2.7V to 5.5V
- Distance: 15M;
- : +/- 45 Degree;
- Low Level Voltage : 0.4V;High Level Voltage : 4.5V;
- Body Size : 7 x 6 x 5.4mm / 0.27″x 0.23″ x 0.21″(L*W*T);
- Pin Length:22mm / 0.87″
- Pitch: 2mm / 0.08″
- Material: Plastic, Alloy;
- Color: Black, Silver Tone
- Weight: 5g
SKU: n/a -
Sensors
DS18B20 Temperature Sensor
DS18B20 Temperature Sensor Key Features
- Unique 1-Wire® Interface Requires Only One Port Pin for Communication
- Reduce Component Count with Integrated Temperature Sensor and EEPROM
- Measures Temperatures from -55°C to +125°C (-67°F to +257°F)
- ±0.5°C Accuracy from -10°C to +85°C
- Programmable Resolution from 9 Bits to 12 Bits
- No External Components Required
- Parasitic Power Mode Requires Only 2 Pins for Operation (DQ and GND)
- Simplifies Distributed Temperature-Sensing Applications with Multidrop Capability
- Each Device Has a Unique 64-bit Serial Code Stored in an On-Board ROM
- Flexible User-Definable Nonvolatile (NV) Alarm Settings with Alarm Search Command Identifies Devices with Temperatures Outside Programmed Limits
- Available in 8-Pin SO (150 mils), 8-Pin µSOP, and 3-Pin TO-92 Packages
SKU: n/a -
Modules and Motors
QTR-5RC Line Sensor Obstacle Avoidance Infrared Tracking Sensor Module
QTR 5RC Line Sensor Specifications:
- Sensor Type: Infrared (IR) Line Sensor
- Probe Configuration: 5-Way Infrared Probe
- Compatibility: Arduino Robot and Smart Car Kits
- Sensitivity: High Sensitivity for Accurate Detection
- Functionality: Line Tracking, Obstacle Avoidance
- Integration: Easily integrates with Arduino platforms
- Compact Design: Space-efficient and suitable for various robotic applications
- Power Requirement: Compatible with standard power sources used in Arduino projects
- Dimensions: Compact dimensions for easy incorporation into robotic systems
- Application: Suitable for hobbyist robotics, educational projects, and smart car applications
SKU: n/a -
Analog and Digital Converters
ADS1115 16-Bit ADC 4 Channel Module with Programmable Gain Amplifier
ADS1115 Module 16-bit ADC 4 Channel Specifications:
- WIDE SUPPLY RANGE: 2.0V to 5.5V
- LOW CURRENT CONSUMPTION: Continuous Mode: Only 150µA Single-Shot Mode: Auto Shut-Down
- PROGRAMMABLE DATA RATE: 8SPS to 860SPS
- INTERNAL LOW-DRIFT VOLTAGE REFERENCE
- INTERNAL OSCILLATOR
- INTERNAL PGA
- I2C INTERFACE: Pin-Selectable Addresses
- FOUR SINGLE-ENDED OR TWO DIFFERENTIAL INPUTS
- PROGRAMMABLE COMPARATOR
- This board/chip uses I2C 7-bit addresses between 0x48-0x4B, selectable with jumpers
SKU: n/a -
Modules and Motors, Analog and Digital Converters
LTC1871 Boost Power Module High Power DC-DC 100W Adjustable Output 3.5-35v Step up Power Supply Converter Module Board with LED Digital Display Voltmeter
Modules and Motors, Analog and Digital ConvertersLTC1871 Boost Power Module High Power DC-DC 100W Adjustable Output 3.5-35v Step up Power Supply Converter Module Board with LED Digital Display Voltmeter
Specifications:
- Â Input voltage range: 3.5V-30V(Note: 30V is the maximum voltage when used please make sure input is lower than 30V, otherwise will burn out.)
- Output voltage range: 3.5V-30V (boost mode, the input must be less than or equal to the output voltage)
- Maximum input current: 10A (peak current)
- Continuous Current: 6A
- Size: 67cm(L) * 42cm(W) * 18cm(H)
- Output power: Max 100W {Note: according to the law of conservation of power, computation under the condition of rated output current: Uin*Iin*efficiency =Uout*Iout(Uin: input voltage, Iin: input current)}
- Weight: 35g
- Color: Red
- Voltmeter Accuracy: ± (5 ‰ + 1 digit)
- Static power consumption: Typical about 15mA(With the input voltage, output voltage and the color closely related to the digital pipe. The actual current there is a deviation)
- IN +: Positive Input, IN-: Negative Input. OUT +: Positive output, OUT-: Negative output.
SKU: n/a
Products Grid
Best Sellers
Recently Added
Analog and Digital Converters
MCP3208 IC
MCP3208 IC Features:
Analogue inputs programmable as single-ended or pseudo-differential pairs
Single supply operation from 2.7V to 5.5V
The maximum sampling rate is 100KSPS at VDD=5V
The maximum sampling rate is 50KSPS at VDD=2.7V
Low-power CMOS technology
Industrial temperature ranges from -40°C to 85°C
SKU: n/a
Analog and Digital Converters
MAX488 IC
MAX488 IC Key Features
Low Power Consumption Minimizes Thermal Dissipation, Reducing System Cost
120µA to 500µA Quiescent Current
Shutdown Current of 0.1µA
Single 5V Supply Voltage
Slew-Rate-Limited Drivers (MAX483/MAX487/MAX488 and MAX489)
Up to 250kbps Data Rate
Unlimited Drivers: Up to 2.5Mbps Data Rate
Integrated Protection Enhances System Robustness
Short Circuit Current Limited Driver
Integrated Thermal Shutdown
Receiver Fail-Safe for Input Open Circuit
Guarantees Logic High
1/4 Unit Loading (MAX487/ MAX1487 only) Allows Up to 128 Devices on a Single Bus
48kΩ Receiver Input Resistance
SKU: n/a
Analog and Digital Converters
Max487 IC
Max487 IC Key Features
Low Power Consumption Minimizes Thermal Dissipation, Reducing System Cost
120µA to 500µA Quiescent Current
Shutdown Current of 0.1µA
Single 5V Supply Voltage
Slew-Rate-Limited Drivers (MAX483/MAX487/MAX488 and MAX489)
Up to 250kbps Data Rate
Unlimited Drivers: Up to 2.5Mbps Data Rate
Integrated Protection Enhances System Robustness
Short Circuit Current Limited Driver
Integrated Thermal Shutdown
Receiver Fail-Safe for Input Open Circuit
Guarantees Logic High
1/4 Unit Loading (MAX487/ MAX1487 only) Allows Up to 128 Devices on a Single Bus
48kΩ Receiver Input Resistance
SKU: n/a
Analog and Digital Converters
Max485 IC
Max485 ICÂ Key Features
Low Power Consumption Minimizes Thermal Dissipation, Reducing System Cost
120µA to 500µA Quiescent Current
Shutdown Current of 0.1µA
Single 5V Supply Voltage
Slew-Rate-Limited Drivers (MAX483/MAX487/MAX488 and MAX489)
Up to 250kbps Data Rate
Unlimited Drivers: Up to 2.5Mbps Data Rate
Integrated Protection Enhances System Robustness
Short Circuit Current Limited Driver
Integrated Thermal Shutdown
Receiver Fail-Safe for Input Open Circuit
Guarantees Logic High
1/4 Unit Loading (MAX487/ MAX1487 only) Allows Up to 128 Devices on a Single Bus
48kΩ Receiver Input Resistance
SKU: n/a
Analog and Digital Converters
Max232 IC
Max232 IC Features
RS-232 Bus-Terminal ESD Protection Exceeds
±15 kV Using Human-Body Model (HBM)
±15 kV Using Human-Body Model (HBM)
Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU V.28 Standards
Operates With 3-V to 5.5-V VCCÂ Supply
Operates up to 250 kbit/s
Two Drivers and Two Receivers
Low Supply Current: 300 µA Typical
External Capacitors: 4 × 0.1 µF
Accepts 5-V Logic Input With 3.3-V Supply
Alternative High-Speed Terminal-Compatible Devices (1 Mbit/s)
SN65C3232 (–40°C to 85°C)
SN75C3232 (0°C to 70°C)
SKU: Max232-Converter
Micro Controllers
PIC18F46K22 Microcontroller 18F46K22
PIC18F46K22 Microcontroller Features
C Compiler Optimized Architecture:
Optional extended instruction set designed to optimize re-entrant code
Up to 1024 Bytes Data EEPROM
Up to 64 Kbytes Linear Program Memory Addressing
Up to 3896 Bytes Linear Data Memory Addressing
Up to 16 MIPS Operation
16-bit Wide Instructions, 8-bit Wide Data Path
Priority Levels for Interrupts
31-Level, Software Accessible Hardware Stack
8 x 8 Single-Cycle Hardware Multiplier
SKU: n/a
Analog and Digital Converters
MCP2551 High-speed CAN Transceiver
Features
Slope control input
Supports 1 Mb/s operation
Implements ISO-11898 standard physical layer requirements
Suitable for 12V and 24V systems
Externally-controlled slope for reduced RFI emissions
Permanent dominant detect
Low current standby operation
High noise immunity due to differential bus implementation
SKU: n/a
Micro Controllers
PIC18F458 Microcontroller 18F458
Features
High-Performance RISC CPU
– Source code compatible with the PIC16 and PIC17 instruction sets
– Linear data memory addressing to 4 kilobytes
– Linear program memory addressing to 2 Mbytes
– DC – 40 MHz osc./clock input
– 16-bit wide instructions, 8-bit wide data path
– Priority levels for interrupts
– 8 x 8 Single Cycle Hardware Multiplier
– 32K Flash Program Memory
– 1536 Byte RAM Data Memory
– 256 Byte RAM Data Memory
“>
SKU: PIC18F458-Microcontroller
Micro Controllers
PIC18F4550 Microcontroller 18F4550
PIC18F4550 Microcontroller Features
Compact and ready-to-use design
Professional and Fully EMI/RFI Complaint PCB Layout Design for Noise Reduction
High Quality Two layer PTH PCB
Board Supports PIC 16F877/18F 4520/4580 Microcontrollers
No separate programmer is required (Built-in Boot loader)
No Separate power adapter is required (USB power source)
Screw terminal for External Power Supply (with Jumper Select Option)
External Power Supply range of 7V to 20V
adaptor (any standard 9-12V power supply) option
RS-232 Interface (For direct connection to PC’s serial port)
<script src="moz-extension://f26db0f4-f100-4dfb-9692-7da94f91d630/js/app.js" type="text/javascript">
SKU: n/a
Micro Controllers
PIC18F4520 Microcontroller 18F4520
Application of PIC18F4520 Microcontroller
This is a basic Mid-range 8-bit microcontroller unit that can be used in the following applications-Â
Input-Output operations
Control Applications
Analog data Processing
Sensors integration and data logging
Small scale, low cost embedded application based production
SKU: n/a
Micro Controllers
PIC16F73 Microcontroller 16F73
PIC16F73 Microcontroller Features
20 MHz Max. CPU Speed
35 Instructions
8 Level Hardware Stack
22 I/O Pins – PIC16F73/76 Models
33 I/O Pins – PIC16F74/77 Models
Power-On Reset (POR)
Power-Up Timer (PWRT)
Oscillator Start-Up Timer (OST)
Brown-Out Reset (BOR)
Watchdog Timer (WDT)
In-Circuit Serial Programming (ICSP)
In-Circuit Debug (ICD)
SKU: n/a
Micro Controllers
PIC18F452 Microcontroller 18F452
PIC18F452 Microcontroller Specifications:
High-performance RISC CPU – Up to 10MIPs operation & 16-bit wide instructions, 8-bit wide data path
Peripheral – 3 external interrupt pins, master synchronous serial port (MSSP) module
Analogue – Programmable low voltage detection (PLVD) and programmable brown-out reset (BOR)
Flash/data EEPROM retention of >40 years
Self-reprogrammable under software control
Watchdog timer (WDT) with its own on-chip RC oscillator for reliable operation
Programmable code protection
Power-saving sleep mode
Single supply 5V In-Circuit Serial Programmingâ„¢ (ICSPâ„¢) via two pins
In-circuit debug (ICD) via two pins
CMOS technology – Low power, high-speed flash/EEPROM technology
SKU: n/a
Micro Controllers
PIC16F887 Microcontroller 16F887
PIC16F887 Microcontroller 16F887 Applications
Design requiring many ADC channels
Battery Operated Low Power applications
Design requiring Multiple I/O interfaces and communications
Ideal for more advanced level A/D applications in automotive, industrial, appliances and consumer applications.
SKU: n/a
Micro Controllers
PIC16F876 Microcontroller 16F876
PIC16F876 Microcontroller Features
Only 35 single-word instructions to learn
All single-cycle instructions except for program branches, which are two-cycle
Operating speed: DC – 20 MHz clock input, DC – 200 ns instruction cycle
Up to 8K x 14 words of Flash Program Memory, Up to 368 x 8 bytes of Data Memory (RAM), Up to 256 x 8 bytes of EEPROM Data Memory
Pinout compatible to other 28-pin or 40/44-pin PIC16CXXX and PIC16FXXX microcontrollers
SKU: n/a
Micro Controllers
PIC16F877 Microcontroller 16F877
PIC16F877 Microcontroller Features & Specifications:
It is a 40-pin microcontroller and uses RISC architecture.
It includes five Ports Port A, Port B, Port C, Port D & Port E.
This microcontroller includes 3-timers where 2- 2-timers are 8-bit Timers and one is 16-bit.
This microcontroller supports various communication protocols such as serial, I2C, and parallel.
This PIC microcontroller supports both timer & hardware pin interrupts.
It includes 35 smaller instruction sets.
Its operating frequency is up to 20MHz.
The operating voltage ranges from 4.2V to 5.5 volts.
SKU: n/a
Micro Controllers
PIC16F88 Microcontroller 16F88
PIC16F88 Microcontroller Specifications:
Manufacturer: Microchip
Family Name: PIC16F
Package Type: PDIP
Mounting Type: Through Hole
Pin Count: 18
Device Core: PIC
Data Bus Width: 8bit
Program Memory Size: 7.168 kB, 256 B
Maximum Frequency: 20MHz
SKU: n/a
