LCDs
2.4 Inch TFT LCD For Arduino
2.4 Inch TFT LCD Arduino Specifications:
- 2.4″ diagonal LCD TFT display
- 240×320 resolution
- 5V compatible! Use with 3.3V or 5V logic
- Onboard 3.3V 300mA LDO regulator
- 8-bit digital interface, plus 4 control lines
- 4-wire resistive touchscreen
- Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, and 3 and analog 4 and 5. Pin 12 is available if not using the microSD
₨2,200
CompareThe 2.4-inch TFT LCD Arduino is a compact and versatile display module designed for use with Arduino boards. This high-resolution color screen provides a vibrant and clear interface, making it ideal for various DIY electronics projects, educational purposes, and prototyping applications. With easy compatibility and a user-friendly interface, this TFT LCD enhances the visual experience of your Arduino projects.
Related products
-
Arduino
Arduino Nano Sensor Shield I/O Expansion Board
Arduino Nano Sensor Shield I/O Expansion Board Specifications:
- Dimensions: Compatible with the Arduino NANO form factor.
- Operating Voltage: 5V DC
- Input Voltage (recommended): 7-12V
- Digital Pins: 14 (including 6 PWM outputs)
- Analog Pins: 8
- I2C Ports: 1
- SPI Ports: 1
- UART Ports: 1
- Current per I/O Pin: 20mA
- Flash Memory: 32KB (of which 2KB used by bootloader)
- SRAM: 2KB
- EEPROM: 1KB
- Clock Speed: 16MHz
3.3V outputSKU: n/a -
Sensors, Arduino, Modules and Motors
801S Vibration Shock Sensor For Arduino
801S Vibration Shock Sensor For Arduino Specifications:
- Operating Voltage: 3.3V – 5V DC
- Current Consumption: <1mA
- Output Type:
- Digital Output: High/Low (TTL)
- Analog Output: 0V to Vcc (0 – 5V)
- Detection Range: Adjustable via sensitivity potentiometer
- Frequency Response: 10Hz – 10kHz
- Dimensions: 32mm x 14mm x 7mm
- Mounting Holes: Two mounting holes for easy integration into various projects.
- Operating Temperature: -10°C to +70°C
- Interface: 3-pin interface (VCC, GND, Signal)
- Compatibility: Compatible with Arduino and other microcontrollers with digital and analog input capabilities.
SKU: n/a -
Arduino
Arduino TFT Display 3.2 Inch LCD
Arduino TFT Display 3.2 Inch LCD Features:
- Support Arduino Mega2560 Directly inserted
- With a Full-angle IPS TFT panel
- OnBorad level conversion chip for 5V/3.3V MCU
- Compatible with 3.3/5 V operation voltage level
- Compatible with Arduino-Series Development Board.
- (Please notice: This Screen is not a touch screen)
- Provided 12-examples with Arduino,3-examples with STM32
- With an SD Card Socket
- With SPI FLASH circuit
Specifications:
- Driver IC: ILI9481
- Screen Size: 3.2 inch
- Display Size : 67.68(W) * 45.12(L) (mm)
- Backlight Type: Highlighting White 6 LED
- Screen Resolution: 480 * 320 Pixel (HVGA)
- Power Consumption : 80~110(mA)
- Screen Type: TFT (IPS Whole Perspective)
- Power : 5V / 3.3V
- Touch Function: None
- Data Bus: 16 Channels Parallel Bus
- Module Interface : 36Pin (Compatible with Arduino Mega2560)
- Size : 89.92(W) * 54.25(L) (mm)
SKU: n/a -
Modules and Motors, Arduino
ZMPT101B 250V AC Voltage Sensor Module For Arduino
Specifications:
- Measure within 250V AC
- Onboard micro-precision voltage transformer
- Analog output corresponding quantity can be adjusted.
- Good consistency, for voltage and power measurement
- Very efficient and accuracy
SKU: n/a -
Modules and Motors, Arduino
W5100 Ethernet Network Module Mini For Arduino
W5100 Ethernet Network Module Specifications:
- Controller: Wiznet W5100
- Interface: SPI (Serial Peripheral Interface)
- Ethernet Speeds: 10Base-T and 100Base-TX
- MicroSD Card Slot: Yes
- Power Supply: 3.3V (via Arduino) or external power source
- Power Consumption: Low power consumption for energy-efficient operation
- Dimensions: Compact form factor for space-efficient integration
- Status LEDs: Power, Link, Full Duplex, and Speed
- Operating Temperature: -40°C to 85°C
SKU: n/a
There are no reviews yet.