Product Carousel Tabs
STC3028 Digital Temperature And Humidity Controller
STC3028 Digital Temperature And Humidity Controller Specifications:
18650 Lithium Battery Charger Protection Board Module
Specifications:
2DM860 Digital Stepper Driver
2DM860 Digital Stepper Driver Specifications:
433Mhz RF Transmitter and Receiver Module
<strong>Materials:
at first let’s take a look for what we need :
1) 2 Arduino Board “I used Uno”
2) RF 315MHz or 433MHz transmitter-receiver module .
3) jumper wire .
4) BreadBoard .
5)External Power supply (9V Battery *2) “Optional”
5815M RDA5815M QFN-20 Signal IC
5815M IC RDA5815M QFN-20 Signal IC Specifications:
ATtiny45 Microcontroller AVR
ATtiny45 Microcontroller Features
High Performance, Low Power AVR® 8-Bit Microcontroller
Advanced RISC Architecture – 120 Powerful Instructions – Most Single Clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation
Non-volatile Program and Data Memories
Robotic Arm 4 Degrees Of Freedom
USB based version with powerful prewritten BotBoarduino programs
• Advanced inverse kinematics positioning control
• Includes everything you need to control the arm with a separate PS2 controller
• Easily control a differentially-steered vehicle with the addition of a motor controller
Breadboard
Features:
2wd Car Chasis
Features:
ACS712 30A Range Current Sensor Module
Specifications:
TTP229 Touch Keypad 16 Keys Capacitive Module 4×4
TTP229 Touch Keypad Specifications:
TF Card U Disk MP3 Format Decoder Board Module Audio Player
TF Card U Disk Decoder Module Specifications:
DB25 Connector Female
Specifications:
Xeltek Superpro 6100N Universal Device Programmer
Features:
Products Carousel
Television Entertainment
Music
Trending Products
Bestsellers
Top Categories this Month
Recommendation for your manager
DB37 Cover
DB37 Cover Features :
DB50 Male Connector
Features
25 Pin Male to Female Cable
Features :
CD4049BM SOP
CD4049BE DIP
Features:
• CD4050B Noninverting
• High Sink Current for Driving 2 TTL Loads
• High-to-Low Level Logic Conversion
• 100% Tested for Quiescent Current at 20 V
• Maximum Input Current of 1 µA at 18 V Over Full Package Temperature Range; 100 nA at 18 V and 25°C
• 5-V, 10-V, and 15-V Parametric Ratings
XL1509 SOP 5V
Features
Wide 4.5V to 40V Input Voltage Range
3.3V,5V,12V, and adjustable versions
Output Adjustable from 1.23V to 37V
Maximum Duty Cycle 100%
Minimum Drop Out 1.5V
Fixed 150KHz Switching Frequency
2A Constant Output Current Capability
Internal Optimize Power Transistor
MCP6002-I/SN SOP
Features:
XTR115U SOP
XTR115U SOP Features
• Low quiescent current: 200 μA
• 5-V regulator for external circuits
• VREF for sensor excitation:
– XTR115: 2.5 V
– XTR116: 4.096 V
• Low span error: 0.05%
• Low nonlinearity error: 0.003%
• Wide loop supply range: 7.5 V to 36 V
• SO-8 package
L6388D SOP
Features
L6386D SOP
L6386D SOP Features:
400 mA SOURCE,
650 mA SINK
L6384D SOP
L6384D Features:
L6599 SOP
Features
■ 50 % duty cycle, variable frequency control of
resonant half-bridge
■ High-accuracy oscillator
■ Up to 500 kHz operating frequency
■ Two-level OCP: frequency-shift and latched
shutdown
■ Interface with PFC controller
■ Latched disable input
■ Burst-mode operation at light load
■ Input for power-ON/OFF sequencing or
brownout protection
■ Non-linear soft-start for monotonic output
voltage rise
■ 600 V-rail compatible high-side gate driver with
integrated bootstrap diode and high dV/dt
immunity
■ -300/800 mA high-side and low-side gate
drivers with UVLO pull-down
L6598 SOP
Features
High voltage rail up to 600 VdV/dt immunity ±50 V/ns in full temperature range
Driver current capability: 250 mA source450 mA sink
Switching times 80/40 ns rise/fall with 1 nF load
CMOS shutdown input
Undervoltage lockout
Soft-start frequency shifting timing
CD40106BM SOP
Features
1• Schmitt-Trigger Inputs
• Hysteresis Voltage (Typical):
– 0.9 V at VDD = 5 V
– 2.3 V at VDD = 10 V
– 3.5 V at VDD = 15 V
• Noise Immunity Greater Than 50%
• No Limit On Input Rise and Fall Times
• Standardized, Symmetrical Output Characteristics
• For Quiescent Current at 20 V
• Maximum Input Current Of 1 μA at 18 V Over Full
Package Temperature Range:
– 100 nA at 18 V and 25°C
• Low VDD and VSS Current During Slow Input
Ramp
• 5-V, 10-V, and 15-V Parametric Ratings
CD40106BE IC
Features:
1• Schmitt-Trigger Inputs
• Hysteresis Voltage (Typical):
– 0.9 V at VDD = 5 V
– 2.3 V at VDD = 10 V
– 3.5 V at VDD = 15 V
• Noise Immunity Greater Than 50%
• No Limit On Input Rise and Fall Times
• Standardized, Symmetrical Output Characteristics
• For Quiescent Current at 20 V
• Maximum Input Current Of 1 μA at 18 V Over Full
Package Temperature Range:
– 100 nA at 18 V and 25°C
• Low VDD and VSS Current During Slow Input
Ramp
• 5-V, 10-V, and 15-V Parametric Ratings
